Compare commits
1 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
| 083242d4f1 |
7
.gitignore
vendored
7
.gitignore
vendored
@ -1,12 +1,7 @@
|
||||
*~
|
||||
*.pyc
|
||||
*.egg-info
|
||||
*.eggs/
|
||||
*.pybuild/
|
||||
__pycache__/
|
||||
__pycache__
|
||||
/build
|
||||
/dist
|
||||
/deb_dist
|
||||
/debian/stcgal*
|
||||
/debian/files
|
||||
/.vscode
|
||||
17
.travis.yml
17
.travis.yml
@ -1,17 +0,0 @@
|
||||
sudo: required
|
||||
dist: trusty
|
||||
language: python
|
||||
cache:
|
||||
- pip
|
||||
python:
|
||||
- "3.4"
|
||||
- "3.5"
|
||||
- "3.6"
|
||||
- "pypy3"
|
||||
before_install:
|
||||
- sudo apt install rpm dpkg-dev debhelper dh-python python3-setuptools fakeroot python3-serial python3-yaml
|
||||
install:
|
||||
- pip install pyusb
|
||||
script:
|
||||
- python setup.py build
|
||||
- python setup.py test
|
||||
240
README.md
240
README.md
@ -1,47 +1,243 @@
|
||||
[](https://travis-ci.org/grigorig/stcgal)
|
||||
|
||||
stcgal - STC MCU ISP flash tool
|
||||
===============================
|
||||
|
||||
stcgal is a command line flash programming tool for [STC MCU Ltd](http://stcmcu.com/).
|
||||
8051 compatible microcontrollers.
|
||||
stcgal is a command line flash programming tool for STC MCU Ltd. [1]
|
||||
8051 compatible microcontrollers. The name was inspired by avrdude [2].
|
||||
|
||||
STC microcontrollers have an UART/USB based boot strap loader (BSL). It
|
||||
STC microcontrollers have a UART based boot strap loader (BSL). It
|
||||
utilizes a packet-based protocol to flash the code memory and IAP
|
||||
memory over a serial link. This is referred to as in-system programming
|
||||
(ISP). The BSL is also used to configure various (fuse-like) device
|
||||
memory over a serial link. This is referred to as in-system programming (ISP).
|
||||
The BSL is also used to configure various (fuse-like) device
|
||||
options. Unfortunately, this protocol is not publicly documented and
|
||||
STC only provide a (crude) Windows GUI application for programming.
|
||||
|
||||
stcgal is a full-featured Open Source replacement for STC's Windows
|
||||
software; it supports a wide range of MCUs, it is very portable and
|
||||
suitable for automation.
|
||||
stcgal is a full-featured Open Source replacement for STC's Windows software;
|
||||
it supports a wide range of MCUs, it is very portable and suitable for automation.
|
||||
|
||||
[1] http://stcmcu.com/
|
||||
[2] http://www.nongnu.org/avrdude/
|
||||
|
||||
Supported MCU models
|
||||
--------------------
|
||||
|
||||
stcgal should fully support STC 89/90/10/11/12/15 series MCUs.
|
||||
|
||||
So far, stcgal was tested with the following MCU models:
|
||||
|
||||
* STC89C52RC (BSL version: 4.3C)
|
||||
* STC12C2052AD (BSL version: 5.8D)
|
||||
* STC12C5A60S2 (BSL version: 6.2I)
|
||||
* STC11F08XE (BSL version: 6.5M)
|
||||
* STC15F104E (BSL version: 6.7Q)
|
||||
* STC15F204EA (BSL version: 6.7R)
|
||||
* STC15L104W (BSL version: 7.1Q)
|
||||
* IAP15F2K61S2 (BSL version: 7.1S)
|
||||
|
||||
More compatibility testing is going to happen soon.
|
||||
|
||||
Features
|
||||
--------
|
||||
|
||||
* Support for STC 89/90/10/11/12/15/8 series
|
||||
* UART and USB BSL support
|
||||
* Display part info
|
||||
* Determine operating frequency
|
||||
* Program flash memory
|
||||
* Program IAP/EEPROM
|
||||
* Set device options
|
||||
* Read unique device ID (STC 10/11/12/15/8)
|
||||
* Trim RC oscillator frequency (STC 15/8)
|
||||
* Automatic power-cycling with DTR toggle or a custom shell command
|
||||
* Automatic UART protocol detection
|
||||
* Read unique device ID (STC 10/11/12/15)
|
||||
* Trim RC oscillator frequency (STC 15)
|
||||
|
||||
Further information
|
||||
-------------------
|
||||
Installation
|
||||
------------
|
||||
|
||||
[Installation](doc/INSTALL.md)
|
||||
stcgal requires Python 3.2 (or later) and pySerial. You can run stcgal
|
||||
directly with the included ```stcgal.py``` script. The recommended
|
||||
method for permanent installation is to use Python's setuptools. Run
|
||||
```./setup.py build``` to build and ```sudo ./setup.py install```
|
||||
to install stcgal. A permanent installation provides the ```stcgal```
|
||||
command.
|
||||
|
||||
[How to use stcgal](doc/USAGE.md)
|
||||
Usage
|
||||
-----
|
||||
|
||||
[Frequently Asked Questions](doc/FAQ.md)
|
||||
Call stcgal with ```-h``` for usage information.
|
||||
|
||||
[List of tested MCU models](doc/MODELS.md)
|
||||
```
|
||||
usage: stcgal.py [-h] [-P {stc89,stc12a,stc12,stc15a,stc15}] [-p PORT]
|
||||
[-b BAUD] [-l HANDSHAKE] [-o OPTION] [-t TRIM] [-D]
|
||||
[code_binary] [eeprom_binary]
|
||||
|
||||
stcgal 1.0 - an STC MCU ISP flash tool
|
||||
|
||||
positional arguments:
|
||||
code_binary code segment binary file to flash
|
||||
eeprom_binary eeprom segment binary file to flash
|
||||
|
||||
optional arguments:
|
||||
-h, --help show this help message and exit
|
||||
-P {stc89,stc12a,stc12,stc15a,stc15}, --protocol {stc89,stc12a,stc12,stc15a,stc15}
|
||||
protocol version
|
||||
-p PORT, --port PORT serial port device
|
||||
-b BAUD, --baud BAUD transfer baud rate (default: 19200)
|
||||
-l HANDSHAKE, --handshake HANDSHAKE
|
||||
handshake baud rate (default: 1200)
|
||||
-o OPTION, --option OPTION
|
||||
set option (can be used multiple times)
|
||||
-t TRIM, --trim TRIM RC oscillator frequency in kHz (STC15 series only)
|
||||
-D, --debug enable debug output
|
||||
```
|
||||
|
||||
Most importantly, ```-p``` sets the serial port to be used for programming.
|
||||
|
||||
### Protocols
|
||||
|
||||
STC MCUs use a variety of related but incompatible protocols for the
|
||||
BSL. The protocol must be specified with the ```-P``` flag. Here's
|
||||
the general mapping between protocols and MCU series:
|
||||
|
||||
* ```stc89``` STC 89/90 series
|
||||
* ```stc12a``` STC12Cx052AD and possibly others
|
||||
* ```stc12``` Most STC10/11/12 series
|
||||
* ```stc15a``` STC15x104E and STC15x204E(A) series
|
||||
* ```stc15``` Most STC15 series
|
||||
|
||||
The text files in the doc/ subdirectory provide an overview over
|
||||
the reverse engineered protocols used by the BSLs. For more details,
|
||||
please read the source code.
|
||||
|
||||
### Getting MCU information
|
||||
|
||||
Call stcgal without any file to program. It will dump information
|
||||
about the MCU, e.g.:
|
||||
|
||||
```
|
||||
$ ./stcgal.py -P stc15
|
||||
Waiting for MCU, please cycle power: done
|
||||
Target model:
|
||||
Name: IAP15F2K61S2
|
||||
Magic: F449
|
||||
Code flash: 61.0 KB
|
||||
EEPROM flash: 0.0 KB
|
||||
Target frequency: 10.046 MHz
|
||||
Target BSL version: 7.1S
|
||||
Target wakeup frequency: 34.771 KHz
|
||||
Target options:
|
||||
reset_pin_enabled=False
|
||||
clock_source=internal
|
||||
clock_gain=high
|
||||
watchdog_por_enabled=False
|
||||
watchdog_stop_idle=True
|
||||
watchdog_prescale=256
|
||||
low_voltage_reset=True
|
||||
low_voltage_threshold=3
|
||||
eeprom_lvd_inhibit=True
|
||||
eeprom_erase_enabled=False
|
||||
bsl_pindetect_enabled=False
|
||||
por_reset_delay=long
|
||||
rstout_por_state=high
|
||||
uart2_passthrough=False
|
||||
uart2_pin_mode=normal
|
||||
Disconnected!
|
||||
```
|
||||
|
||||
### Program the flash memory
|
||||
|
||||
stcgal supports Intel HEX encoded files as well as binary files. Intel
|
||||
HEX is autodetected by file extension (.hex, .ihx or .ihex).
|
||||
|
||||
Call stcgal just like before, but provide the path to the code image:
|
||||
|
||||
```
|
||||
$ ./stcgal.py -P stc15 hello.hex
|
||||
Waiting for MCU, please cycle power: done
|
||||
Target model:
|
||||
Name: IAP15F2K61S2
|
||||
Magic: F449
|
||||
Code flash: 61.0 KB
|
||||
EEPROM flash: 0.0 KB
|
||||
Target frequency: 10.046 MHz
|
||||
Target BSL version: 7.1S
|
||||
Target wakeup frequency: 34.771 KHz
|
||||
Target options:
|
||||
reset_pin_enabled=False
|
||||
clock_source=internal
|
||||
clock_gain=high
|
||||
watchdog_por_enabled=False
|
||||
watchdog_stop_idle=True
|
||||
watchdog_prescale=256
|
||||
low_voltage_reset=True
|
||||
low_voltage_threshold=3
|
||||
eeprom_lvd_inhibit=True
|
||||
eeprom_erase_enabled=False
|
||||
bsl_pindetect_enabled=False
|
||||
por_reset_delay=long
|
||||
rstout_por_state=high
|
||||
uart2_passthrough=False
|
||||
uart2_pin_mode=normal
|
||||
Loading flash: 80 bytes (Intel HEX)
|
||||
Trimming frequency: 10.046 MHz
|
||||
Switching to 19200 baud: done
|
||||
Erasing flash: done
|
||||
Writing 256 bytes: .... done
|
||||
Setting options: done
|
||||
Target UID: 0D000021022632
|
||||
Disconnected!
|
||||
```
|
||||
|
||||
You can also program the EEPROM part of the memory, if applicable. Add
|
||||
the EEPROM image path to the commandline after the flash image path.
|
||||
|
||||
stcgal uses a conservative baud rate of 19200 bps by
|
||||
default. Programming can be sped up by choosing a faster baud rate
|
||||
with the flag ```-b```.
|
||||
|
||||
### Device options
|
||||
|
||||
stcgal dumps a number of target options. These can be modified as
|
||||
well. Provide one (or more) ```-o``` flags followed by a key-value
|
||||
pair on the commandline to adjust these settings. For instance, you can
|
||||
enable the external crystal as clock source:
|
||||
|
||||
```
|
||||
$ ./stcgal.py -P stc15 -o clock_source=external hello.bin
|
||||
```
|
||||
|
||||
Please note that device options can only be set when flash memory is
|
||||
programmed!
|
||||
|
||||
#### Option keys
|
||||
|
||||
Not all parts support all options. The protocols or parts that support each option are listed in the description.
|
||||
|
||||
Option key | Possible values | Protocols/Models | Description
|
||||
------------------------------|-------------------|---------------------|------------
|
||||
```cpu_6t_enabled``` | true/false | STC89 only | 6T fast mode
|
||||
```bsl_pindetect_enabled``` | true/false | All | BSL only enabled when P3.2/P3.3 or P1.0/P1.1 (depends on model) are low
|
||||
```eeprom_erase_enabled``` | true/false | All | Erase EEPROM with next programming cycle
|
||||
```clock_gain``` | low/high | All with XTAL pins | Clock gain for external crystal
|
||||
```ale_enabled``` | true/false | STC89 only | ALE pin enabled if true, normal GPIO if false
|
||||
```xram_enabled``` | true/false | STC89 only | Use internal XRAM (STC89 only)
|
||||
```watchdog_por_enabled``` | true/false | All | Watchdog state after power-on reset (POR)
|
||||
```low_voltage_reset ``` | true/false | STC12A+ | Low-voltage reset (brownout)
|
||||
```clock_source``` | internal/external | STC12A+ with XTAL | Use internal (RC) or external (crystal) clock
|
||||
```watchdog_stop_idle``` | true/false | STC12A+ | Stop watchdog in IDLE mode
|
||||
```watchdog_prescale``` | 2,4,8,...,256 | STC12A+ | Watchdog timer prescaler, must be a power of two.
|
||||
```reset_pin_enabled``` | true/false | STC12+ | RESET pin enabled if true, normal GPIO if false
|
||||
```oscillator_stable_delay``` | 4096,...,32768 | STC11F series only | Crystal stabilization delay in clocks. Must be a power of two.
|
||||
```por_reset_delay``` | short/long | STC12+ | Power-on reset (POR) delay
|
||||
```low_voltage_threshold``` | 0...7 | STC15A+ | Low-voltage detection threshold. Model specific.
|
||||
```eeprom_lvd_inhibit``` | true/false | STC15A+ | Ignore EEPROM writes in low-voltage situations
|
||||
```rstout_por_state``` | low/high | STC15+ | RSTOUT pin state after power-on reset
|
||||
```uart2_passthrough``` | true/false | STC15+ | Pass-through UART1 to UART2 pins (for single-wire UART mode)
|
||||
```uart2_pin_mode``` | push-pull/normal | STC15+ | Output mode of UART2 TX pin
|
||||
|
||||
### Frequency trimming
|
||||
|
||||
If the internal RC oscillator is used (```clock_source=internal```),
|
||||
stcgal can execute a trim procedure to adjust it to a given value. This
|
||||
is only supported by STC15 series. The trim values are stored with
|
||||
device options. Use the ```-t``` flag to request trimming to a certain
|
||||
value. Generally, frequencies between 4 and 35 MHz can be achieved. If
|
||||
trimming fails, stcgal will abort.
|
||||
|
||||
License
|
||||
-------
|
||||
|
||||
10
TODO.md
Normal file
10
TODO.md
Normal file
@ -0,0 +1,10 @@
|
||||
TODO
|
||||
====
|
||||
|
||||
- some more documentation / comments
|
||||
- private member naming, other style issues
|
||||
- sensible default serial port (e.g. on windows)
|
||||
- automatic protocol detection
|
||||
- verify stc12a/stc12 options (e.g. low_voltage_threshold)
|
||||
- also verify low_voltage_threshold on stc15
|
||||
- check if stc15 handles 64 byte blocks correctly
|
||||
25
debian/changelog
vendored
25
debian/changelog
vendored
@ -1,28 +1,3 @@
|
||||
stcgal (1.6) unstable; urgency=low
|
||||
|
||||
* Update to 1.6
|
||||
|
||||
-- Grigori Goronzy <greg@chown.ath.cx> Mon, 24 Sep 2018 22:56:31 +0200
|
||||
|
||||
stcgal (1.4) unstable; urgency=low
|
||||
|
||||
* Update to 1.4
|
||||
|
||||
-- Grigori <greg@chown.ath.cx> Tue, 19 Sep 2017 17:57:11 +0200
|
||||
|
||||
stcgal (1.3) unstable; urgency=low
|
||||
|
||||
* Update to 1.3
|
||||
|
||||
-- Grigori Goronzy <greg@chown.ath.cx> Sat, 10 Jun 2017 10:01:07 +0200
|
||||
|
||||
stcgal (1.2) unstable; urgency=low
|
||||
|
||||
* Update to 1.2
|
||||
* Add optional python3-usb dependency
|
||||
|
||||
-- Grigori Goronzy <greg@chown.ath.cx> Fri, 20 May 2016 03:21:25 +0200
|
||||
|
||||
stcgal (1.0git) unstable; urgency=low
|
||||
|
||||
* Initial Debianized Release
|
||||
|
||||
22
debian/control
vendored
22
debian/control
vendored
@ -2,25 +2,25 @@ Source: stcgal
|
||||
Section: electronics
|
||||
Priority: optional
|
||||
Maintainer: Andrew Andrianov <andrew@ncrmnt.org>
|
||||
Build-Depends: debhelper (>= 9), python3, python3-setuptools, dh-python, python3-serial, python3-tqdm, python3-yaml
|
||||
Build-Depends: debhelper (>= 9), python3, python3-setuptools, dh-python
|
||||
Standards-Version: 3.9.5
|
||||
Homepage: https://github.com/grigorig/stcgal
|
||||
X-Python3-Version: >= 3.2
|
||||
|
||||
Package: stcgal
|
||||
Architecture: all
|
||||
Depends: ${misc:Depends}, python3, python3-serial, python3-tqdm
|
||||
Recommends: python3-usb (>= 1.0.0~b2)
|
||||
Depends: ${misc:Depends}, python3, python3-serial
|
||||
Description: STC MCU ISP flash tool
|
||||
stcgal is a command line flash programming tool for STC MCU Ltd.
|
||||
8051 compatible microcontrollers. The name was inspired by avrdude.
|
||||
stcgal is a command line flash programming tool for STC MCU Ltd. 8051
|
||||
compatible microcontrollers. The name was inspired by avrdude.
|
||||
.
|
||||
STC microcontrollers have an UART/USB based boot strap loader (BSL). It
|
||||
utilizes a packet-based protocol to flash the code memory and IAP
|
||||
memory over a serial link. This is referred to as in-system programming
|
||||
(ISP). The BSL is also used to configure various (fuse-like) device
|
||||
options. Unfortunately, this protocol is not publicly documented and
|
||||
STC only provide a (crude) Windows GUI application for programming.
|
||||
STC microcontrollers have a UART based boot strap loader (BSL). It
|
||||
utilizes a packet-based protocol to flash the code memory and
|
||||
IAP memory over a serial link. This is referred to as in-system
|
||||
programming (ISP). The BSL is also used to configure various
|
||||
(fuse-like) device options. Unfortunately, this protocol is not
|
||||
publicly documented and STC only provide a (crude) Windows GUI
|
||||
application for programming.
|
||||
.
|
||||
stcgal is a full-featured Open Source replacement for STC's Windows
|
||||
software; it supports a wide range of MCUs, it is very portable and
|
||||
|
||||
4
debian/docs
vendored
4
debian/docs
vendored
@ -1,4 +1,2 @@
|
||||
README.md
|
||||
doc/USAGE.md
|
||||
doc/MODELS.md
|
||||
doc/FAQ.md
|
||||
TODO.md
|
||||
|
||||
68
doc/FAQ.md
68
doc/FAQ.md
@ -1,68 +0,0 @@
|
||||
Frequently Asked Questions
|
||||
==========================
|
||||
|
||||
### Is it possible to read code (or EEPROM) memory out of a chip?
|
||||
|
||||
By design, this is not possible with STC's bootloader protocols. This is considered a security feature by STC. There is no known workaround at this time. See issue #7 for more details and discussion.
|
||||
|
||||
### Which serial interfaces have been tested with stcgal?
|
||||
|
||||
stcgal should work fine with common 16550 compatible UARTs that are traditionally available on many platforms. However, nowadays, USB-based UARTs are the typical case. The following USB-based UART interface chips have been successfully tested with stcgal:
|
||||
|
||||
* FT232 family (OS: Linux, Windows)
|
||||
* CH340/CH341 (OS: Windows, Linux requires Kernel 4.10)
|
||||
* PL2303 (OS: Windows, Linux)
|
||||
* CP2102 (OS: Windows, Linux, macOS)
|
||||
|
||||
Interfaces that are known to not work:
|
||||
|
||||
* Raspberry Pi Mini UART (lacks parity support, enable the PL011 UART instead)
|
||||
|
||||
In general, stcgal requires accurate baud rate timings and parity support.
|
||||
|
||||
### stcgal fails to recognize the MCU and is stuck at "Waiting for MCU"
|
||||
|
||||
There are a number of issues that can result in this symptom:
|
||||
|
||||
* Electrical issues and wrong connections. Make sure that RX/TX, GND and VCC are connected correctly. If you do not use the autoreset feature, also make sure to connect power only after stcgal starts, as the bootloader is only invoked on power-on reset.
|
||||
* Parasitic powering through I/O pins. The MCU can be powered through I/O pins (such as RX/TX) even if VCC is not connected. In this case, the power-on reset logic does not work. See next question.
|
||||
* Serial interface incompatibilities. Some USB-based UARTs have bad compatibility with STC MCUs for various reasons. You can try to lower the handshake baudrate from the standard 2400 baud to 1200 baud with the option `-l 1200`, which works around these issues in some cases.
|
||||
|
||||
### How can I avoid parasitic powering?
|
||||
|
||||
Various remedies are possible to avoid parasitic powering.
|
||||
|
||||
* You can try to connect a resistor (< 1k) between MCU VCC and GND to short-circuit injected power and hopefully drop the voltage below the brown-out value.
|
||||
* Another option is to insert series resistor on I/O lines that might inject power. Try a value like 1k on the RX/TX lines, for instance.
|
||||
* Yet another possibility is to switch GND instead of VCC. This should be a fairly reliable solution in most cases.
|
||||
|
||||
### RC frequency trimming fails
|
||||
|
||||
First, make sure that the frequency specified uses the correct unit. The frequency is specified in kHz and the safe range is approximately 5000 kHz - 30000 kHz. Furthermore, frequency trimming uses the UART clock as the clock reference, so UART incompatibilities or clock inaccuracies can also result in issues with frequency trimming. If possible, try another UART chip.
|
||||
|
||||
### Baud rate switching fails or flash programming fails
|
||||
|
||||
This can especially happen at high programming baud rates, e.g. 115200 baud. Try a lower baudrate, or stick to the default of 19200 baud. Some USB UARTs are known to cause problems due to inaccurate timing as well, which can lead to various issues.
|
||||
|
||||
### How can I use the autoreset feature?
|
||||
|
||||
The standard autoreset feature works somewhat similarly to Arduino. DTR is an active low signal, and is asserted on startup of stcgal for 500 ms and then deasserted for the rest of the programming sequence. On a standard USB UART, this results in 500 ms low pulse, followed by a high phase. The stcgal author recommends the following circuit:
|
||||
|
||||
```
|
||||
VCC --o o-- MCU GND
|
||||
| |
|
||||
.-. |
|
||||
| | 1k |
|
||||
| | |
|
||||
'_' |
|
||||
| |
|
||||
| ||-+
|
||||
DTR --o --||<- BS170/BSS138
|
||||
||-| (N-CH MOSFET)
|
||||
|
|
||||
|
|
||||
GND ---------o
|
||||
```
|
||||
|
||||
This circuit uses an N-channel MOSFET as a low-side switch to switch the MCU's GND. VCC is directly connected. This avoids parasitic powering issues. The pull-up resistor ensures that the MCU is switched on when the DTR input is floating.
|
||||
|
||||
@ -1,17 +0,0 @@
|
||||
Installation
|
||||
============
|
||||
|
||||
stcgal requires Python 3.2 (or later), pyserial 3.0 or later and
|
||||
TQDM 4.0.0 or later. USB support is optional and requires pyusb
|
||||
1.0.0b2 or later. You can run stcgal directly with the included
|
||||
```stcgal.py``` script if the dependencies are already installed.
|
||||
|
||||
There are several options for permanent installation:
|
||||
|
||||
* Use Python3 and ```pip```. Run ```pip3 install stcgal``` to
|
||||
install the latest release of stcgal globally on your system.
|
||||
This may require administrator/root permissions for write access
|
||||
to system directories.
|
||||
|
||||
* Use setuptools. Run ```./setup.py build``` to build and
|
||||
```sudo ./setup.py install``` to install stcgal.
|
||||
@ -1,32 +0,0 @@
|
||||
Supported MCU models
|
||||
====================
|
||||
|
||||
stcgal should fully support STC 89/90/10/11/12/15/8 series MCUs.
|
||||
|
||||
So far, stcgal was tested with the following MCU models:
|
||||
|
||||
* STC89C52RC (BSL version: 4.3C/6.6C)
|
||||
* STC90C52RC (BSL version: 4.3C)
|
||||
* STC89C54RD+ (BSL version: 4.3C)
|
||||
* STC12C2052 (BSL version: 5.8D)
|
||||
* STC12C2052AD (BSL version: 5.8D)
|
||||
* STC12C5608AD (BSL version: 6.0G)
|
||||
* STC12C5A16S2 (BSL version: 6.2I)
|
||||
* STC12C5A60S2 (BSL version: 6.2I/7.1I)
|
||||
* STC11F02E (BSL version: 6.5K)
|
||||
* STC10F04XE (BSL version: 6.5J)
|
||||
* STC11F08XE (BSL version: 6.5M)
|
||||
* STC12C5204AD (BSL version: 6.6H)
|
||||
* STC15F104E (BSL version: 6.7Q)
|
||||
* STC15F204EA (BSL version: 6.7R)
|
||||
* STC15L104W (BSL version: 7.1.4Q)
|
||||
* STC15F104W (BSL version: 7.1.4Q)
|
||||
* IAP15F2K61S2 (BSL version: 7.1.4S)
|
||||
* STC15L2K16S2 (BSL version: 7.2.4S)
|
||||
* IAP15L2K61S2 (BSL version: 7.2.5S)
|
||||
* STC15W408AS (BSL version: 7.2.4T)
|
||||
* STC15W4K56S4 (BSL version: 7.3.4T, UART and USB mode)
|
||||
* STC8A8K64S4A12 (BSL version: 7.3.9U)
|
||||
* STC8F2K08S2 (BSL version: 7.3.10U)
|
||||
|
||||
Compatibility reports, both negative and positive, are welcome.
|
||||
18
doc/PyPI.md
18
doc/PyPI.md
@ -1,18 +0,0 @@
|
||||
stcgal - STC MCU ISP flash tool
|
||||
===============================
|
||||
|
||||
stcgal is a command line flash programming tool for [STC MCU Ltd](http://stcmcu.com/).
|
||||
8051 compatible microcontrollers.
|
||||
|
||||
STC microcontrollers have an UART/USB based boot strap loader (BSL). It
|
||||
utilizes a packet-based protocol to flash the code memory and IAP
|
||||
memory over a serial link. This is referred to as in-system programming
|
||||
(ISP). The BSL is also used to configure various (fuse-like) device
|
||||
options. Unfortunately, this protocol is not publicly documented and
|
||||
STC only provide a (crude) Windows GUI application for programming.
|
||||
|
||||
stcgal is a full-featured Open Source replacement for STC's Windows
|
||||
software; it supports a wide range of MCUs, it is very portable and
|
||||
suitable for automation.
|
||||
|
||||
[See the GitHub page for more information](https://github.com/grigorig/stcgal).
|
||||
245
doc/USAGE.md
245
doc/USAGE.md
@ -1,245 +0,0 @@
|
||||
Usage
|
||||
=====
|
||||
|
||||
Call stcgal with ```-h``` for usage information.
|
||||
|
||||
```
|
||||
usage: stcgal.py [-h] [-a] [-r RESETCMD]
|
||||
[-P {stc89,stc12a,stc12b,stc12,stc15a,stc15,stc8,usb15,auto}]
|
||||
[-p PORT] [-b BAUD] [-l HANDSHAKE] [-o OPTION] [-t TRIM] [-D]
|
||||
[-V]
|
||||
[code_image] [eeprom_image]
|
||||
|
||||
stcgal 1.5 - an STC MCU ISP flash tool
|
||||
(C) 2014-2018 Grigori Goronzy and others
|
||||
https://github.com/grigorig/stcgal
|
||||
|
||||
positional arguments:
|
||||
code_image code segment file to flash (BIN/HEX)
|
||||
eeprom_image eeprom segment file to flash (BIN/HEX)
|
||||
|
||||
optional arguments:
|
||||
-h, --help show this help message and exit
|
||||
-a, --autoreset cycle power automatically by asserting DTR
|
||||
-r RESETCMD, --resetcmd RESETCMD
|
||||
shell command for board power-cycling (instead of DTR
|
||||
assertion)
|
||||
-P {stc89,stc12a,stc12b,stc12,stc15a,stc15,stc8,usb15,auto}, --protocol {stc89,stc12a,stc12b,stc12,stc15a,stc15,stc8,usb15,auto}
|
||||
protocol version (default: auto)
|
||||
-p PORT, --port PORT serial port device
|
||||
-b BAUD, --baud BAUD transfer baud rate (default: 19200)
|
||||
-l HANDSHAKE, --handshake HANDSHAKE
|
||||
handshake baud rate (default: 2400)
|
||||
-o OPTION, --option OPTION
|
||||
set option (can be used multiple times, see
|
||||
documentation)
|
||||
-t TRIM, --trim TRIM RC oscillator frequency in kHz (STC15+ series only)
|
||||
-D, --debug enable debug output
|
||||
-V, --version print version info and exit
|
||||
```
|
||||
|
||||
Most importantly, ```-p``` sets the serial port to be used for programming.
|
||||
|
||||
### Protocols
|
||||
|
||||
STC MCUs use a variety of related but incompatible protocols for the
|
||||
BSL. The protocol can be specified with the ```-P``` flag. By default
|
||||
UART protocol autodetection is used. The mapping between protocols
|
||||
and MCU series is as follows:
|
||||
|
||||
* ```auto``` Automatic detection of UART based protocols (default)
|
||||
* ```stc89``` STC89/90 series
|
||||
* ```stc12a``` STC12x052 series and possibly others
|
||||
* ```stc12b``` STC12x52 series, STC12x56 series and possibly others
|
||||
* ```stc12``` Most STC10/11/12 series
|
||||
* ```stc15a``` STC15x104E and STC15x204E(A) series
|
||||
* ```stc15``` Most STC15 series
|
||||
* ```stc8``` STC8 series
|
||||
* ```usb15``` USB support on STC15W4 series
|
||||
|
||||
The text files in the doc/reverse-engineering subdirectory provide an
|
||||
overview over the reverse engineered protocols used by the BSLs. For
|
||||
more details, please read the source code.
|
||||
|
||||
### Getting MCU information
|
||||
|
||||
Call stcgal without any file to program. It will dump information
|
||||
about the MCU, e.g.:
|
||||
|
||||
```
|
||||
$ ./stcgal.py -P stc15
|
||||
Waiting for MCU, please cycle power: done
|
||||
Target model:
|
||||
Name: IAP15F2K61S2
|
||||
Magic: F449
|
||||
Code flash: 61.0 KB
|
||||
EEPROM flash: 0.0 KB
|
||||
Target frequency: 10.046 MHz
|
||||
Target BSL version: 7.1S
|
||||
Target wakeup frequency: 34.771 KHz
|
||||
Target options:
|
||||
reset_pin_enabled=False
|
||||
clock_source=internal
|
||||
clock_gain=high
|
||||
watchdog_por_enabled=False
|
||||
watchdog_stop_idle=True
|
||||
watchdog_prescale=256
|
||||
low_voltage_reset=True
|
||||
low_voltage_threshold=3
|
||||
eeprom_lvd_inhibit=True
|
||||
eeprom_erase_enabled=False
|
||||
bsl_pindetect_enabled=False
|
||||
por_reset_delay=long
|
||||
rstout_por_state=high
|
||||
uart2_passthrough=False
|
||||
uart2_pin_mode=normal
|
||||
Disconnected!
|
||||
```
|
||||
|
||||
If the identification fails, see the [FAQ](FAQ.md) for troubleshooting.
|
||||
|
||||
### Program the flash memory
|
||||
|
||||
stcgal supports Intel HEX encoded files as well as binary files. Intel
|
||||
HEX is autodetected by file extension (.hex, .ihx or .ihex).
|
||||
|
||||
Call stcgal just like before, but provide the path to the code image:
|
||||
|
||||
```
|
||||
$ ./stcgal.py -P stc15 hello.hex
|
||||
Waiting for MCU, please cycle power: done
|
||||
Target model:
|
||||
Name: IAP15F2K61S2
|
||||
Magic: F449
|
||||
Code flash: 61.0 KB
|
||||
EEPROM flash: 0.0 KB
|
||||
Target frequency: 10.046 MHz
|
||||
Target BSL version: 7.1S
|
||||
Target wakeup frequency: 34.771 KHz
|
||||
Target options:
|
||||
reset_pin_enabled=False
|
||||
clock_source=internal
|
||||
clock_gain=high
|
||||
watchdog_por_enabled=False
|
||||
watchdog_stop_idle=True
|
||||
watchdog_prescale=256
|
||||
low_voltage_reset=True
|
||||
low_voltage_threshold=3
|
||||
eeprom_lvd_inhibit=True
|
||||
eeprom_erase_enabled=False
|
||||
bsl_pindetect_enabled=False
|
||||
por_reset_delay=long
|
||||
rstout_por_state=high
|
||||
uart2_passthrough=False
|
||||
uart2_pin_mode=normal
|
||||
Loading flash: 80 bytes (Intel HEX)
|
||||
Trimming frequency: 10.046 MHz
|
||||
Switching to 19200 baud: done
|
||||
Erasing flash: done
|
||||
Writing 256 bytes: .... done
|
||||
Setting options: done
|
||||
Target UID: 0D000021022632
|
||||
Disconnected!
|
||||
```
|
||||
|
||||
You can also program the EEPROM part of the memory, if applicable. Add
|
||||
the EEPROM image path to the commandline after the flash image path.
|
||||
|
||||
stcgal uses a conservative baud rate of 19200 bps by
|
||||
default. Programming can be sped up by choosing a faster baud rate
|
||||
with the flag ```-b```.
|
||||
|
||||
### Device options
|
||||
|
||||
stcgal dumps a number of target options. These can be modified as
|
||||
well. Provide one (or more) ```-o``` flags followed by a key-value
|
||||
pair on the commandline to adjust these settings. For instance, you can
|
||||
enable the external crystal as clock source:
|
||||
|
||||
```
|
||||
$ ./stcgal.py -P stc15 -o clock_source=external hello.bin
|
||||
```
|
||||
|
||||
Please note that device options can only be set when flash memory is
|
||||
programmed!
|
||||
|
||||
#### Option keys
|
||||
|
||||
Not all parts support all options. The protocols or parts that support each option are listed in the description.
|
||||
|
||||
Option key | Possible values | Protocols/Models | Description
|
||||
------------------------------|-------------------|---------------------|------------
|
||||
```cpu_6t_enabled``` | true/false | STC89 only | 6T fast mode
|
||||
```bsl_pindetect_enabled``` | true/false | All | BSL only enabled when P3.2/P3.3 or P1.0/P1.1 (depends on model) are low
|
||||
```eeprom_erase_enabled``` | true/false | All | Erase EEPROM with next programming cycle
|
||||
```clock_gain``` | low/high | All with XTAL pins | Clock gain for external crystal
|
||||
```ale_enabled``` | true/false | STC89 only | ALE pin enabled if true, normal GPIO if false
|
||||
```xram_enabled``` | true/false | STC89 only | Use internal XRAM (STC89 only)
|
||||
```watchdog_por_enabled``` | true/false | All | Watchdog state after power-on reset (POR)
|
||||
```low_voltage_reset``` | low/high | STC12A/STC12 | Low-voltage reset level (low: ~3.3V, high: ~3.7V)
|
||||
```low_voltage_reset``` | true/false | STC12 | Enable RESET2 pin low voltage detect
|
||||
```low_voltage_reset``` | true/false | STC15A | Enable low-voltage reset (brownout)
|
||||
```clock_source``` | internal/external | STC12A+ with XTAL | Use internal (RC) or external (crystal) clock
|
||||
```watchdog_stop_idle``` | true/false | STC12A+ | Stop watchdog in IDLE mode
|
||||
```watchdog_prescale``` | 2,4,8,...,256 | STC12A+ | Watchdog timer prescaler, must be a power of two.
|
||||
```reset_pin_enabled``` | true/false | STC12+ | RESET pin enabled if true, normal GPIO if false
|
||||
```oscillator_stable_delay``` | 4096,...,32768 | STC11F series only | Crystal stabilization delay in clocks. Must be a power of two.
|
||||
```por_reset_delay``` | short/long | STC12+ | Power-on reset (POR) delay
|
||||
```low_voltage_threshold``` | 0...7 | STC15A+ | Low-voltage detection threshold. Model specific.
|
||||
```eeprom_lvd_inhibit``` | true/false | STC15A+ | Ignore EEPROM writes in low-voltage situations
|
||||
```rstout_por_state``` | low/high | STC15+ | RSTOUT/RSTSV pin state after power-on reset
|
||||
```uart1_remap``` | true/false | STC8 | Remap UART1 pins (P3.0/P3.1) to UART2 pins (P3.6/P3.7)
|
||||
```uart2_passthrough``` | true/false | STC15+ | Pass-through UART1 to UART2 pins (for single-wire UART mode)
|
||||
```uart2_pin_mode``` | push-pull/normal | STC15+ | Output mode of UART2 TX pin
|
||||
```cpu_core_voltage``` | low/mid/high | STC15W+ | CPU core voltage (low: ~2.7V, mid: ~3.3V, high: ~3.6V)
|
||||
```epwm_open_drain``` | true/false | STC8 | Use open-drain pin mode for EPWM pins after power-on reset
|
||||
```program_eeprom_split``` | 512 - 65024 | STC8A8 w/ 64 KB | Select split between code flash and EEPROM flash (in 512 byte blocks)
|
||||
|
||||
### Frequency trimming
|
||||
|
||||
If the internal RC oscillator is used (```clock_source=internal```),
|
||||
stcgal can execute a trim procedure to adjust it to a given value. This
|
||||
is only supported by STC15 series and newer. The trim values are stored
|
||||
with device options. Use the ```-t``` flag to request trimming to a certain
|
||||
value. Generally, frequencies between 4000 and 30000 kHz can be achieved.
|
||||
If trimming fails, stcgal will abort.
|
||||
|
||||
### Automatic power-cycling
|
||||
|
||||
STC's microcontrollers require a power-on reset to invoke the bootloader,
|
||||
which can be inconvenient. stcgal can use the DTR control signal of a
|
||||
serial interface to automate this. The DTR signal is asserted for
|
||||
approximately 500 ms when the autoreset feature is enabled with the
|
||||
```-a``` flag. This requires external circuitry to actually switch the
|
||||
power. In some cases, when the microcontroller draws only little power,
|
||||
it is possible to directly supply power from the DTR signal.
|
||||
|
||||
As an alternative to DTR, you can use a custom shell command or an external
|
||||
script (via -r option) to reset the device. You should specify the command
|
||||
along with -a option. Do not forget the quotes!
|
||||
|
||||
Example:
|
||||
|
||||
```
|
||||
$ ./stcgal.py -P stc15 -a -r "echo 1 > /sys/class/gpio/gpio666/value"
|
||||
```
|
||||
or
|
||||
|
||||
```
|
||||
$ ./stcgal.py -P stc15 -a -r "./powercycle.sh"
|
||||
```
|
||||
|
||||
### Exit status
|
||||
|
||||
The exit status is 0 if no error occured while executing stcgal. Any
|
||||
error, such as a protocol error or I/O error, results in an exit
|
||||
status of 1. If the the user aborted stcgal by pressing CTRL-C,
|
||||
that results in an exit status of 2.
|
||||
|
||||
### USB support
|
||||
|
||||
STC15W4 series have an USB-based BSL that can be optionally
|
||||
used. USB support in stcgal is experimental and might change in the
|
||||
future. USB mode is enabled by using the ```usb15``` protocol. The
|
||||
port (```-p```) flag as well as the baudrate options are ignored for
|
||||
the USB protocol. RC frequency trimming is not supported.
|
||||
@ -1,13 +1,13 @@
|
||||
#!/usr/bin/env python3
|
||||
# This curious script dumps all model info from STC-ISP.
|
||||
# Data is directly read from the binary.
|
||||
# Offsets are for stc-isp-15xx-v6.86O.exe, sha1sum f70e317d758ef8c942613a8b0540147d7170589b
|
||||
# Offsets are for STC-ISP 6.85I, sha1sum a1a625d6c491fe98d0286ebac0a8d78b94dca81d
|
||||
|
||||
MCU_TABLE_OFFSET = 0x0006ac80
|
||||
MCU_TABLE_SIZE = 984
|
||||
MCU_TABLE_OFFSET = 0x00063550
|
||||
MCU_TABLE_SIZE = 914
|
||||
MCU_RECORD_SIZE = 32
|
||||
MCU_NAMES_OFFSET = 0x00087810
|
||||
MCU_NAMES_PTR_OFFSET = 0x00487810
|
||||
MCU_NAMES_OFFSET = 0x0007d708
|
||||
MCU_NAMES_PTR_OFFSET = 0x0047d708
|
||||
|
||||
import struct
|
||||
import sys
|
||||
@ -25,12 +25,12 @@ for i in range(MCU_TABLE_SIZE):
|
||||
inp.seek(mcu_name_offset)
|
||||
name_str = inp.read(16).split(b'\00')[0].decode("ascii")
|
||||
|
||||
# TODO: With some MCUs, the amount of available EEPROM depends on the BSL version.
|
||||
# Generally, newer BSLs free up a KB of additional EEPROM. Currently, always the
|
||||
# maximum amount (with newer BSL) is reported.
|
||||
# XXX: 1 KB are reserved one *some* MCUs for some reason
|
||||
#if ee_size > 0 and not name_str.startswith("IAP"):
|
||||
# ee_size -= 1024
|
||||
|
||||
# STC12x54xx always have 12 KB eeprom
|
||||
if name_str.startswith("STC12C54") or name_str.startswith("STC12LE54"):
|
||||
# STC12C54xx always have 12 KB eeprom
|
||||
if name_str.startswith("STC12C54"):
|
||||
ee_size = 12 * 1024
|
||||
|
||||
print("MCUModel(name='%s', magic=0x%02x%02x, total=%d, code=%d, eeprom=%d)," %
|
||||
@ -1,141 +0,0 @@
|
||||
STC15 series MCS bytes
|
||||
======================
|
||||
|
||||
MCS3 is like early STC15 MCS1.
|
||||
MCS2 is like early STC15 MCS2.
|
||||
MCS4 is like early STC15 MCS0 but with additions.
|
||||
MCSX is like early STC15 MCS12.
|
||||
MCSY is new in STC15W4 series
|
||||
|
||||
baseline
|
||||
B5 FF F7 BB 9F
|
||||
|
||||
long por disabled
|
||||
B6 FF F7 BB 1F
|
||||
--> MCS4 bit 7 controls POR delay. low => short, high => long
|
||||
|
||||
reset pin as io disabled
|
||||
B8 FF F7 BB 8F
|
||||
--> MCS4 bit 4 controls reset pin. low => reset is normal, high => reset is io
|
||||
|
||||
low voltage reset disabled
|
||||
B6 FF F7 FB 9F
|
||||
--> MCS3 bit 6 controls low voltage reset. low => lv reset enabled, high => disabled
|
||||
|
||||
lvd threshold 2.61v
|
||||
B8 FF F7 BA 9F
|
||||
lvd threshold 2.82v
|
||||
B5 FF F7 B9 9F
|
||||
lvd threshold 3.08v
|
||||
B6 FF F7 B8 9F
|
||||
|
||||
--> MCS3 bits 0-2 control LVD threshold setting. exact mapping not yet clear.
|
||||
|
||||
eeprom lv inhibit disabled
|
||||
B7 FF F7 3B 9F
|
||||
--> MCS3 bit 7 controls eeprom lv inhibit. high => eeprom lv inhibit enabled, low => disabled
|
||||
|
||||
watchdog after reset enabled
|
||||
B6 FF D7 BB 9F
|
||||
--> MCS2 bit 5 controls watchdog after reset. high => disabled, low => enabled
|
||||
|
||||
watchdog prescaler 128
|
||||
B4 FF F6 BB 9F
|
||||
watchdog prescaler 64
|
||||
B5 FF F5 BB 9F
|
||||
watchdog prescaler 32
|
||||
B5 FF F4 BB 9F
|
||||
watchdog prescaler 2
|
||||
B6 FF F0 BB 9F
|
||||
--> MCS2 bits 0-2 control watchdog prescaler. mapping is similar to early STC15.
|
||||
|
||||
wdt stop in idle disabled
|
||||
B7 FF FF BB 9F
|
||||
|
||||
erase eeprom next programming
|
||||
B4 FF F7 BB 9F
|
||||
--> it's somewhere else! it's bit 1 of the extra MCSX byte that is typically 0xfd. low => erase eeprom disabled, high => erase eeprom enabled
|
||||
|
||||
|
||||
p3.3 por state enabled
|
||||
B9 FF F7 BB 97
|
||||
--> MCS4 bit 3 controls the p3.3 state. high => p3.3 high, low => p3.3 low
|
||||
|
||||
p3.1 passthrough from p3.0 enabled
|
||||
B5 FF F7 BB DF
|
||||
--> MCS4 bit 2 controls the p3.1 passthrough. low => passthrough disabled, high => passthrough enabled
|
||||
|
||||
p3.1 push pull enabled
|
||||
B5 FF F7 BB BF
|
||||
--> MCS4 bit 1 controls p3.1 push pull. low => quasi-bidi, high => push-pull
|
||||
|
||||
bsl pindetect enabled
|
||||
B5 FF F7 BB BF
|
||||
--> somewhere else, MCSX bit 0. low => pindetect enabled, high => pindetect disabled.
|
||||
|
||||
|
||||
external oscillator enabled (IAP15F2K61S2)
|
||||
9C 7F F7 BB 9E
|
||||
--> MCS4 bit 0 controls external oscillator. low => use external crystal, high => use RC.
|
||||
|
||||
external oscillator enabled + clock gain low (IAP15F2K61S2)
|
||||
9C 7F F7 BB 9C
|
||||
--> MCS 4 bit controls clock gain. high => high clock gain, low => low clock gain.
|
||||
|
||||
|
||||
cpu core supply level (MCSY)
|
||||
|
||||
in status packet:
|
||||
|
||||
2.68v
|
||||
46 B9 68 00 34 50 8D FF 73 96 F7 BC 9F 00 5B 7A C0 FD 27 ED 00 00 73 54 00 F5 28 04 06 70 96 02 15 19 1C 1E 23 00 EC E0 04 D7 EA 92 FF FF FF 15 09 25 60 14 BD 16
|
||||
|
||||
3.33v
|
||||
46 B9 68 00 34 50 8D FF 73 96 F7 BC 9F 00 5B 92 30 FD 25 EA 00 FC 73 54 00 F5 28 04 06 70 96 02 15 19 1C 1E 23 00 EC E0 04 D7 F7 92 FF FF FF 15 09 25 60 15 49 16
|
||||
|
||||
3.63v
|
||||
46 B9 68 00 34 50 8D FF 73 96 F7 BC 9F 00 5B 7A C0 FD 25 EF 00 00 73 54 00 F5 28 04 06 70 96 02 15 19 1C 1E 23 00 EC E0 04 D7 FD 92 FF FF FF 15 09 25 60 14 D0 16
|
||||
|
||||
3.73v
|
||||
46 B9 68 00 34 50 8D FF 73 96 F7 BC 9F 00 5B 92 30 FD 25 EA 00 00 73 54 00 F5 28 04 06 70 96 02 15 19 1C 1E 23 00 EC E0 04 D7 FF 92 FF FF FF 15 09 25 60 14 55 16
|
||||
^^
|
||||
MCSY
|
||||
|
||||
voltage: ff -> 3.73v
|
||||
fd -> 3.63v
|
||||
f7 -> 3.33v
|
||||
ea -> 2.68v
|
||||
|
||||
in set options packet:
|
||||
|
||||
46 B9 6A 00 4B 04 00 00 5A A5 FF FF FF 00 FF FF
|
||||
00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
00 00 FF A8 FF EE FF E0 FF FD 03 FF FF FF FF FF
|
||||
^^
|
||||
MCSP
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FD FF FF FF 75 BF F7 BC 9F 3A 80 16
|
||||
^^
|
||||
MCSY
|
||||
|
||||
password setting
|
||||
|
||||
the password is sent with packet type 0x07 and checked before erase with packet type 0x05. setting the password uses two fields.
|
||||
index 22 of the option block encodes the password length in bytes (MCSP, see above). bit 3 in MCS3 decides whether the password
|
||||
will be checked. if the bit is set, no password check occurs. if it is reset, a password check occurs.
|
||||
|
||||
quick dump from USB-ISP packets:
|
||||
|
||||
set: foobar
|
||||
0000 ff ff ff 00 ff ff 00 05 ff ff ff ff ff ff ff 07 ................
|
||||
0010 ff ff ff ff ff ff ff 07 ff 06 01 ff 6e ff 36 58 ............n.6X
|
||||
0020 ff 00 ff f5 03 ff ff 0c ff ff ff ff ff ff ff 07 ................
|
||||
0030 ff ff ff ff ff ff ff 07 ff ff ff ff ff ff ec 1a ................
|
||||
0040 ff ff ff 99 7f f7 bc 38 9f 61 .......8.a
|
||||
|
||||
reset:
|
||||
0000 ff ff ff 00 ff ff 00 05 ff ff ff ff ff ff ff 07 ................
|
||||
0010 ff ff ff ff ff ff ff 07 ff 00 01 ff 6e ff 36 5e ............n.6^
|
||||
0020 ff 00 ff fd 03 ff ff 04 ff ff ff ff ff ff ff 07 ................
|
||||
0030 ff ff ff ff ff ff ff 07 ff ff ff ff ff ff ec 1a ................
|
||||
0040 ff ff ff 99 7f f7 bc 38 9f 61 .......8.a
|
||||
@ -1,46 +0,0 @@
|
||||
STC15 series USB ISP protocol
|
||||
=============================
|
||||
|
||||
General principle
|
||||
-----------------
|
||||
|
||||
- host does OUT and IN control transfers for write and read
|
||||
- IN transfer with wLength = 132, wValue = 0, wIndex = 0, bRequest = 0 are used for all reads
|
||||
- OUT transfers with with specific bRequest, wValue, wIndex are used for writes
|
||||
|
||||
|
||||
Packet coding
|
||||
-------------
|
||||
|
||||
- packets from MCU
|
||||
always start with 0x46 0xb9, similar to serial protocols
|
||||
third byte is packet length, followed by data bytes
|
||||
checksum at the end: 8 bit modular sum
|
||||
|
||||
- packets from host
|
||||
no header bytes
|
||||
bRequest sets packet type
|
||||
wValue, wIndex interpretation according to packet type
|
||||
8 bit modular checksum for every 7 bytes, interleaved
|
||||
|
||||
- packet types derived from the serial protocol
|
||||
|
||||
Specific packet information
|
||||
---------------------------
|
||||
|
||||
- flash data
|
||||
wIndex specifies write address
|
||||
wValue is 0xa55a
|
||||
bRequest is 0x22 for first packet, 0x02 for the following ones
|
||||
unusually encoded: a total of 128 bytes per packet,
|
||||
with every 7 byte checksummed in some way,
|
||||
for a total of 18x7 byte segments and a final 2 byte segment
|
||||
checksum: 8 bit modular sum
|
||||
|
||||
- option packet
|
||||
generally same as with serial protocol, some header stuff omitted
|
||||
wIndex is 0
|
||||
wValue is 0xa55a
|
||||
bRequest is 4
|
||||
seems to use the same checksumming scheme as flash writes
|
||||
|
||||
@ -1,128 +0,0 @@
|
||||
2015-12-10 23:47:44.198341: PC
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
|
||||
2015-12-10 23:47:48.400692: MCU
|
||||
46 B9 68
|
||||
2015-12-10 23:47:48.411946: PC
|
||||
7F
|
||||
2015-12-10 23:47:48.414811: MCU
|
||||
00 34 50
|
||||
2015-12-10 23:47:48.427644: PC
|
||||
7F
|
||||
2015-12-10 23:47:48.428894: MCU
|
||||
8D FF 73 96 F5 7B 9F FF FF FF FF FF 27 ED 00 00
|
||||
73 54 00 F5 28 04 06 70 96 02 15 19 1C 1E 23 00
|
||||
EC E0 04 D7 F8 73 BF FF FF 15 09 25 60 16 92 16
|
||||
2015-12-10 23:47:48.725370: PC
|
||||
46 B9 6A 00 20 00 0B 00 C0 80 C0 FF C0 00 80 80
|
||||
80 FF 80 00 40 80 40 FF 40 00 00 80 00 00 00 0A
|
||||
12 16 FE FE FE FE FE FE FE FE FE FE FE FE FE
|
||||
2015-12-10 23:47:49.088353: MCU
|
||||
46 B9 68
|
||||
2015-12-10 23:47:49.099586: PC
|
||||
FE
|
||||
2015-12-10 23:47:49.102589: MCU
|
||||
00 20 00
|
||||
2015-12-10 23:47:49.115089: PC
|
||||
FE
|
||||
2015-12-10 23:47:49.116479: MCU
|
||||
0B 0D 21 12 BC 18 3E 1A 05 24 FA 2F B3 34 D1 4A
|
||||
52 5E C0 52 DB 73 1A 00 00 08 7D 16
|
||||
2015-12-10 23:47:49.266317: PC
|
||||
46 B9 6A 00 20 00 0C 71 80 72 80 73 80 74 80 75
|
||||
80 76 80 6F 40 70 40 71 40 72 40 73 40 74 40 0A
|
||||
74 16 FE FE FE FE FE FE FE FE FE FE FE FE FE FE
|
||||
2015-12-10 23:47:49.650397: MCU
|
||||
46 B9 68
|
||||
2015-12-10 23:47:49.661888: PC
|
||||
FE
|
||||
2015-12-10 23:47:49.664523: MCU
|
||||
00 20 00
|
||||
2015-12-10 23:47:49.677636: PC
|
||||
FE
|
||||
2015-12-10 23:47:49.678633: MCU
|
||||
0C 23 BF 23 D3 23 E7 23 F6 24 0F 24 23 47 73 47
|
||||
B9 47 E1 48 09 48 36 48 59 09 5B 16
|
||||
2015-12-10 23:47:49.944529: PC
|
||||
46 B9 6A 00 0E 01 72 40 F6 FF 80 73 81 04 94 16
|
||||
2015-12-10 23:47:50.045100: MCU
|
||||
46 B9 68 00 07 01 00 70 16
|
||||
2015-12-10 23:47:50.116096: PC
|
||||
46 B9 6A 00 0B 05 00 00 5A A5 01 79 16
|
||||
2015-12-10 23:47:50.190036: MCU
|
||||
46 B9 68 00 07 05 00 74 16
|
||||
2015-12-10 23:47:50.255407: PC
|
||||
46 B9 6A 00 0B 03 00 00 5A A5 01 77 16
|
||||
2015-12-10 23:47:53.130695: MCU
|
||||
46 B9 68 00 0E 03 F5 28 00 A5 03 27 49 02 AE 16
|
||||
2015-12-10 23:47:53.210814: PC
|
||||
46 B9 6A 00 8B 22 00 00 5A A5 01 04 01 36 75 81
|
||||
07 12 00 6A E5 82 60 03 02 00 02 E4 78 FF F6 D8
|
||||
FD 01 02 AF 82 8F 06 1F EE 60 0F 7D 90 7E 01 1D
|
||||
BD FF 01 1E ED 4E 70 F7 80 EB 22 AF 82 DF FE 22
|
||||
E5 B0 F4 F5 B0 75 82 05 11 31 75 82 D0 11 19 E5
|
||||
B0 F4 F5 B0 75 82 64 11 19 E5 B0 F4 F5 B0 75 82
|
||||
64 11 19 E5 B0 F4 F5 B0 75 82 64 11 19 E5 B0 F4
|
||||
F5 B0 80 D6 75 82 00 22 FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF 49 E8 16
|
||||
2015-12-10 23:47:54.003906: MCU
|
||||
46 B9 68 00 08 02 54 00 C6 16
|
||||
2015-12-10 23:47:54.068777: PC
|
||||
46 B9 6A 00 8B 02 00 80 5A A5 FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF 81 F6 16
|
||||
2015-12-10 23:47:54.867956: MCU
|
||||
46 B9 68 00 08 02 54 00 C6 16
|
||||
2015-12-10 23:47:54.932281: PC
|
||||
46 B9 6A 00 8B 02 01 00 5A A5 FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF 81 77 16
|
||||
2015-12-10 23:47:55.732519: MCU
|
||||
46 B9 68 00 08 02 54 00 C6 16
|
||||
2015-12-10 23:47:55.796791: PC
|
||||
46 B9 6A 00 8B 02 01 80 5A A5 FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF 81 F7 16
|
||||
2015-12-10 23:47:56.536325: MCU
|
||||
46 B9 68 00 08 02 54 00 C6 16
|
||||
2015-12-10 23:47:56.616743: PC
|
||||
46 B9 6A 00 4B 04 00 00 5A A5 FF FF FF 00 FF FF
|
||||
00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
00 00 FF A8 FF 91 FF 20 FF FD 03 FF FF FF FF FF
|
||||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
||||
FF EC FF FF FF 74 BF F7 BC 9F 39 51 16
|
||||
2015-12-10 23:47:57.070169: MCU
|
||||
46 B9 68 00 08 04 54 00 C8 16
|
||||
@ -1,71 +0,0 @@
|
||||
MCS bytes
|
||||
=========
|
||||
|
||||
46 b9 6a 00 33 04 00 00 5a a5 ff ff ff 00 ff ff
|
||||
00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
|
||||
00 ff 01 31 20 80 34 00 01 ff ff ff ff ff 8b bf
|
||||
^^^^^^^^^^^ ^^ ^^ ^^ ^^
|
||||
frequency clkdiv 5) 1) 3)
|
||||
^^^^^
|
||||
trim?
|
||||
f7 fe 1f cc 16
|
||||
^^ ^^
|
||||
4) 2)
|
||||
|
||||
1) not stricty related to some register
|
||||
aka MCS1
|
||||
bit 0: ? always 1
|
||||
bit 1: oscillator high gain
|
||||
bit 2: EPWM push-pull enabled
|
||||
bit 3: p2.0 state after boot
|
||||
bit 4: TXD signal source from RXD
|
||||
bit 5: p3.7 push-pull enabled
|
||||
bit 6: UART1 remap enabled
|
||||
bit 7: long power-on reset delay
|
||||
|
||||
2) not strictly related to some register
|
||||
aka MCS4
|
||||
eeprom size / code space upper limit (in pages)
|
||||
only seems to apply to devices with max. flash size
|
||||
e.g. fe -> 63.5K, e0 -> 56K
|
||||
|
||||
3) like RSTCFG? inverted?
|
||||
aka MCS2
|
||||
bit 0: LVD0
|
||||
bit 1: LVD1
|
||||
bit 2: ? always 1
|
||||
bit 3: ? always 1
|
||||
bit 4: ~reset pin enabled
|
||||
bit 5: ? always 1
|
||||
bit 6: ~enable lvd reset
|
||||
bit 7: ? always 1
|
||||
|
||||
LVD:
|
||||
2.20V -> 0xbf
|
||||
2.40V -> 0xbe
|
||||
2.70V -> 0xbd
|
||||
3.00V -> 0xbc
|
||||
|
||||
4) like WDT_CONTR
|
||||
aka MCS3
|
||||
bit 0: WDPS0
|
||||
bit 1: WDPS1
|
||||
bit 2: WDPS2
|
||||
bit 3: ~stop wdt in idle
|
||||
bit 4: ? always 1
|
||||
bit 5: ~enable wdt on por
|
||||
bit 6: ? always 1
|
||||
bit 7: ? always 1
|
||||
|
||||
WDPS like in datasheet
|
||||
|
||||
5)
|
||||
aka MCS0
|
||||
bit 0: ? ~BSLD / bootloader enabled
|
||||
bit 1: erase eeprom enabled
|
||||
bit 2: ?
|
||||
bit 3: ?
|
||||
bit 4: ?
|
||||
bit 5: ?
|
||||
bit 6: ?
|
||||
bit 7: ?
|
||||
@ -1,138 +0,0 @@
|
||||
Overview of changes
|
||||
-------------------
|
||||
|
||||
The following changes have been observed compared to STC15:
|
||||
|
||||
- Many differences in the status packet
|
||||
- At least some differences in MCS
|
||||
- Different challenge
|
||||
- no separate program speed
|
||||
- clock division was introduced; calibration always in the ~20-30 MHz range, lower clocks
|
||||
use division
|
||||
- the meaning of the calibration ranges and trim has changed
|
||||
|
||||
The good:
|
||||
|
||||
- Erase, Program, etc. operations are apparently unchanged. :)
|
||||
|
||||
|
||||
Status packet
|
||||
-------------
|
||||
|
||||
46 B9 68 00 30 50 00 54 62 58 5D 00 04 FF FD 8B BF FF 27 4A F7 FE 73 55 00 F6 28 09 85 E3 5F 80 07 20 20 20 01 00 00 FE 05 3A 17 05 25 91 FF 10 AE 16
|
||||
^^^^^ wakeup clock ^^^^^ reference voltage
|
||||
^^^^^^^^ mfg. date
|
||||
|
||||
Clock set to 20 MHz by STC-ISP (encoding is different compared to STC15):
|
||||
|
||||
46 B9 68 00 30 50 01 31 2E 90 38 01 01 FF FD 8B BF FF 27 35 F7 FE 73 55 00 F6 28 09 85 E3 5F 80 07 20 20 20 01 00 00 FE 05 3A 17 05 25 91 FF 10 54 16
|
||||
46 B9 68 00 30 50 01 31 2E 90 38 01 01 FF FD 8B BF FF 27 3B F7 FE 73 55 00 F6 28 09 85 E3 5F 80 07 20 20 20 01 00 00 FE 05 3A 17 05 25 91 FF 10 5A 16
|
||||
^^^^^ some 24 MHz reference or other clk measurement?
|
||||
^^^^^ trim/adjust?
|
||||
^^ clkdiv
|
||||
^^^^^^^^^^^ clk
|
||||
|
||||
MCS bytes
|
||||
|
||||
46 B9 68 00 30 50 01 31 2E 90 38 01 01 FF FD 8B BF FF 27 35 F7 FE 73 55 00 F6 28 09 85 E3 5F 80 07 20 20 20 01 00 00 FE 05 3A 17 05 25 91 FF 10 54 16
|
||||
^^^^^^^^ ^^^^^
|
||||
|
||||
Disconnect
|
||||
----------
|
||||
|
||||
Uses FF command byte.
|
||||
|
||||
|
||||
Basic challenge operation
|
||||
-------------------------
|
||||
|
||||
Host sends a challenge of some kind, followed by 0xfe pulsing
|
||||
|
||||
46 B9 6A 00 0C 00 02 00 00 80 00 00 F8 16
|
||||
|
||||
Much simpler than in STC15
|
||||
|
||||
MCU sends back some response:
|
||||
|
||||
46 B9 68 00 0C 00 02 36 AD 4E 83 02 2A 16
|
||||
|
||||
Host now sends some longer challenge, followed by more pulses:
|
||||
|
||||
46 B9 6A 00 20 00 0C 7C 00 7C 01 7C 02 7C 03 7D 00 7D 01 7D 02 7D 03 7E 00 7E 01 7E 02 7E 03 06 84 16
|
||||
|
||||
MCU sends back some response:
|
||||
|
||||
46 B9 68 00 20 00 0C 4D C6 4D DB 4D E7 4D F3 4D F6 4E 0E 4E 11 4E 26 4E 26 4E 32 4E 41 4E 56 09 DC 16
|
||||
|
||||
Host now seems to initiate a baud switch or something like that
|
||||
|
||||
46 B9 6A 00 0E 01 00 00 FF CC 01 7C 80 03 41 16
|
||||
|
||||
MCU acknowlegdes it:
|
||||
|
||||
46 B9 68 00 07 01 00 70 16
|
||||
|
||||
Now the MCU switches to the new baud rate.
|
||||
|
||||
|
||||
Challenges observed
|
||||
-------------------
|
||||
|
||||
6 MHz:
|
||||
|
||||
46B96A0020000C 1400 1401 1402 1403 1500 1501 1502 1503 1600 1601 1602 1603 01A416
|
||||
|
||||
5.5 MHz:
|
||||
|
||||
46B96A0020000C 5C00 5C01 5C02 5C03 5D00 5D01 5D02 5D03 5E00 5E01 5E02 5E03 050416
|
||||
|
||||
|
||||
11 MHz:
|
||||
|
||||
46B96A0020000C 5B00 5B01 5B02 5B03 5C00 5C01 5C02 5C03 5D00 5D01 5D02 5D03 04F816
|
||||
|
||||
20 MHz:
|
||||
|
||||
46B96A0020000C 3600 3601 3602 3603 3700 3701 3702 3703 3800 3801 3802 3803 033C16
|
||||
|
||||
24 MHz:
|
||||
|
||||
46B96A0020000C 7C00 7C01 7C02 7C03 7D00 7D01 7D02 7D03 7E00 7E01 7E02 7E03 068416
|
||||
|
||||
27 MHz:
|
||||
|
||||
46B96A0020000C B000 B001 B002 B003 B100 B101 B102 B103 B200 B201 B202 B203 08F416
|
||||
|
||||
|
||||
Ranges vs trim value
|
||||
--------------------
|
||||
|
||||
46 B9 6A 00 20 00 0C 00 00 80 00 FF 00 00 01 80 01 FF 01 00 02 80 02 FF 02 00 03 80 03 FF 03 06 A4 16
|
||||
46 B9 68 00 20 00 0C 36 9B 4E 92 65 E4 36 CB 4E 7D 66 29 36 D1 4E 83 66 05 36 CB 4E C2 66 47 0A EA 16
|
||||
|
||||
first byte determines general trim value... range of ~16 to ~30 MHz, the second byte (00..03) is a fine adjustment.
|
||||
|
||||
|
||||
Clock division?
|
||||
---------------
|
||||
|
||||
5.5 MHz vs 11 Mhz: challenge is about the same. it's likely some kind of clock divider is used!
|
||||
|
||||
5.5 Mhz switch: 01 00 00 FF CC 01 5C 80 clkdiv = 4?
|
||||
11 MHz switch: 01 00 00 FF CC 01 5B 80 clkdiv = 2?
|
||||
22 MHz switch: 01 00 00 FF CC 01 5C 80 clkdiv = 1?
|
||||
|
||||
22 Mhz option packet: 0400005AA5FFFFFF00FFFF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FF01516D405D0201FFFDFFFFFF8BBFF7FE
|
||||
11 MHz option packet: 0400005AA5FFFFFF00FFFF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FF00A8AF985D0102FFFDFFFFFF8BBFF7FE
|
||||
5.5 MHz option packet: 0400005AA5FFFFFF00FFFF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FF005462585D0004FFFDFFFFFF8BBFF7FE
|
||||
^^ clkdiv?
|
||||
^^^^^^^^ clkspeed
|
||||
|
||||
Always 24 MHz for programming
|
||||
-----------------------------
|
||||
|
||||
Calibration for anything but 24 Mhz (and around that) fails when switching baud. Another observation is that there is no
|
||||
programming speed being calibrated anymore. This may suggest that a fixed speed is used for programming.
|
||||
|
||||
Adjusting BRT calculation to 24 MHz in the switch packet seems to work. So it is really using 24 MHz by default;
|
||||
probably some pre-calibrated value.
|
||||
@ -1,35 +0,0 @@
|
||||
STC15 series USB ISP protocol
|
||||
=============================
|
||||
|
||||
- host does OUT and IN control transfers for write and read
|
||||
- IN transfer with wLength = 132, wValue = 0, wIndex = 0, bRequest = 0 are used for all reads
|
||||
- OUT transfers with arbitrary size are used for writes
|
||||
|
||||
- packets from MCU
|
||||
always start with 0x46 0xb9, similar to serial protocols
|
||||
third byte is packet length
|
||||
followed by data bytes
|
||||
8 bit checksum at the end, looks like 8 bit modular subtraction
|
||||
|
||||
- packet types
|
||||
most likely derived from the serial protocol, at least partially
|
||||
|
||||
info packet
|
||||
- same as with serial protocol
|
||||
|
||||
option packet
|
||||
- generally same as with serial protocol, some header stuff omitted
|
||||
|
||||
- flash data
|
||||
wIndex specifies write address
|
||||
wValue is 0xa55a
|
||||
bRequest is 0x22 for first packet, 0x02 for the following ones
|
||||
unusually encoded: a total of 128 bytes per packet, with every 7 byte checksummed in some way, for a total of 18x7 byte segments and a final 2 byte segment
|
||||
checksum: 8 bit inverted modular sum
|
||||
|
||||
- option packet
|
||||
wIndex is 0
|
||||
wValue is 0xa55a
|
||||
bRequest is 4
|
||||
seems to use the same checksumming scheme
|
||||
|
||||
@ -4,7 +4,7 @@ Placement of configuration values
|
||||
"~" means the bit is a negated boolean. Sometimes values overlap,
|
||||
depending on MCU model.
|
||||
|
||||
In STC12A series, the first 7 MCS bytes have active
|
||||
In STC12A series, the first 4 MCS bytes have active
|
||||
values. Generally, unused bits should be set to 1.
|
||||
|
||||
MCS0
|
||||
@ -47,9 +47,14 @@ MSB 7 6 5 4 3 2 1 0 LSB
|
||||
(or others, depends on MCU model) are held low on POR.
|
||||
|
||||
|
||||
MCS3
|
||||
----
|
||||
|
||||
MCS3 (at index 6!)
|
||||
------------------
|
||||
Unused.
|
||||
|
||||
|
||||
MCS4
|
||||
----
|
||||
|
||||
MSB 7 6 5 4 3 2 1 0 LSB
|
||||
LVD
|
||||
82
doc/stc15-options.txt
Normal file
82
doc/stc15-options.txt
Normal file
@ -0,0 +1,82 @@
|
||||
STC15 series MCS bytes
|
||||
======================
|
||||
|
||||
MCS3 is like early STC15 MCS1.
|
||||
MCS2 is like early STC15 MCS2.
|
||||
MCS4 is like early STC15 MCS0 but with additions.
|
||||
MCSX is like early STC15 MCS12.
|
||||
|
||||
baseline
|
||||
B5 FF F7 BB 9F
|
||||
|
||||
long por disabled
|
||||
B6 FF F7 BB 1F
|
||||
--> MCS4 bit 7 controls POR delay. low => short, high => long
|
||||
|
||||
reset pin as io disabled
|
||||
B8 FF F7 BB 8F
|
||||
--> MCS4 bit 4 controls reset pin. low => reset is normal, high => reset is io
|
||||
|
||||
low voltage reset disabled
|
||||
B6 FF F7 FB 9F
|
||||
--> MCS3 bit 6 controls low voltage reset. low => lv reset enabled, high => disabled
|
||||
|
||||
lvd threshold 2.61v
|
||||
B8 FF F7 BA 9F
|
||||
lvd threshold 2.82v
|
||||
B5 FF F7 B9 9F
|
||||
lvd threshold 3.08v
|
||||
B6 FF F7 B8 9F
|
||||
|
||||
--> MCS3 bits 0-2 control LVD threshold setting. exact mapping not yet clear.
|
||||
|
||||
eeprom lv inhibit disabled
|
||||
B7 FF F7 3B 9F
|
||||
--> MCS3 bit 7 controls eeprom lv inhibit. high => eeprom lv inhibit enabled, low => disabled
|
||||
|
||||
watchdog after reset enabled
|
||||
B6 FF D7 BB 9F
|
||||
--> MCS2 bit 5 controls watchdog after reset. high => disabled, low => enabled
|
||||
|
||||
watchdog prescaler 128
|
||||
B4 FF F6 BB 9F
|
||||
watchdog prescaler 64
|
||||
B5 FF F5 BB 9F
|
||||
watchdog prescaler 32
|
||||
B5 FF F4 BB 9F
|
||||
watchdog prescaler 2
|
||||
B6 FF F0 BB 9F
|
||||
--> MCS2 bits 0-2 control watchdog prescaler. mapping is similar to early STC15.
|
||||
|
||||
wdt stop in idle disabled
|
||||
B7 FF FF BB 9F
|
||||
|
||||
erase eeprom next programming
|
||||
B4 FF F7 BB 9F
|
||||
--> it's somewhere else! it's bit 1 of the extra MCSX byte that is typically 0xfd. low => erase eeprom disabled, high => erase eeprom enabled
|
||||
|
||||
|
||||
p3.3 por state enabled
|
||||
B9 FF F7 BB 97
|
||||
--> MCS4 bit 3 controls the p3.3 state. high => p3.3 high, low => p3.3 low
|
||||
|
||||
p3.1 passthrough from p3.0 enabled
|
||||
B5 FF F7 BB DF
|
||||
--> MCS4 bit 2 controls the p3.1 passthrough. low => passthrough disabled, high => passthrough enabled
|
||||
|
||||
p3.1 push pull enabled
|
||||
B5 FF F7 BB BF
|
||||
--> MCS4 bit 1 controls p3.1 push pull. low => quasi-bidi, high => push-pull
|
||||
|
||||
bsl pindetect enabled
|
||||
B5 FF F7 BB BF
|
||||
--> somewhere else, MCSX bit 0. low => pindetect enabled, high => pindetect disabled.
|
||||
|
||||
|
||||
external oscillator enabled (IAP15F2K61S2)
|
||||
9C 7F F7 BB 9E
|
||||
--> MCS4 bit 0 controls external oscillator. low => use external crystal, high => use RC.
|
||||
|
||||
external oscillator enabled + clock gain low (IAP15F2K61S2)
|
||||
9C 7F F7 BB 9C
|
||||
--> MCS 4 bit controls clock gain. high => high clock gain, low => low clock gain.
|
||||
@ -59,11 +59,6 @@ info packet
|
||||
^^
|
||||
factory calibration adjust for 24 MHz (range 0x40)?
|
||||
|
||||
STC15W4K56S4:
|
||||
46 B9 68 00 34 50 8D FF 73 96 F7 BC 9F 00 5B 7A C0 FD 27 ED 00 00 73 54 00 F5 28 04 06 70 96 02 15 19 1C 1E 23 00 EC E0 04 D7 EA 92 FF FF FF 15 09 25 60 14 BD 16
|
||||
^^
|
||||
core voltage (MCSY)
|
||||
|
||||
IAP15F2K61S2:
|
||||
external osc:
|
||||
46 B9 68 00 2B 50 87 D3 75 9C F7 BB 9E 01 77 70 80 FD 06 57 00 00 71 53 00 F4 49 04 06 58 9C 02 0E 14 17 19 19 00 F4 F4 04 D2 0E 8A 16
|
||||
@ -145,9 +140,8 @@ option packet
|
||||
|
||||
FF FD FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF B5 FF F7 BB 9F 3A 48 16
|
||||
^ ^^^^^^^^^^^^^^
|
||||
MCSX ^^ MCS0-4
|
||||
MCSY
|
||||
(STC15W4)
|
||||
MCSX MCS0-4
|
||||
|
||||
|
||||
MCS bytes
|
||||
---------
|
||||
@ -160,7 +154,7 @@ RC calibration adjust
|
||||
|
||||
0x3f + RC calibration range (0x00, 0x40, 0x80, 0xc0)
|
||||
|
||||
### MCS2 - MCS4, MCSX and MCSY
|
||||
### MCS2 - MCS4 and MCSX
|
||||
|
||||
See stc15-options.txt
|
||||
|
||||
41
setup.py
41
setup.py
@ -1,56 +1,26 @@
|
||||
#!/usr/bin/env python3
|
||||
#
|
||||
# Copyright (c) 2016 Grigori Goronzy <greg@chown.ath.cx>
|
||||
#
|
||||
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
# of this software and associated documentation files (the "Software"), to deal
|
||||
# in the Software without restriction, including without limitation the rights
|
||||
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
# copies of the Software, and to permit persons to whom the Software is
|
||||
# furnished to do so, subject to the following conditions:
|
||||
#
|
||||
# The above copyright notice and this permission notice shall be included in all
|
||||
# copies or substantial portions of the Software.
|
||||
#
|
||||
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
# SOFTWARE.
|
||||
#
|
||||
|
||||
import stcgal
|
||||
from setuptools import setup, find_packages
|
||||
|
||||
with open("doc/PyPI.md", "r") as fh:
|
||||
long_description = fh.read()
|
||||
|
||||
setup(
|
||||
name = "stcgal",
|
||||
version = stcgal.__version__,
|
||||
packages = find_packages(exclude=["doc", "tests"]),
|
||||
install_requires = ["pyserial>=3.0", "tqdm>=4.0.0"],
|
||||
extras_require = {
|
||||
"usb": ["pyusb>=1.0.0"]
|
||||
},
|
||||
packages = find_packages(exclude=["doc"]),
|
||||
install_requires = ["pyserial"],
|
||||
entry_points = {
|
||||
"console_scripts": [
|
||||
"stcgal = stcgal.frontend:cli",
|
||||
],
|
||||
},
|
||||
description = "STC MCU ISP flash tool",
|
||||
long_description = long_description,
|
||||
long_description_content_type = "text/markdown",
|
||||
keywords = "stc mcu microcontroller 8051 mcs-51",
|
||||
url = "https://github.com/grigorig/stcgal",
|
||||
author = "Grigori Goronzy",
|
||||
author_email = "greg@kinoho.net",
|
||||
license = "MIT License",
|
||||
platforms = "any",
|
||||
classifiers = [
|
||||
"Development Status :: 5 - Production/Stable",
|
||||
"Development Status :: 4 - Beta",
|
||||
"Environment :: Console",
|
||||
"Intended Audience :: Developers",
|
||||
"License :: OSI Approved :: MIT License",
|
||||
@ -58,12 +28,7 @@ setup(
|
||||
"Operating System :: Microsoft :: Windows",
|
||||
"Operating System :: MacOS",
|
||||
"Programming Language :: Python :: 3",
|
||||
"Programming Language :: Python :: 3.4",
|
||||
"Programming Language :: Python :: 3.5",
|
||||
"Programming Language :: Python :: 3.6",
|
||||
"Topic :: Software Development :: Embedded Systems",
|
||||
"Topic :: Software Development",
|
||||
],
|
||||
test_suite = "tests",
|
||||
tests_require = ["PyYAML"],
|
||||
)
|
||||
|
||||
@ -1 +1 @@
|
||||
__version__ = "1.6"
|
||||
__version__ = "1.0"
|
||||
|
||||
@ -1,27 +0,0 @@
|
||||
#
|
||||
# Copyright (c) 2013-2015 Grigori Goronzy <greg@chown.ath.cx>
|
||||
#
|
||||
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
# of this software and associated documentation files (the "Software"), to deal
|
||||
# in the Software without restriction, including without limitation the rights
|
||||
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
# copies of the Software, and to permit persons to whom the Software is
|
||||
# furnished to do so, subject to the following conditions:
|
||||
#
|
||||
# The above copyright notice and this permission notice shall be included in all
|
||||
# copies or substantial portions of the Software.
|
||||
#
|
||||
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
# SOFTWARE.
|
||||
#
|
||||
|
||||
import sys
|
||||
import stcgal.frontend
|
||||
|
||||
if __name__ == "__main__":
|
||||
sys.exit(stcgal.frontend.cli())
|
||||
@ -20,22 +20,11 @@
|
||||
# SOFTWARE.
|
||||
#
|
||||
|
||||
import sys
|
||||
import sys, os, time, struct
|
||||
import argparse
|
||||
import stcgal
|
||||
import serial
|
||||
from stcgal.utils import BaudType
|
||||
from stcgal.protocols import Stc89Protocol
|
||||
from stcgal.protocols import Stc12AProtocol
|
||||
from stcgal.protocols import Stc12BProtocol
|
||||
from stcgal.protocols import Stc12Protocol
|
||||
from stcgal.protocols import Stc15Protocol
|
||||
from stcgal.protocols import Stc15AProtocol
|
||||
from stcgal.protocols import StcUsb15Protocol
|
||||
from stcgal.protocols import Stc8Protocol
|
||||
from stcgal.protocols import StcAutoProtocol
|
||||
from stcgal.protocols import StcProtocolException
|
||||
from stcgal.protocols import StcFramingException
|
||||
from stcgal.utils import Utils, BaudType
|
||||
from stcgal.protocols import *
|
||||
from stcgal.ihex import IHex
|
||||
|
||||
class StcGal:
|
||||
@ -43,44 +32,29 @@ class StcGal:
|
||||
|
||||
def __init__(self, opts):
|
||||
self.opts = opts
|
||||
self.initialize_protocol(opts)
|
||||
|
||||
def initialize_protocol(self, opts):
|
||||
"""Initialize protocol backend"""
|
||||
if opts.protocol == "stc89":
|
||||
self.protocol = Stc89Protocol(opts.port, opts.handshake, opts.baud)
|
||||
elif opts.protocol == "stc12a":
|
||||
self.protocol = Stc12AProtocol(opts.port, opts.handshake, opts.baud)
|
||||
elif opts.protocol == "stc12b":
|
||||
self.protocol = Stc12BProtocol(opts.port, opts.handshake, opts.baud)
|
||||
elif opts.protocol == "stc12":
|
||||
self.protocol = Stc12Protocol(opts.port, opts.handshake, opts.baud)
|
||||
elif opts.protocol == "stc15a":
|
||||
self.protocol = Stc15AProtocol(opts.port, opts.handshake, opts.baud,
|
||||
round(opts.trim * 1000))
|
||||
elif opts.protocol == "stc15":
|
||||
else:
|
||||
self.protocol = Stc15Protocol(opts.port, opts.handshake, opts.baud,
|
||||
round(opts.trim * 1000))
|
||||
elif opts.protocol == "stc8":
|
||||
self.protocol = Stc8Protocol(opts.port, opts.handshake, opts.baud,
|
||||
round(opts.trim * 1000))
|
||||
elif opts.protocol == "usb15":
|
||||
self.protocol = StcUsb15Protocol()
|
||||
else:
|
||||
self.protocol = StcAutoProtocol(opts.port, opts.handshake, opts.baud)
|
||||
|
||||
self.protocol.debug = opts.debug
|
||||
|
||||
def emit_options(self, options):
|
||||
"""Set options from command line to protocol handler."""
|
||||
|
||||
for opt in options:
|
||||
for o in options:
|
||||
try:
|
||||
kv = opt.split("=", 1)
|
||||
if len(kv) < 2:
|
||||
raise ValueError("incorrect format")
|
||||
kv = o.split("=", 1)
|
||||
if len(kv) < 2: raise ValueError("incorrect format")
|
||||
self.protocol.set_option(kv[0], kv[1])
|
||||
except ValueError as ex:
|
||||
raise NameError("invalid option '%s' (%s)" % (kv[0], ex))
|
||||
except ValueError as e:
|
||||
raise NameError("invalid option '%s' (%s)" % (kv[0], e))
|
||||
|
||||
def load_file_auto(self, fileobj):
|
||||
"""Load file with Intel Hex autodetection."""
|
||||
@ -93,48 +67,46 @@ class StcGal:
|
||||
binary = hexfile.extract_data()
|
||||
print("%d bytes (Intel HEX)" %len(binary))
|
||||
return binary
|
||||
except ValueError as ex:
|
||||
raise IOError("invalid Intel HEX file (%s)" %ex)
|
||||
except ValueError as e:
|
||||
raise IOError("invalid Intel HEX file (%s)" %e)
|
||||
else:
|
||||
binary = fileobj.read()
|
||||
print("%d bytes (Binary)" %len(binary))
|
||||
return binary
|
||||
|
||||
def program_mcu(self):
|
||||
"""Execute the standard programming flow."""
|
||||
|
||||
code_size = self.protocol.model.code
|
||||
ee_size = self.protocol.model.eeprom
|
||||
|
||||
print("Loading flash: ", end="")
|
||||
sys.stdout.flush()
|
||||
bindata = self.load_file_auto(self.opts.code_image)
|
||||
bindata = self.load_file_auto(self.opts.code_binary)
|
||||
|
||||
# warn if it overflows
|
||||
if len(bindata) > code_size:
|
||||
print("WARNING: code_image overflows into eeprom segment!", file=sys.stderr)
|
||||
print("WARNING: code_binary overflows into eeprom segment!", file=sys.stderr)
|
||||
if len(bindata) > (code_size + ee_size):
|
||||
print("WARNING: code_image truncated!", file=sys.stderr)
|
||||
print("WARNING: code_binary truncated!", file=sys.stderr)
|
||||
bindata = bindata[0:code_size + ee_size]
|
||||
|
||||
# add eeprom data if supplied
|
||||
if self.opts.eeprom_image:
|
||||
if self.opts.eeprom_binary:
|
||||
print("Loading EEPROM: ", end="")
|
||||
sys.stdout.flush()
|
||||
eedata = self.load_file_auto(self.opts.eeprom_image)
|
||||
eedata = self.load_file_auto(self.opts.eeprom_binary)
|
||||
if len(eedata) > ee_size:
|
||||
print("WARNING: eeprom_image truncated!", file=sys.stderr)
|
||||
print("WARNING: eeprom_binary truncated!", file=sys.stderr)
|
||||
eedata = eedata[0:ee_size]
|
||||
if len(bindata) < code_size:
|
||||
bindata += bytes(code_size - len(bindata))
|
||||
elif len(bindata) > code_size:
|
||||
print("WARNING: eeprom_image overlaps code_image!", file=sys.stderr)
|
||||
print("WARNING: eeprom_binary overlaps code_binary!", file=sys.stderr)
|
||||
bindata = bindata[0:code_size]
|
||||
bindata += eedata
|
||||
|
||||
# pad to 512 byte boundary
|
||||
if len(bindata) % 512:
|
||||
bindata += b'\xff' * (512 - len(bindata) % 512)
|
||||
# pad to 256 byte boundary
|
||||
if len(bindata) % 256:
|
||||
bindata += bytes(256 - len(bindata) % 256)
|
||||
|
||||
if self.opts.option: self.emit_options(self.opts.option)
|
||||
|
||||
@ -145,97 +117,65 @@ class StcGal:
|
||||
self.protocol.disconnect()
|
||||
|
||||
def run(self):
|
||||
"""Run programmer, main entry point."""
|
||||
|
||||
if self.opts.version:
|
||||
print("stcgal {}".format(stcgal.__version__))
|
||||
return 0
|
||||
|
||||
try:
|
||||
self.protocol.connect(autoreset=self.opts.autoreset, resetcmd=self.opts.resetcmd)
|
||||
if isinstance(self.protocol, StcAutoProtocol):
|
||||
if not self.protocol.protocol_name:
|
||||
raise StcProtocolException("cannot detect protocol")
|
||||
base_protocol = self.protocol
|
||||
self.opts.protocol = self.protocol.protocol_name
|
||||
print("Protocol detected: %s" % self.opts.protocol)
|
||||
# recreate self.protocol with proper protocol class
|
||||
self.initialize_protocol(self.opts)
|
||||
else:
|
||||
base_protocol = None
|
||||
|
||||
self.protocol.initialize(base_protocol)
|
||||
try: self.protocol.connect()
|
||||
except KeyboardInterrupt:
|
||||
sys.stdout.flush()
|
||||
sys.stdout.flush();
|
||||
print("interrupted")
|
||||
return 2
|
||||
except (StcFramingException, StcProtocolException) as ex:
|
||||
sys.stdout.flush()
|
||||
print("Protocol error: %s" % ex, file=sys.stderr)
|
||||
except (StcFramingException, StcProtocolException) as e:
|
||||
sys.stdout.flush();
|
||||
print("Protocol error: %s" % e, file=sys.stderr)
|
||||
self.protocol.disconnect()
|
||||
return 1
|
||||
except serial.SerialException as ex:
|
||||
sys.stdout.flush()
|
||||
print("Serial port error: %s" % ex, file=sys.stderr)
|
||||
return 1
|
||||
except IOError as ex:
|
||||
sys.stdout.flush()
|
||||
print("I/O error: %s" % ex, file=sys.stderr)
|
||||
return 1
|
||||
except Exception as ex:
|
||||
sys.stdout.flush()
|
||||
print("Unexpected error: %s" % ex, file=sys.stderr)
|
||||
except serial.SerialException as e:
|
||||
sys.stdout.flush();
|
||||
print("Serial port error: %s" % e, file=sys.stderr)
|
||||
return 1
|
||||
|
||||
try:
|
||||
if self.opts.code_image:
|
||||
if self.opts.code_binary:
|
||||
self.program_mcu()
|
||||
return 0
|
||||
else:
|
||||
self.protocol.disconnect()
|
||||
return 0
|
||||
except NameError as ex:
|
||||
sys.stdout.flush()
|
||||
print("Option error: %s" % ex, file=sys.stderr)
|
||||
except NameError as e:
|
||||
sys.stdout.flush();
|
||||
print("Option error: %s" % e, file=sys.stderr)
|
||||
self.protocol.disconnect()
|
||||
return 1
|
||||
except (StcFramingException, StcProtocolException) as ex:
|
||||
sys.stdout.flush()
|
||||
print("Protocol error: %s" % ex, file=sys.stderr)
|
||||
except (StcFramingException, StcProtocolException) as e:
|
||||
sys.stdout.flush();
|
||||
print("Protocol error: %s" % e, file=sys.stderr)
|
||||
self.protocol.disconnect()
|
||||
return 1
|
||||
except KeyboardInterrupt:
|
||||
sys.stdout.flush()
|
||||
sys.stdout.flush();
|
||||
print("interrupted", file=sys.stderr)
|
||||
self.protocol.disconnect()
|
||||
return 2
|
||||
except serial.SerialException as ex:
|
||||
print("Serial port error: %s" % ex, file=sys.stderr)
|
||||
except serial.SerialException as e:
|
||||
print("Serial port error: %s" % e, file=sys.stderr)
|
||||
return 1
|
||||
except IOError as ex:
|
||||
sys.stdout.flush()
|
||||
print("I/O error: %s" % ex, file=sys.stderr)
|
||||
except IOError as e:
|
||||
sys.stdout.flush();
|
||||
print("I/O error: %s" % e, file=sys.stderr)
|
||||
self.protocol.disconnect()
|
||||
return 1
|
||||
|
||||
|
||||
def cli():
|
||||
# check arguments
|
||||
parser = argparse.ArgumentParser(formatter_class=argparse.RawDescriptionHelpFormatter,
|
||||
description="stcgal {} - an STC MCU ISP flash tool\n".format(stcgal.__version__) +
|
||||
"(C) 2014-2018 Grigori Goronzy and others\nhttps://github.com/grigorig/stcgal")
|
||||
parser.add_argument("code_image", help="code segment file to flash (BIN/HEX)", type=argparse.FileType("rb"), nargs='?')
|
||||
parser.add_argument("eeprom_image", help="eeprom segment file to flash (BIN/HEX)", type=argparse.FileType("rb"), nargs='?')
|
||||
parser.add_argument("-a", "--autoreset", help="cycle power automatically by asserting DTR", action="store_true")
|
||||
parser.add_argument("-r", "--resetcmd", help="shell command for board power-cycling (instead of DTR assertion)", action="store")
|
||||
parser.add_argument("-P", "--protocol", help="protocol version (default: auto)",
|
||||
choices=["stc89", "stc12a", "stc12b", "stc12", "stc15a", "stc15", "stc8", "usb15", "auto"], default="auto")
|
||||
parser = argparse.ArgumentParser(description="stcgal %s - an STC MCU ISP flash tool" %stcgal.__version__)
|
||||
parser.add_argument("code_binary", help="code segment binary file to flash", type=argparse.FileType("rb"), nargs='?')
|
||||
parser.add_argument("eeprom_binary", help="eeprom segment binary file to flash", type=argparse.FileType("rb"), nargs='?')
|
||||
parser.add_argument("-P", "--protocol", help="protocol version", choices=["stc89", "stc12a", "stc12", "stc15a", "stc15"], default="stc12")
|
||||
parser.add_argument("-p", "--port", help="serial port device", default="/dev/ttyUSB0")
|
||||
parser.add_argument("-b", "--baud", help="transfer baud rate (default: 19200)", type=BaudType(), default=19200)
|
||||
parser.add_argument("-l", "--handshake", help="handshake baud rate (default: 2400)", type=BaudType(), default=2400)
|
||||
parser.add_argument("-o", "--option", help="set option (can be used multiple times, see documentation)", action="append")
|
||||
parser.add_argument("-t", "--trim", help="RC oscillator frequency in kHz (STC15+ series only)", type=float, default=0.0)
|
||||
parser.add_argument("-l", "--handshake", help="handshake baud rate (default: 1200)", type=BaudType(), default=1200)
|
||||
parser.add_argument("-o", "--option", help="set option (can be used multiple times)", action="append")
|
||||
parser.add_argument("-t", "--trim", help="RC oscillator frequency in kHz (STC15 series only)", type=float, default=0.0)
|
||||
parser.add_argument("-D", "--debug", help="enable debug output", action="store_true")
|
||||
parser.add_argument("-V", "--version", help="print version info and exit", action="store_true")
|
||||
opts = parser.parse_args()
|
||||
|
||||
# run programmer
|
||||
|
||||
@ -5,20 +5,15 @@
|
||||
import struct
|
||||
import codecs
|
||||
|
||||
|
||||
class IHex:
|
||||
"""Intel HEX parser and writer"""
|
||||
|
||||
class IHex(object):
|
||||
@classmethod
|
||||
def read(cls, lines):
|
||||
"""Read Intel HEX data from string or lines"""
|
||||
ihex = cls()
|
||||
|
||||
segbase = 0
|
||||
for line in lines:
|
||||
line = line.strip()
|
||||
if not line:
|
||||
continue
|
||||
if not line: continue
|
||||
|
||||
t, a, d = ihex.parse_line(line)
|
||||
if t == 0x00:
|
||||
@ -52,7 +47,6 @@ class IHex:
|
||||
|
||||
@classmethod
|
||||
def read_file(cls, fname):
|
||||
"""Read Intel HEX data from file"""
|
||||
f = open(fname, "rb")
|
||||
ihex = cls.read(f)
|
||||
f.close()
|
||||
@ -71,7 +65,6 @@ class IHex:
|
||||
self.row_bytes = row_bytes
|
||||
|
||||
def extract_data(self, start=None, end=None):
|
||||
"""Extract binary data"""
|
||||
if start is None:
|
||||
start = 0
|
||||
|
||||
@ -81,20 +74,19 @@ class IHex:
|
||||
for addr, data in self.areas.items():
|
||||
if addr >= start:
|
||||
if len(result) < (addr - start):
|
||||
result[len(result):addr - start] = bytes(
|
||||
addr - start - len(result))
|
||||
result[len(result):addr-start] = bytes(addr-start-len(result))
|
||||
result[addr-start:addr-start+len(data)] = data
|
||||
|
||||
return bytes(result)
|
||||
|
||||
else:
|
||||
result = bytearray()
|
||||
|
||||
for addr, data in self.areas.items():
|
||||
if addr >= start and addr < end:
|
||||
data = data[:end-addr]
|
||||
if len(result) < (addr - start):
|
||||
result[len(result):addr - start] = bytes(
|
||||
addr - start - len(result))
|
||||
result[len(result):addr-start] = bytes(addr-start-len(result))
|
||||
result[addr-start:addr-start+len(data)] = data
|
||||
|
||||
return bytes(result)
|
||||
@ -123,11 +115,10 @@ class IHex:
|
||||
else:
|
||||
data = self.areas[area]
|
||||
# istart - iend + len(idata) + len(data)
|
||||
self.areas[area] = data[
|
||||
:istart - area] + idata + data[iend - area:]
|
||||
self.areas[area] = data[:istart-area] + idata + data[iend-area:]
|
||||
|
||||
def calc_checksum(self, data):
|
||||
total = sum(data)
|
||||
def calc_checksum(self, bytes):
|
||||
total = sum(bytes)
|
||||
return (-total) & 0xFF
|
||||
|
||||
def parse_line(self, rawline):
|
||||
@ -135,31 +126,33 @@ class IHex:
|
||||
raise ValueError("Invalid line start character (%r)" % rawline[0])
|
||||
|
||||
try:
|
||||
#line = rawline[1:].decode("hex")
|
||||
line = codecs.decode(rawline[1:], "hex_codec")
|
||||
except ValueError:
|
||||
except:
|
||||
raise ValueError("Invalid hex data")
|
||||
|
||||
length, addr, line_type = struct.unpack(">BHB", line[:4])
|
||||
length, addr, type = struct.unpack(">BHB", line[:4])
|
||||
|
||||
dataend = length + 4
|
||||
data = line[4:dataend]
|
||||
|
||||
#~ print line[dataend:dataend + 2], repr(line)
|
||||
cs1 = line[dataend]
|
||||
cs2 = self.calc_checksum(line[:dataend])
|
||||
|
||||
if cs1 != cs2:
|
||||
raise ValueError("Checksums do not match")
|
||||
|
||||
return (line_type, addr, data)
|
||||
return (type, addr, data)
|
||||
|
||||
def make_line(self, line_type, addr, data):
|
||||
line = struct.pack(">BHB", len(data), addr, line_type)
|
||||
def make_line(self, type, addr, data):
|
||||
line = struct.pack(">BHB", len(data), addr, type)
|
||||
line += data
|
||||
line += chr(self.calc_checksum(line))
|
||||
#~ return ":" + line.encode("hex")
|
||||
return ":" + line.encode("hex").upper() + "\r\n"
|
||||
|
||||
def write(self):
|
||||
"""Write Intel HEX data to string"""
|
||||
output = ""
|
||||
|
||||
for start, data in sorted(self.areas.items()):
|
||||
@ -181,8 +174,7 @@ class IHex:
|
||||
addr = t
|
||||
|
||||
if newsegbase != segbase:
|
||||
output += self.make_line(
|
||||
0x02, 0, struct.pack(">H", newsegbase))
|
||||
output += self.make_line(0x02, 0, struct.pack(">H", newsegbase))
|
||||
segbase = newsegbase
|
||||
|
||||
elif self.mode == 32:
|
||||
@ -190,8 +182,7 @@ class IHex:
|
||||
addr = addr & 0xFFFF
|
||||
|
||||
if newsegbase != segbase:
|
||||
output += self.make_line(
|
||||
0x04, 0, struct.pack(">H", newsegbase))
|
||||
output += self.make_line(0x04, 0, struct.pack(">H", newsegbase))
|
||||
segbase = newsegbase
|
||||
|
||||
output += self.make_line(0x00, addr, chunk)
|
||||
@ -201,17 +192,14 @@ class IHex:
|
||||
|
||||
if self.start is not None:
|
||||
if self.mode == 16:
|
||||
output += self.make_line(
|
||||
0x03, 0, struct.pack(">2H", self.start[0], self.start[1]))
|
||||
output += self.make_line(0x03, 0, struct.pack(">2H", self.start[0], self.start[1]))
|
||||
elif self.mode == 32:
|
||||
output += self.make_line(
|
||||
0x05, 0, struct.pack(">I", self.start))
|
||||
output += self.make_line(0x05, 0, struct.pack(">I", self.start))
|
||||
|
||||
output += self.make_line(0x01, 0, "")
|
||||
return output
|
||||
|
||||
def write_file(self, fname):
|
||||
"""Write Intel HEX data to file"""
|
||||
f = open(fname, "w")
|
||||
f.write(self.write())
|
||||
f.close()
|
||||
|
||||
170
stcgal/models.py
170
stcgal/models.py
@ -32,79 +32,14 @@ class MCUModelDatabase:
|
||||
MCUModel = collections.namedtuple("MCUModel", ["name", "magic", "total", "code", "eeprom"])
|
||||
|
||||
models = (
|
||||
MCUModel(name='STC8F1K02S2', magic=0xf661, total=20480, code=2048, eeprom=10240),
|
||||
MCUModel(name='STC8F1K04S2', magic=0xf662, total=20480, code=4096, eeprom=8192),
|
||||
MCUModel(name='STC8F1K06S2', magic=0xf663, total=20480, code=6144, eeprom=6144),
|
||||
MCUModel(name='STC8F1K08S2', magic=0xf664, total=20480, code=8192, eeprom=4096),
|
||||
MCUModel(name='STC8F1K10S2', magic=0xf665, total=20480, code=10240, eeprom=2048),
|
||||
MCUModel(name='STC8F1K12S2', magic=0xf666, total=20480, code=12288, eeprom=0),
|
||||
MCUModel(name='STC8F1K17S2', magic=0xf667, total=20480, code=17408, eeprom=0),
|
||||
MCUModel(name='STC8F1K02', magic=0xf671, total=20480, code=2048, eeprom=10240),
|
||||
MCUModel(name='STC8F1K04', magic=0xf672, total=20480, code=4096, eeprom=8192),
|
||||
MCUModel(name='STC8F1K06', magic=0xf673, total=20480, code=6144, eeprom=6144),
|
||||
MCUModel(name='STC8F1K08', magic=0xf674, total=20480, code=8192, eeprom=4096),
|
||||
MCUModel(name='STC8F1K10', magic=0xf675, total=20480, code=10240, eeprom=2048),
|
||||
MCUModel(name='STC8F1K12', magic=0xf676, total=20480, code=12288, eeprom=0),
|
||||
MCUModel(name='STC8F1K17', magic=0xf677, total=20480, code=17408, eeprom=0),
|
||||
MCUModel(name='STC15U4K16S4', magic=0xf580, total=65536, code=16384, eeprom=44032),
|
||||
MCUModel(name='STC15U4K24S4', magic=0xf581, total=65536, code=24576, eeprom=35840),
|
||||
MCUModel(name='STC15U4K32S4', magic=0xf582, total=65536, code=32768, eeprom=27648),
|
||||
MCUModel(name='STC15U4K40S4', magic=0xf583, total=65536, code=40960, eeprom=19456),
|
||||
MCUModel(name='STC15U4K48S4', magic=0xf584, total=65536, code=49152, eeprom=11264),
|
||||
MCUModel(name='STC15U4K56S4', magic=0xf585, total=65536, code=57344, eeprom=3072),
|
||||
MCUModel(name='STC8A8K08S4A12', magic=0xf621, total=65536, code=8192, eeprom=57344),
|
||||
MCUModel(name='STC8A8K16S4A12', magic=0xf622, total=65536, code=16384, eeprom=49152),
|
||||
MCUModel(name='STC8A8K24S4A12', magic=0xf623, total=65536, code=24576, eeprom=40960),
|
||||
MCUModel(name='STC8A8K32S4A12', magic=0xf624, total=65536, code=32768, eeprom=32768),
|
||||
MCUModel(name='STC8A8K40S4A12', magic=0xf625, total=65536, code=40960, eeprom=24576),
|
||||
MCUModel(name='STC8A8K48S4A12', magic=0xf626, total=65536, code=49152, eeprom=16384),
|
||||
MCUModel(name='STC8A8K56S4A12', magic=0xf627, total=65536, code=57344, eeprom=8192),
|
||||
MCUModel(name='STC8A8K60S4A12', magic=0xf629, total=65536, code=61440, eeprom=4096),
|
||||
MCUModel(name='STC8A8K64S4A12', magic=0xf628, total=65536, code=65024, eeprom=512),
|
||||
MCUModel(name='STC8A4K08S2A12', magic=0xf651, total=65536, code=8192, eeprom=57344),
|
||||
MCUModel(name='STC8A4K16S2A12', magic=0xf652, total=65536, code=16384, eeprom=49152),
|
||||
MCUModel(name='STC8A4K24S2A12', magic=0xf653, total=65536, code=24576, eeprom=40960),
|
||||
MCUModel(name='STC8A4K32S2A12', magic=0xf654, total=65536, code=32768, eeprom=32768),
|
||||
MCUModel(name='STC8A4K40S2A12', magic=0xf655, total=65536, code=40960, eeprom=24576),
|
||||
MCUModel(name='STC8A4K48S2A12', magic=0xf656, total=65536, code=49152, eeprom=16384),
|
||||
MCUModel(name='STC8A4K56S2A12', magic=0xf657, total=65536, code=57344, eeprom=8192),
|
||||
MCUModel(name='STC8A4K60S2A12', magic=0xf659, total=65536, code=61440, eeprom=4096),
|
||||
MCUModel(name='STC8A4K64S2A12', magic=0xf658, total=65536, code=65024, eeprom=512),
|
||||
MCUModel(name='STC8F8K08S4A12', magic=0xf611, total=65536, code=8192, eeprom=57344),
|
||||
MCUModel(name='STC8F8K16S4A12', magic=0xf612, total=65536, code=16384, eeprom=49152),
|
||||
MCUModel(name='STC8F8K24S4A12', magic=0xf613, total=65536, code=24576, eeprom=40960),
|
||||
MCUModel(name='STC8F8K32S4A12', magic=0xf614, total=65536, code=32768, eeprom=32768),
|
||||
MCUModel(name='STC8F8K40S4A12', magic=0xf615, total=65536, code=40960, eeprom=24576),
|
||||
MCUModel(name='STC8F8K48S4A12', magic=0xf616, total=65536, code=49152, eeprom=16384),
|
||||
MCUModel(name='STC8F8K56S4A12', magic=0xf617, total=65536, code=57344, eeprom=8192),
|
||||
MCUModel(name='STC8F8K60S4A12', magic=0xf619, total=65536, code=61440, eeprom=4096),
|
||||
MCUModel(name='STC8F8K64S4A12', magic=0xf618, total=65536, code=65024, eeprom=512),
|
||||
MCUModel(name='STC8F2K08S4', magic=0xf631, total=65536, code=8192, eeprom=57344),
|
||||
MCUModel(name='STC8F2K16S4', magic=0xf632, total=65536, code=16384, eeprom=49152),
|
||||
MCUModel(name='STC8F2K24S4', magic=0xf633, total=65536, code=24576, eeprom=40960),
|
||||
MCUModel(name='STC8F2K32S4', magic=0xf634, total=65536, code=32768, eeprom=32768),
|
||||
MCUModel(name='STC8F2K40S4', magic=0xf635, total=65536, code=40960, eeprom=24576),
|
||||
MCUModel(name='STC8F2K48S4', magic=0xf636, total=65536, code=49152, eeprom=16384),
|
||||
MCUModel(name='STC8F2K56S4', magic=0xf637, total=65536, code=57344, eeprom=8192),
|
||||
MCUModel(name='STC8F2K60S4', magic=0xf639, total=65536, code=61440, eeprom=4096),
|
||||
MCUModel(name='STC8F2K64S4', magic=0xf638, total=65536, code=65024, eeprom=512),
|
||||
MCUModel(name='STC8F2K08S2', magic=0xf641, total=65536, code=8192, eeprom=57344),
|
||||
MCUModel(name='STC8F2K16S2', magic=0xf642, total=65536, code=16384, eeprom=49152),
|
||||
MCUModel(name='STC8F2K24S2', magic=0xf643, total=65536, code=24576, eeprom=40960),
|
||||
MCUModel(name='STC8F2K32S2', magic=0xf644, total=65536, code=32768, eeprom=32768),
|
||||
MCUModel(name='STC8F2K40S2', magic=0xf645, total=65536, code=40960, eeprom=24576),
|
||||
MCUModel(name='STC8F2K48S2', magic=0xf646, total=65536, code=49152, eeprom=16384),
|
||||
MCUModel(name='STC8F2K56S2', magic=0xf647, total=65536, code=57344, eeprom=8192),
|
||||
MCUModel(name='STC8F2K60S2', magic=0xf649, total=65536, code=61440, eeprom=4096),
|
||||
MCUModel(name='STC8F2K64S2', magic=0xf648, total=65536, code=65024, eeprom=512),
|
||||
MCUModel(name='STC15H4K08S4', magic=0xf601, total=65536, code=8192, eeprom=57344),
|
||||
MCUModel(name='STC15H4K16S4', magic=0xf602, total=65536, code=16384, eeprom=49152),
|
||||
MCUModel(name='STC15H4K24S4', magic=0xf603, total=65536, code=24576, eeprom=40960),
|
||||
MCUModel(name='STC15H4K32S4', magic=0xf604, total=65536, code=32768, eeprom=32768),
|
||||
MCUModel(name='STC15H4K40S4', magic=0xf605, total=65536, code=40960, eeprom=24576),
|
||||
MCUModel(name='STC15H4K48S4', magic=0xf606, total=65536, code=49152, eeprom=16384),
|
||||
MCUModel(name='STC15H4K56S4', magic=0xf607, total=65536, code=57344, eeprom=8192),
|
||||
MCUModel(name='STC15H4K64S4', magic=0xf608, total=65536, code=65024, eeprom=512),
|
||||
MCUModel(name='STC15H4K08S4', magic=0xf601, total=65536, code=8192, eeprom=0),
|
||||
MCUModel(name='STC15H4K16S4', magic=0xf602, total=65536, code=16384, eeprom=0),
|
||||
MCUModel(name='STC15H4K24S4', magic=0xf603, total=65536, code=24576, eeprom=0),
|
||||
MCUModel(name='STC15H4K32S4', magic=0xf604, total=65536, code=32768, eeprom=0),
|
||||
MCUModel(name='STC15H4K40S4', magic=0xf605, total=65536, code=40960, eeprom=0),
|
||||
MCUModel(name='STC15H4K48S4', magic=0xf606, total=65536, code=49152, eeprom=0),
|
||||
MCUModel(name='STC15H4K56S4', magic=0xf607, total=65536, code=57344, eeprom=0),
|
||||
MCUModel(name='STC15H4K64S4', magic=0xf608, total=65536, code=65024, eeprom=0),
|
||||
MCUModel(name='STC15F2K08S2', magic=0xf401, total=65536, code=8192, eeprom=54272),
|
||||
MCUModel(name='STC15F2K16S2', magic=0xf402, total=65536, code=16384, eeprom=46080),
|
||||
MCUModel(name='STC15F2K24S2', magic=0xf403, total=65536, code=24576, eeprom=37888),
|
||||
@ -263,7 +198,6 @@ class MCUModelDatabase:
|
||||
MCUModel(name='STC15W412S', magic=0xf51c, total=16384, code=12288, eeprom=1024),
|
||||
MCUModel(name='IAP15W413S', magic=0xf55d, total=16384, code=13312, eeprom=0),
|
||||
MCUModel(name='IRC15W415S', magic=0xf55e, total=16384, code=15872, eeprom=0),
|
||||
MCUModel(name='JX15W415S', magic=0xf55f, total=16384, code=15872, eeprom=0),
|
||||
MCUModel(name='STC15W401AS', magic=0xf52a, total=16384, code=1024, eeprom=12288),
|
||||
MCUModel(name='STC15W402AS', magic=0xf52b, total=16384, code=2048, eeprom=11264),
|
||||
MCUModel(name='STC15W404AS', magic=0xf51e, total=16384, code=4096, eeprom=9216),
|
||||
@ -275,9 +209,6 @@ class MCUModelDatabase:
|
||||
MCUModel(name='STC15W1K08PWM', magic=0xf52d, total=65536, code=8192, eeprom=52224),
|
||||
MCUModel(name='STC15W1K16PWM', magic=0xf52e, total=65536, code=16384, eeprom=44032),
|
||||
MCUModel(name='STC15W1K20S', magic=0xf52f, total=65536, code=20480, eeprom=39936),
|
||||
MCUModel(name='STC15W1K20AS', magic=0xf534, total=65536, code=20480, eeprom=39936),
|
||||
MCUModel(name='STC15W1K32AS', magic=0xf535, total=65536, code=32768, eeprom=27648),
|
||||
MCUModel(name='STC15W1K48AS', magic=0xf536, total=65536, code=49152, eeprom=11264),
|
||||
MCUModel(name='STC15W2K32S2', magic=0xf530, total=65536, code=32768, eeprom=27648),
|
||||
MCUModel(name='STC15W2K48S2', magic=0xf531, total=65536, code=49152, eeprom=11264),
|
||||
MCUModel(name='STC15W2K32AS', magic=0xf532, total=65536, code=32768, eeprom=27648),
|
||||
@ -289,7 +220,6 @@ class MCUModelDatabase:
|
||||
MCUModel(name='STC15W4K48S4', magic=0xf527, total=65536, code=49152, eeprom=11264),
|
||||
MCUModel(name='STC15W4K56S4', magic=0xf528, total=65536, code=57344, eeprom=3072),
|
||||
MCUModel(name='IAP15W4K58S4', magic=0xf569, total=65536, code=59392, eeprom=0),
|
||||
MCUModel(name='IAP15W4K58S4-Stu', magic=0xf56d, total=65536, code=59392, eeprom=0),
|
||||
MCUModel(name='IAP15W4K61S4', magic=0xf56a, total=65536, code=62464, eeprom=0),
|
||||
MCUModel(name='IRC15W4K63S4', magic=0xf56b, total=65536, code=65024, eeprom=0),
|
||||
MCUModel(name='U8W', magic=0xf56c, total=65536, code=62464, eeprom=0),
|
||||
@ -882,28 +812,28 @@ class MCUModelDatabase:
|
||||
MCUModel(name='STC12C5420', magic=0xe014, total=32768, code=20480, eeprom=12288),
|
||||
MCUModel(name='STC12C5424', magic=0xe018, total=32768, code=24576, eeprom=12288),
|
||||
MCUModel(name='STC12C5428', magic=0xe01c, total=32768, code=28672, eeprom=12288),
|
||||
MCUModel(name='STC12LE5401AD', magic=0xe0e1, total=32768, code=1024, eeprom=12288),
|
||||
MCUModel(name='STC12LE5402AD', magic=0xe0e2, total=32768, code=2048, eeprom=12288),
|
||||
MCUModel(name='STC12LE5404AD', magic=0xe0e4, total=32768, code=4096, eeprom=12288),
|
||||
MCUModel(name='STC12LE5406AD', magic=0xe0e6, total=32768, code=6144, eeprom=12288),
|
||||
MCUModel(name='STC12LE5408AD', magic=0xe0e8, total=32768, code=8192, eeprom=12288),
|
||||
MCUModel(name='STC12LE5410AD', magic=0xe0ea, total=32768, code=10240, eeprom=12288),
|
||||
MCUModel(name='STC12LE5412AD', magic=0xe0ec, total=32768, code=12288, eeprom=12288),
|
||||
MCUModel(name='STC12LE5401AD', magic=0xe0e1, total=32768, code=1024, eeprom=22016),
|
||||
MCUModel(name='STC12LE5402AD', magic=0xe0e2, total=32768, code=2048, eeprom=20992),
|
||||
MCUModel(name='STC12LE5404AD', magic=0xe0e4, total=32768, code=4096, eeprom=18944),
|
||||
MCUModel(name='STC12LE5406AD', magic=0xe0e6, total=32768, code=6144, eeprom=16896),
|
||||
MCUModel(name='STC12LE5408AD', magic=0xe0e8, total=32768, code=8192, eeprom=10752),
|
||||
MCUModel(name='STC12LE5410AD', magic=0xe0ea, total=32768, code=10240, eeprom=4608),
|
||||
MCUModel(name='STC12LE5412AD', magic=0xe0ec, total=32768, code=12288, eeprom=11776),
|
||||
MCUModel(name='STC12LE5416AD', magic=0xe0f0, total=32768, code=16384, eeprom=12288),
|
||||
MCUModel(name='STC12LE5420AD', magic=0xe0f4, total=32768, code=20480, eeprom=12288),
|
||||
MCUModel(name='STC12LE5424AD', magic=0xe0f8, total=32768, code=24576, eeprom=12288),
|
||||
MCUModel(name='STC12LE5428AD', magic=0xe0fc, total=32768, code=28672, eeprom=12288),
|
||||
MCUModel(name='STC12LE5401', magic=0xe081, total=32768, code=1024, eeprom=12288),
|
||||
MCUModel(name='STC12LE5402', magic=0xe082, total=32768, code=2048, eeprom=12288),
|
||||
MCUModel(name='STC12LE5404', magic=0xe084, total=32768, code=4096, eeprom=12288),
|
||||
MCUModel(name='STC12LE5406', magic=0xe086, total=32768, code=6144, eeprom=12288),
|
||||
MCUModel(name='STC12LE5408', magic=0xe088, total=32768, code=8192, eeprom=12288),
|
||||
MCUModel(name='STC12LE5410', magic=0xe08a, total=32768, code=10240, eeprom=12288),
|
||||
MCUModel(name='STC12LE5412', magic=0xe08c, total=32768, code=12288, eeprom=12288),
|
||||
MCUModel(name='STC12LE5420AD', magic=0xe0f4, total=32768, code=20480, eeprom=8192),
|
||||
MCUModel(name='STC12LE5424AD', magic=0xe0f8, total=32768, code=24576, eeprom=4096),
|
||||
MCUModel(name='STC12LE5428AD', magic=0xe0fc, total=32768, code=28672, eeprom=0),
|
||||
MCUModel(name='STC12LE5401', magic=0xe081, total=32768, code=1024, eeprom=22016),
|
||||
MCUModel(name='STC12LE5402', magic=0xe082, total=32768, code=2048, eeprom=20992),
|
||||
MCUModel(name='STC12LE5404', magic=0xe084, total=32768, code=4096, eeprom=18944),
|
||||
MCUModel(name='STC12LE5406', magic=0xe086, total=32768, code=6144, eeprom=16896),
|
||||
MCUModel(name='STC12LE5408', magic=0xe088, total=32768, code=8192, eeprom=10752),
|
||||
MCUModel(name='STC12LE5410', magic=0xe08a, total=32768, code=10240, eeprom=4608),
|
||||
MCUModel(name='STC12LE5412', magic=0xe08c, total=32768, code=12288, eeprom=11776),
|
||||
MCUModel(name='STC12LE5416', magic=0xe090, total=32768, code=16384, eeprom=12288),
|
||||
MCUModel(name='STC12LE5420', magic=0xe094, total=32768, code=20480, eeprom=12288),
|
||||
MCUModel(name='STC12LE5424', magic=0xe098, total=32768, code=24576, eeprom=12288),
|
||||
MCUModel(name='STC12LE5428', magic=0xe09c, total=32768, code=28672, eeprom=12288),
|
||||
MCUModel(name='STC12LE5420', magic=0xe094, total=32768, code=20480, eeprom=8192),
|
||||
MCUModel(name='STC12LE5424', magic=0xe098, total=32768, code=24576, eeprom=4096),
|
||||
MCUModel(name='STC12LE5428', magic=0xe09c, total=32768, code=28672, eeprom=0),
|
||||
MCUModel(name='STC12C1052AD', magic=0xf211, total=8192, code=1024, eeprom=5120),
|
||||
MCUModel(name='STC12C2052AD', magic=0xf212, total=8192, code=2048, eeprom=4096),
|
||||
MCUModel(name='STC12C3052AD', magic=0xf213, total=8192, code=3072, eeprom=3072),
|
||||
@ -1016,47 +946,6 @@ class MCUModelDatabase:
|
||||
MCUModel(name='STC90LE513AD', magic=0xf18d, total=65536, code=53248, eeprom=10240),
|
||||
MCUModel(name='STC90LE514AD', magic=0xf18e, total=65536, code=57344, eeprom=6144),
|
||||
MCUModel(name='STC90LE516AD', magic=0xf190, total=65536, code=63488, eeprom=0),
|
||||
|
||||
# Warning, these definitions lack a valid eeprom size.
|
||||
# XXX: It's unknown whether these actually exist, they were removed in STC-ISP.
|
||||
MCUModel(name='STC15F04AD', magic=0xd444, total=4096, code=4096, eeprom=0),
|
||||
MCUModel(name='STC15F06AD', magic=0xd446, total=6144, code=6144, eeprom=0),
|
||||
MCUModel(name='STC15F08AD', magic=0xd448, total=8192, code=8192, eeprom=0),
|
||||
MCUModel(name='STC15F10AD', magic=0xd44a, total=10240, code=10240, eeprom=0),
|
||||
MCUModel(name='STC15F12AD', magic=0xd44c, total=12288, code=12288, eeprom=0),
|
||||
MCUModel(name='STC15F04CCP', magic=0xd434, total=4096, code=4096, eeprom=0),
|
||||
MCUModel(name='STC15F06CCP', magic=0xd436, total=6144, code=6144, eeprom=0),
|
||||
MCUModel(name='STC15F08CCP', magic=0xd438, total=8192, code=8192, eeprom=0),
|
||||
MCUModel(name='STC15F10CCP', magic=0xd43a, total=10240, code=10240, eeprom=0),
|
||||
MCUModel(name='STC15F12CCP', magic=0xd43c, total=12288, code=12288, eeprom=0),
|
||||
MCUModel(name='STC15F04', magic=0xd404, total=4096, code=4096, eeprom=0),
|
||||
MCUModel(name='STC15F06', magic=0xd406, total=6144, code=6144, eeprom=0),
|
||||
MCUModel(name='STC15F08', magic=0xd408, total=8192, code=8192, eeprom=0),
|
||||
MCUModel(name='STC15F10', magic=0xd40a, total=10240, code=10240, eeprom=0),
|
||||
MCUModel(name='STC15F12', magic=0xd40c, total=12288, code=12288, eeprom=0),
|
||||
MCUModel(name='IAP15F08AD', magic=0xd458, total=8192, code=8192, eeprom=0),
|
||||
MCUModel(name='IAP15F10AD', magic=0xd45a, total=10240, code=10240, eeprom=0),
|
||||
MCUModel(name='IAP15F12AD', magic=0xd45c, total=12288, code=12288, eeprom=0),
|
||||
MCUModel(name='IAP15F14AD', magic=0xd45e, total=14336, code=14336, eeprom=0),
|
||||
MCUModel(name='STC15L04AD', magic=0xd4c4, total=4096, code=4096, eeprom=0),
|
||||
MCUModel(name='STC15L06AD', magic=0xd4c6, total=6144, code=6144, eeprom=0),
|
||||
MCUModel(name='STC15L08AD', magic=0xd4c8, total=8192, code=8192, eeprom=0),
|
||||
MCUModel(name='STC15L10AD', magic=0xd4ca, total=10240, code=10240, eeprom=0),
|
||||
MCUModel(name='STC15L12AD', magic=0xd4cc, total=12288, code=12288, eeprom=0),
|
||||
MCUModel(name='STC15L04CCP', magic=0xd4b4, total=4096, code=4096, eeprom=0),
|
||||
MCUModel(name='STC15L06CCP', magic=0xd4b6, total=6144, code=6144, eeprom=0),
|
||||
MCUModel(name='STC15L08CCP', magic=0xd4b8, total=8192, code=8192, eeprom=0),
|
||||
MCUModel(name='STC15L10CCP', magic=0xd4ba, total=10240, code=10240, eeprom=0),
|
||||
MCUModel(name='STC15L12CCP', magic=0xd4bc, total=12288, code=12288, eeprom=0),
|
||||
MCUModel(name='STC15L04', magic=0xd484, total=4096, code=4096, eeprom=0),
|
||||
MCUModel(name='STC15L06', magic=0xd486, total=6144, code=6144, eeprom=0),
|
||||
MCUModel(name='STC15L08', magic=0xd488, total=8192, code=8192, eeprom=0),
|
||||
MCUModel(name='STC15L10', magic=0xd48a, total=10240, code=10240, eeprom=0),
|
||||
MCUModel(name='STC15L12', magic=0xd48c, total=12288, code=12288, eeprom=0),
|
||||
MCUModel(name='IAP15L08AD', magic=0xd4d8, total=8192, code=8192, eeprom=0),
|
||||
MCUModel(name='IAP15L10AD', magic=0xd4da, total=10240, code=10240, eeprom=0),
|
||||
MCUModel(name='IAP15L12AD', magic=0xd4dc, total=12288, code=12288, eeprom=0),
|
||||
MCUModel(name='IAP15L14AD', magic=0xd4de, total=14336, code=14336, eeprom=0),
|
||||
)
|
||||
|
||||
@classmethod
|
||||
@ -1072,3 +961,6 @@ class MCUModelDatabase:
|
||||
print(" Magic: %02X%02X" % (model.magic >> 8, model.magic & 0xff))
|
||||
print(" Code flash: %.1f KB" % (model.code / 1024.0))
|
||||
print(" EEPROM flash: %.1f KB" % (model.eeprom / 1024.0))
|
||||
|
||||
|
||||
|
||||
|
||||
@ -1,791 +0,0 @@
|
||||
#
|
||||
# Copyright (c) 2013-2016 Grigori Goronzy <greg@chown.ath.cx>
|
||||
#
|
||||
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
# of this software and associated documentation files (the "Software"), to deal
|
||||
# in the Software without restriction, including without limitation the rights
|
||||
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
# copies of the Software, and to permit persons to whom the Software is
|
||||
# furnished to do so, subject to the following conditions:
|
||||
#
|
||||
# The above copyright notice and this permission notice shall be included in all
|
||||
# copies or substantial portions of the Software.
|
||||
#
|
||||
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
# SOFTWARE.
|
||||
#
|
||||
|
||||
import struct
|
||||
from abc import ABC
|
||||
from stcgal.utils import Utils
|
||||
|
||||
class BaseOption(ABC):
|
||||
"""Base class for options"""
|
||||
|
||||
def __init__(self):
|
||||
self.options = ()
|
||||
self.msr = None
|
||||
|
||||
def print(self):
|
||||
"""Print current configuration to standard output"""
|
||||
print("Target options:")
|
||||
for name, get_func, _ in self.options:
|
||||
print(" %s=%s" % (name, get_func()))
|
||||
|
||||
def set_option(self, name, value):
|
||||
"""Set value of a specific option"""
|
||||
for opt, _, set_func in self.options:
|
||||
if opt == name:
|
||||
print("Option %s=%s" % (name, value))
|
||||
set_func(value)
|
||||
return
|
||||
raise ValueError("unknown")
|
||||
|
||||
def get_option(self, name):
|
||||
"""Get option value for a specific option"""
|
||||
for opt, get_func, _ in self.options:
|
||||
if opt == name:
|
||||
return get_func(name)
|
||||
raise ValueError("unknown")
|
||||
|
||||
def get_msr(self):
|
||||
"""Get array of model-specific configuration registers"""
|
||||
return bytes(self.msr)
|
||||
|
||||
|
||||
class Stc89Option(BaseOption):
|
||||
"""Manipulation STC89 series option byte"""
|
||||
|
||||
def __init__(self, msr):
|
||||
super().__init__()
|
||||
self.msr = msr
|
||||
self.options = (
|
||||
("cpu_6t_enabled", self.get_t6, self.set_t6),
|
||||
("bsl_pindetect_enabled", self.get_pindetect, self.set_pindetect),
|
||||
("eeprom_erase_enabled", self.get_ee_erase, self.set_ee_erase),
|
||||
("clock_gain", self.get_clock_gain, self.set_clock_gain),
|
||||
("ale_enabled", self.get_ale, self.set_ale),
|
||||
("xram_enabled", self.get_xram, self.set_xram),
|
||||
("watchdog_por_enabled", self.get_watchdog, self.set_watchdog),
|
||||
)
|
||||
|
||||
def get_msr(self):
|
||||
return self.msr
|
||||
|
||||
def get_t6(self):
|
||||
return not bool(self.msr & 1)
|
||||
|
||||
def set_t6(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr &= 0xfe
|
||||
self.msr |= 0x01 if not bool(val) else 0x00
|
||||
|
||||
def get_pindetect(self):
|
||||
return not bool(self.msr & 4)
|
||||
|
||||
def set_pindetect(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr &= 0xfb
|
||||
self.msr |= 0x04 if not bool(val) else 0x00
|
||||
|
||||
def get_ee_erase(self):
|
||||
return not bool(self.msr & 8)
|
||||
|
||||
def set_ee_erase(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr &= 0xf7
|
||||
self.msr |= 0x08 if not bool(val) else 0x00
|
||||
|
||||
def get_clock_gain(self):
|
||||
gain = bool(self.msr & 16)
|
||||
return "high" if gain else "low"
|
||||
|
||||
def set_clock_gain(self, val):
|
||||
gains = {"low": 0, "high": 0x10}
|
||||
if val not in gains.keys():
|
||||
raise ValueError("must be one of %s" % list(gains.keys()))
|
||||
self.msr &= 0xef
|
||||
self.msr |= gains[val]
|
||||
|
||||
def get_ale(self):
|
||||
return bool(self.msr & 32)
|
||||
|
||||
def set_ale(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr &= 0xdf
|
||||
self.msr |= 0x20 if bool(val) else 0x00
|
||||
|
||||
def get_xram(self):
|
||||
return bool(self.msr & 64)
|
||||
|
||||
def set_xram(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr &= 0xbf
|
||||
self.msr |= 0x40 if bool(val) else 0x00
|
||||
|
||||
def get_watchdog(self):
|
||||
return not bool(self.msr & 128)
|
||||
|
||||
def set_watchdog(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr &= 0x7f
|
||||
self.msr |= 0x80 if not bool(val) else 0x00
|
||||
|
||||
|
||||
class Stc12AOption(BaseOption):
|
||||
"""Manipulate STC12A series option bytes"""
|
||||
|
||||
def __init__(self, msr):
|
||||
super().__init__()
|
||||
assert len(msr) == 4
|
||||
self.msr = bytearray(msr)
|
||||
|
||||
"""list of options and their handlers"""
|
||||
self.options = (
|
||||
("low_voltage_reset", self.get_low_voltage_detect, self.set_low_voltage_detect),
|
||||
("clock_source", self.get_clock_source, self.set_clock_source),
|
||||
("watchdog_por_enabled", self.get_watchdog, self.set_watchdog),
|
||||
("watchdog_stop_idle", self.get_watchdog_idle, self.set_watchdog_idle),
|
||||
("watchdog_prescale", self.get_watchdog_prescale, self.set_watchdog_prescale),
|
||||
("eeprom_erase_enabled", self.get_ee_erase, self.set_ee_erase),
|
||||
("bsl_pindetect_enabled", self.get_pindetect, self.set_pindetect),
|
||||
)
|
||||
|
||||
def get_low_voltage_detect(self):
|
||||
lvd = bool(self.msr[3] & 64)
|
||||
return "high" if not lvd else "low"
|
||||
|
||||
def set_low_voltage_detect(self, val):
|
||||
lvds = {"low": 1, "high": 0}
|
||||
if val not in lvds.keys():
|
||||
raise ValueError("must be one of %s" % list(lvds.keys()))
|
||||
self.msr[3] &= 0xbf
|
||||
self.msr[3] |= lvds[val] << 6
|
||||
|
||||
def get_clock_source(self):
|
||||
source = bool(self.msr[0] & 2)
|
||||
return "external" if source else "internal"
|
||||
|
||||
def set_clock_source(self, val):
|
||||
sources = {"internal": 0, "external": 1}
|
||||
if val not in sources.keys():
|
||||
raise ValueError("must be one of %s" % list(sources.keys()))
|
||||
self.msr[0] &= 0xfd
|
||||
self.msr[0] |= sources[val] << 1
|
||||
|
||||
def get_watchdog(self):
|
||||
return not bool(self.msr[1] & 32)
|
||||
|
||||
def set_watchdog(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0xdf
|
||||
self.msr[1] |= 0x20 if not val else 0x00
|
||||
|
||||
def get_watchdog_idle(self):
|
||||
return not bool(self.msr[1] & 8)
|
||||
|
||||
def set_watchdog_idle(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0xf7
|
||||
self.msr[1] |= 0x08 if not val else 0x00
|
||||
|
||||
def get_watchdog_prescale(self):
|
||||
return 2 ** (((self.msr[1]) & 0x07) + 1)
|
||||
|
||||
def set_watchdog_prescale(self, val):
|
||||
val = Utils.to_int(val)
|
||||
wd_vals = {2: 0, 4: 1, 8: 2, 16: 3, 32: 4, 64: 5, 128: 6, 256: 7}
|
||||
if val not in wd_vals.keys():
|
||||
raise ValueError("must be one of %s" % list(wd_vals.keys()))
|
||||
self.msr[1] &= 0xf8
|
||||
self.msr[1] |= wd_vals[val]
|
||||
|
||||
def get_ee_erase(self):
|
||||
return not bool(self.msr[2] & 2)
|
||||
|
||||
def set_ee_erase(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xfd
|
||||
self.msr[2] |= 0x02 if not val else 0x00
|
||||
|
||||
def get_pindetect(self):
|
||||
return not bool(self.msr[2] & 1)
|
||||
|
||||
def set_pindetect(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xfe
|
||||
self.msr[2] |= 0x01 if not val else 0x00
|
||||
|
||||
|
||||
class Stc12Option(BaseOption):
|
||||
"""Manipulate STC10/11/12 series option bytes"""
|
||||
|
||||
def __init__(self, msr):
|
||||
super().__init__()
|
||||
assert len(msr) == 4
|
||||
self.msr = bytearray(msr)
|
||||
|
||||
"""list of options and their handlers"""
|
||||
self.options = (
|
||||
("reset_pin_enabled", self.get_reset_pin_enabled, self.set_reset_pin_enabled),
|
||||
("low_voltage_reset", self.get_low_voltage_detect, self.set_low_voltage_detect),
|
||||
("oscillator_stable_delay", self.get_osc_stable_delay, self.set_osc_stable_delay),
|
||||
("por_reset_delay", self.get_por_delay, self.set_por_delay),
|
||||
("clock_gain", self.get_clock_gain, self.set_clock_gain),
|
||||
("clock_source", self.get_clock_source, self.set_clock_source),
|
||||
("watchdog_por_enabled", self.get_watchdog, self.set_watchdog),
|
||||
("watchdog_stop_idle", self.get_watchdog_idle, self.set_watchdog_idle),
|
||||
("watchdog_prescale", self.get_watchdog_prescale, self.set_watchdog_prescale),
|
||||
("eeprom_erase_enabled", self.get_ee_erase, self.set_ee_erase),
|
||||
("bsl_pindetect_enabled", self.get_pindetect, self.set_pindetect),
|
||||
)
|
||||
|
||||
def get_reset_pin_enabled(self):
|
||||
return bool(self.msr[0] & 1)
|
||||
|
||||
def set_reset_pin_enabled(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[0] &= 0xfe
|
||||
self.msr[0] |= 0x01 if bool(val) else 0x00
|
||||
|
||||
def get_low_voltage_detect(self):
|
||||
return not bool(self.msr[0] & 64)
|
||||
|
||||
def set_low_voltage_detect(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[0] &= 0xbf
|
||||
self.msr[0] |= 0x40 if not val else 0x00
|
||||
|
||||
def get_osc_stable_delay(self):
|
||||
return 2 ** (((self.msr[0] >> 4) & 0x03) + 12)
|
||||
|
||||
def set_osc_stable_delay(self, val):
|
||||
val = Utils.to_int(val)
|
||||
osc_vals = {4096: 0, 8192: 1, 16384: 2, 32768: 3}
|
||||
if val not in osc_vals.keys():
|
||||
raise ValueError("must be one of %s" % list(osc_vals.keys()))
|
||||
self.msr[0] &= 0xcf
|
||||
self.msr[0] |= osc_vals[val] << 4
|
||||
|
||||
def get_por_delay(self):
|
||||
delay = not bool(self.msr[1] & 128)
|
||||
return "long" if delay else "short"
|
||||
|
||||
def set_por_delay(self, val):
|
||||
delays = {"short": 1, "long": 0}
|
||||
if val not in delays.keys():
|
||||
raise ValueError("must be one of %s" % list(delays.keys()))
|
||||
self.msr[1] &= 0x7f
|
||||
self.msr[1] |= delays[val] << 7
|
||||
|
||||
def get_clock_gain(self):
|
||||
gain = bool(self.msr[1] & 64)
|
||||
return "high" if gain else "low"
|
||||
|
||||
def set_clock_gain(self, val):
|
||||
gains = {"low": 0, "high": 1}
|
||||
if val not in gains.keys():
|
||||
raise ValueError("must be one of %s" % list(gains.keys()))
|
||||
self.msr[1] &= 0xbf
|
||||
self.msr[1] |= gains[val] << 6
|
||||
|
||||
def get_clock_source(self):
|
||||
source = bool(self.msr[1] & 2)
|
||||
return "external" if source else "internal"
|
||||
|
||||
def set_clock_source(self, val):
|
||||
sources = {"internal": 0, "external": 1}
|
||||
if val not in sources.keys():
|
||||
raise ValueError("must be one of %s" % list(sources.keys()))
|
||||
self.msr[1] &= 0xfd
|
||||
self.msr[1] |= sources[val] << 1
|
||||
|
||||
def get_watchdog(self):
|
||||
return not bool(self.msr[2] & 32)
|
||||
|
||||
def set_watchdog(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xdf
|
||||
self.msr[2] |= 0x20 if not val else 0x00
|
||||
|
||||
def get_watchdog_idle(self):
|
||||
return not bool(self.msr[2] & 8)
|
||||
|
||||
def set_watchdog_idle(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xf7
|
||||
self.msr[2] |= 0x08 if not val else 0x00
|
||||
|
||||
def get_watchdog_prescale(self):
|
||||
return 2 ** (((self.msr[2]) & 0x07) + 1)
|
||||
|
||||
def set_watchdog_prescale(self, val):
|
||||
val = Utils.to_int(val)
|
||||
wd_vals = {2: 0, 4: 1, 8: 2, 16: 3, 32: 4, 64: 5, 128: 6, 256: 7}
|
||||
if val not in wd_vals.keys():
|
||||
raise ValueError("must be one of %s" % list(wd_vals.keys()))
|
||||
self.msr[2] &= 0xf8
|
||||
self.msr[2] |= wd_vals[val]
|
||||
|
||||
def get_ee_erase(self):
|
||||
return not bool(self.msr[3] & 2)
|
||||
|
||||
def set_ee_erase(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[3] &= 0xfd
|
||||
self.msr[3] |= 0x02 if not val else 0x00
|
||||
|
||||
def get_pindetect(self):
|
||||
return not bool(self.msr[3] & 1)
|
||||
|
||||
def set_pindetect(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[3] &= 0xfe
|
||||
self.msr[3] |= 0x01 if not val else 0x00
|
||||
|
||||
|
||||
class Stc15AOption(BaseOption):
|
||||
def __init__(self, msr):
|
||||
super().__init__()
|
||||
assert len(msr) == 13
|
||||
self.msr = bytearray(msr)
|
||||
|
||||
self.options = (
|
||||
("reset_pin_enabled", self.get_reset_pin_enabled, self.set_reset_pin_enabled),
|
||||
("watchdog_por_enabled", self.get_watchdog, self.set_watchdog),
|
||||
("watchdog_stop_idle", self.get_watchdog_idle, self.set_watchdog_idle),
|
||||
("watchdog_prescale", self.get_watchdog_prescale, self.set_watchdog_prescale),
|
||||
("low_voltage_reset", self.get_lvrs, self.set_lvrs),
|
||||
("low_voltage_threshold", self.get_low_voltage, self.set_low_voltage),
|
||||
("eeprom_lvd_inhibit", self.get_eeprom_lvd, self.set_eeprom_lvd),
|
||||
("eeprom_erase_enabled", self.get_ee_erase, self.set_ee_erase),
|
||||
("bsl_pindetect_enabled", self.get_pindetect, self.set_pindetect),
|
||||
)
|
||||
|
||||
def set_trim(self, val):
|
||||
self.msr[3:5] = struct.pack(">H", val)
|
||||
|
||||
def get_reset_pin_enabled(self):
|
||||
return bool(self.msr[0] & 16)
|
||||
|
||||
def set_reset_pin_enabled(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[0] &= 0xef
|
||||
self.msr[0] |= 0x10 if bool(val) else 0x00
|
||||
|
||||
def get_watchdog(self):
|
||||
return not bool(self.msr[2] & 32)
|
||||
|
||||
def set_watchdog(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xdf
|
||||
self.msr[2] |= 0x20 if not val else 0x00
|
||||
|
||||
def get_watchdog_idle(self):
|
||||
return not bool(self.msr[2] & 8)
|
||||
|
||||
def set_watchdog_idle(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xf7
|
||||
self.msr[2] |= 0x08 if not val else 0x00
|
||||
|
||||
def get_watchdog_prescale(self):
|
||||
return 2 ** (((self.msr[2]) & 0x07) + 1)
|
||||
|
||||
def set_watchdog_prescale(self, val):
|
||||
val = Utils.to_int(val)
|
||||
wd_vals = {2: 0, 4: 1, 8: 2, 16: 3, 32: 4, 64: 5, 128: 6, 256: 7}
|
||||
if val not in wd_vals.keys():
|
||||
raise ValueError("must be one of %s" % list(wd_vals.keys()))
|
||||
self.msr[2] &= 0xf8
|
||||
self.msr[2] |= wd_vals[val]
|
||||
|
||||
def get_lvrs(self):
|
||||
return bool(self.msr[1] & 64)
|
||||
|
||||
def set_lvrs(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0xbf
|
||||
self.msr[1] |= 0x40 if val else 0x00
|
||||
|
||||
def get_eeprom_lvd(self):
|
||||
return bool(self.msr[1] & 128)
|
||||
|
||||
def set_eeprom_lvd(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0x7f
|
||||
self.msr[1] |= 0x80 if val else 0x00
|
||||
|
||||
def get_low_voltage(self):
|
||||
return self.msr[1] & 0x07
|
||||
|
||||
def set_low_voltage(self, val):
|
||||
val = Utils.to_int(val)
|
||||
if val not in range(0, 8):
|
||||
raise ValueError("must be one of %s" % list(range(0, 8)))
|
||||
self.msr[1] &= 0xf8
|
||||
self.msr[1] |= val
|
||||
|
||||
def get_ee_erase(self):
|
||||
return not bool(self.msr[12] & 2)
|
||||
|
||||
def set_ee_erase(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[12] &= 0xfd
|
||||
self.msr[12] |= 0x02 if not val else 0x00
|
||||
|
||||
def get_pindetect(self):
|
||||
return not bool(self.msr[12] & 1)
|
||||
|
||||
def set_pindetect(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[12] &= 0xfe
|
||||
self.msr[12] |= 0x01 if not val else 0x00
|
||||
|
||||
|
||||
class Stc15Option(BaseOption):
|
||||
def __init__(self, msr):
|
||||
super().__init__()
|
||||
assert len(msr) >= 4
|
||||
self.msr = bytearray(msr)
|
||||
|
||||
self.options = (
|
||||
("reset_pin_enabled", self.get_reset_pin_enabled, self.set_reset_pin_enabled),
|
||||
("clock_source", self.get_clock_source, self.set_clock_source),
|
||||
("clock_gain", self.get_clock_gain, self.set_clock_gain),
|
||||
("watchdog_por_enabled", self.get_watchdog, self.set_watchdog),
|
||||
("watchdog_stop_idle", self.get_watchdog_idle, self.set_watchdog_idle),
|
||||
("watchdog_prescale", self.get_watchdog_prescale, self.set_watchdog_prescale),
|
||||
("low_voltage_reset", self.get_lvrs, self.set_lvrs),
|
||||
("low_voltage_threshold", self.get_low_voltage, self.set_low_voltage),
|
||||
("eeprom_lvd_inhibit", self.get_eeprom_lvd, self.set_eeprom_lvd),
|
||||
("eeprom_erase_enabled", self.get_ee_erase, self.set_ee_erase),
|
||||
("bsl_pindetect_enabled", self.get_pindetect, self.set_pindetect),
|
||||
("por_reset_delay", self.get_por_delay, self.set_por_delay),
|
||||
("rstout_por_state", self.get_p33_state, self.set_p33_state),
|
||||
("uart2_passthrough", self.get_uart_passthrough, self.set_uart_passthrough),
|
||||
("uart2_pin_mode", self.get_uart_pin_mode, self.set_uart_pin_mode),
|
||||
)
|
||||
|
||||
if len(msr) > 4:
|
||||
self.options += (("cpu_core_voltage", self.get_core_voltage, self.set_core_voltage),)
|
||||
|
||||
def get_reset_pin_enabled(self):
|
||||
return not bool(self.msr[2] & 16)
|
||||
|
||||
def set_reset_pin_enabled(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xef
|
||||
self.msr[2] |= 0x10 if not bool(val) else 0x00
|
||||
|
||||
def get_clock_source(self):
|
||||
source = bool(self.msr[2] & 0x01)
|
||||
return "internal" if source else "external"
|
||||
|
||||
def set_clock_source(self, val):
|
||||
sources = {"internal": 1, "external": 0}
|
||||
if val not in sources.keys():
|
||||
raise ValueError("must be one of %s" % list(sources.keys()))
|
||||
self.msr[2] &= 0xfe
|
||||
self.msr[2] |= sources[val]
|
||||
|
||||
def get_clock_gain(self):
|
||||
gain = bool(self.msr[2] & 0x02)
|
||||
return "high" if gain else "low"
|
||||
|
||||
def set_clock_gain(self, val):
|
||||
gains = {"low": 0, "high": 1}
|
||||
if val not in gains.keys():
|
||||
raise ValueError("must be one of %s" % list(gains.keys()))
|
||||
self.msr[2] &= 0xfd
|
||||
self.msr[2] |= gains[val] << 1
|
||||
|
||||
def get_watchdog(self):
|
||||
return not bool(self.msr[0] & 32)
|
||||
|
||||
def set_watchdog(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[0] &= 0xdf
|
||||
self.msr[0] |= 0x20 if not val else 0x00
|
||||
|
||||
def get_watchdog_idle(self):
|
||||
return not bool(self.msr[0] & 8)
|
||||
|
||||
def set_watchdog_idle(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[0] &= 0xf7
|
||||
self.msr[0] |= 0x08 if not val else 0x00
|
||||
|
||||
def get_watchdog_prescale(self):
|
||||
return 2 ** (((self.msr[0]) & 0x07) + 1)
|
||||
|
||||
def set_watchdog_prescale(self, val):
|
||||
val = Utils.to_int(val)
|
||||
wd_vals = {2: 0, 4: 1, 8: 2, 16: 3, 32: 4, 64: 5, 128: 6, 256: 7}
|
||||
if val not in wd_vals.keys():
|
||||
raise ValueError("must be one of %s" % list(wd_vals.keys()))
|
||||
self.msr[0] &= 0xf8
|
||||
self.msr[0] |= wd_vals[val]
|
||||
|
||||
def get_lvrs(self):
|
||||
return not bool(self.msr[1] & 64)
|
||||
|
||||
def set_lvrs(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0xbf
|
||||
self.msr[1] |= 0x40 if not val else 0x00
|
||||
|
||||
def get_eeprom_lvd(self):
|
||||
return bool(self.msr[1] & 128)
|
||||
|
||||
def set_eeprom_lvd(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0x7f
|
||||
self.msr[1] |= 0x80 if val else 0x00
|
||||
|
||||
def get_low_voltage(self):
|
||||
return self.msr[1] & 0x07
|
||||
|
||||
def set_low_voltage(self, val):
|
||||
val = Utils.to_int(val)
|
||||
if val not in range(0, 8):
|
||||
raise ValueError("must be one of %s" % list(range(0, 8)))
|
||||
self.msr[1] &= 0xf8
|
||||
self.msr[1] |= val
|
||||
|
||||
def get_ee_erase(self):
|
||||
return bool(self.msr[3] & 2)
|
||||
|
||||
def set_ee_erase(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[3] &= 0xfd
|
||||
self.msr[3] |= 0x02 if val else 0x00
|
||||
|
||||
def get_pindetect(self):
|
||||
return not bool(self.msr[3] & 1)
|
||||
|
||||
def set_pindetect(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[3] &= 0xfe
|
||||
self.msr[3] |= 0x01 if not val else 0x00
|
||||
|
||||
def get_por_delay(self):
|
||||
delay = bool(self.msr[2] & 128)
|
||||
return "long" if delay else "short"
|
||||
|
||||
def set_por_delay(self, val):
|
||||
delays = {"short": 0, "long": 1}
|
||||
if val not in delays.keys():
|
||||
raise ValueError("must be one of %s" % list(delays.keys()))
|
||||
self.msr[2] &= 0x7f
|
||||
self.msr[2] |= delays[val] << 7
|
||||
|
||||
def get_p33_state(self):
|
||||
return "high" if self.msr[2] & 0x08 else "low"
|
||||
|
||||
def set_p33_state(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xf7
|
||||
self.msr[2] |= 0x08 if val else 0x00
|
||||
|
||||
def get_uart_passthrough(self):
|
||||
return bool(self.msr[2] & 0x40)
|
||||
|
||||
def set_uart_passthrough(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xbf
|
||||
self.msr[2] |= 0x40 if val else 0x00
|
||||
|
||||
def get_uart_pin_mode(self):
|
||||
return "push-pull" if bool(self.msr[2] & 0x20) else "normal"
|
||||
|
||||
def set_uart_pin_mode(self, val):
|
||||
delays = {"normal": 0, "push-pull": 1}
|
||||
if val not in delays.keys():
|
||||
raise ValueError("must be one of %s" % list(delays.keys()))
|
||||
self.msr[2] &= 0xdf
|
||||
self.msr[2] |= 0x20 if val else 0x00
|
||||
|
||||
def get_core_voltage(self):
|
||||
if self.msr[4] == 0xea: return "low"
|
||||
elif self.msr[4] == 0xf7: return "mid"
|
||||
elif self.msr[4] == 0xfd: return "high"
|
||||
return "unknown"
|
||||
|
||||
def set_core_voltage(self, val):
|
||||
volt_vals = {"low": 0xea, "mid": 0xf7, "high": 0xfd}
|
||||
if val not in volt_vals.keys():
|
||||
raise ValueError("must be one of %s" % list(volt_vals.keys()))
|
||||
self.msr[4] = volt_vals[val]
|
||||
|
||||
class Stc8Option(BaseOption):
|
||||
def __init__(self, msr):
|
||||
super().__init__()
|
||||
assert len(msr) >= 5
|
||||
self.msr = bytearray(msr)
|
||||
|
||||
self.options = (
|
||||
("reset_pin_enabled", self.get_reset_pin_enabled, self.set_reset_pin_enabled),
|
||||
("clock_gain", self.get_clock_gain, self.set_clock_gain),
|
||||
("watchdog_por_enabled", self.get_watchdog, self.set_watchdog),
|
||||
("watchdog_stop_idle", self.get_watchdog_idle, self.set_watchdog_idle),
|
||||
("watchdog_prescale", self.get_watchdog_prescale, self.set_watchdog_prescale),
|
||||
("low_voltage_reset", self.get_lvrs, self.set_lvrs),
|
||||
("low_voltage_threshold", self.get_low_voltage, self.set_low_voltage),
|
||||
("eeprom_erase_enabled", self.get_ee_erase, self.set_ee_erase),
|
||||
("bsl_pindetect_enabled", self.get_pindetect, self.set_pindetect),
|
||||
("por_reset_delay", self.get_por_delay, self.set_por_delay),
|
||||
("rstout_por_state", self.get_p20_state, self.set_p20_state),
|
||||
("uart1_remap", self.get_uart1_remap, self.set_uart1_remap),
|
||||
("uart2_passthrough", self.get_uart_passthrough, self.set_uart_passthrough),
|
||||
("uart2_pin_mode", self.get_uart_pin_mode, self.set_uart_pin_mode),
|
||||
("epwm_open_drain", self.get_epwm_pp, self.set_epwm_pp),
|
||||
("program_eeprom_split", self.get_flash_split, self.set_flash_split),
|
||||
)
|
||||
|
||||
def get_reset_pin_enabled(self):
|
||||
return not bool(self.msr[2] & 16)
|
||||
|
||||
def set_reset_pin_enabled(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xef
|
||||
self.msr[2] |= 0x10 if not bool(val) else 0x00
|
||||
|
||||
def get_clock_gain(self):
|
||||
gain = bool(self.msr[1] & 0x02)
|
||||
return "high" if gain else "low"
|
||||
|
||||
def set_clock_gain(self, val):
|
||||
gains = {"low": 0, "high": 1}
|
||||
if val not in gains.keys():
|
||||
raise ValueError("must be one of %s" % list(gains.keys()))
|
||||
self.msr[1] &= 0xfd
|
||||
self.msr[1] |= gains[val] << 1
|
||||
|
||||
def get_watchdog(self):
|
||||
return not bool(self.msr[3] & 32)
|
||||
|
||||
def set_watchdog(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[3] &= 0xdf
|
||||
self.msr[3] |= 0x20 if not val else 0x00
|
||||
|
||||
def get_watchdog_idle(self):
|
||||
return not bool(self.msr[3] & 8)
|
||||
|
||||
def set_watchdog_idle(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[3] &= 0xf7
|
||||
self.msr[3] |= 0x08 if not val else 0x00
|
||||
|
||||
def get_watchdog_prescale(self):
|
||||
return 2 ** (((self.msr[3]) & 0x07) + 1)
|
||||
|
||||
def set_watchdog_prescale(self, val):
|
||||
val = Utils.to_int(val)
|
||||
wd_vals = {2: 0, 4: 1, 8: 2, 16: 3, 32: 4, 64: 5, 128: 6, 256: 7}
|
||||
if val not in wd_vals.keys():
|
||||
raise ValueError("must be one of %s" % list(wd_vals.keys()))
|
||||
self.msr[3] &= 0xf8
|
||||
self.msr[3] |= wd_vals[val]
|
||||
|
||||
def get_lvrs(self):
|
||||
return not bool(self.msr[2] & 64)
|
||||
|
||||
def set_lvrs(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[2] &= 0xbf
|
||||
self.msr[2] |= 0x40 if not val else 0x00
|
||||
|
||||
def get_low_voltage(self):
|
||||
return 3 - self.msr[2] & 0x03
|
||||
|
||||
def set_low_voltage(self, val):
|
||||
val = Utils.to_int(val)
|
||||
if val not in range(0, 4):
|
||||
raise ValueError("must be one of %s" % list(range(0, 4)))
|
||||
self.msr[2] &= 0xfc
|
||||
self.msr[2] |= 3 - val
|
||||
|
||||
def get_ee_erase(self):
|
||||
return bool(self.msr[0] & 2)
|
||||
|
||||
def set_ee_erase(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[0] &= 0xfd
|
||||
self.msr[0] |= 0x02 if val else 0x00
|
||||
|
||||
def get_pindetect(self):
|
||||
return not bool(self.msr[0] & 1)
|
||||
|
||||
def set_pindetect(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[0] &= 0xfe
|
||||
self.msr[0] |= 0x01 if not val else 0x00
|
||||
|
||||
def get_por_delay(self):
|
||||
delay = bool(self.msr[1] & 128)
|
||||
return "long" if delay else "short"
|
||||
|
||||
def set_por_delay(self, val):
|
||||
delays = {"short": 0, "long": 1}
|
||||
if val not in delays.keys():
|
||||
raise ValueError("must be one of %s" % list(delays.keys()))
|
||||
self.msr[1] &= 0x7f
|
||||
self.msr[1] |= delays[val] << 7
|
||||
|
||||
def get_p20_state(self):
|
||||
return "high" if self.msr[1] & 0x08 else "low"
|
||||
|
||||
def set_p20_state(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0xf7
|
||||
self.msr[1] |= 0x08 if val else 0x00
|
||||
|
||||
def get_uart_passthrough(self):
|
||||
return bool(self.msr[1] & 0x10)
|
||||
|
||||
def set_uart_passthrough(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0xef
|
||||
self.msr[1] |= 0x10 if val else 0x00
|
||||
|
||||
def get_uart_pin_mode(self):
|
||||
return "push-pull" if bool(self.msr[1] & 0x20) else "normal"
|
||||
|
||||
def set_uart_pin_mode(self, val):
|
||||
modes = {"normal": 0, "push-pull": 1}
|
||||
if val not in modes.keys():
|
||||
raise ValueError("must be one of %s" % list(modes.keys()))
|
||||
self.msr[1] &= 0xdf
|
||||
self.msr[1] |= 0x20 if modes[val] else 0x00
|
||||
|
||||
def get_epwm_pp(self):
|
||||
return bool(self.msr[1] & 0x04)
|
||||
|
||||
def set_epwm_pp(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0xfb
|
||||
self.msr[1] |= 0x04 if val else 0x00
|
||||
|
||||
def get_uart1_remap(self):
|
||||
return bool(self.msr[1] & 0x40)
|
||||
|
||||
def set_uart1_remap(self, val):
|
||||
val = Utils.to_bool(val)
|
||||
self.msr[1] &= 0xbf
|
||||
self.msr[1] |= 0x40 if val else 0x00
|
||||
|
||||
def get_flash_split(self):
|
||||
return self.msr[4] * 256
|
||||
|
||||
def set_flash_split(self, val):
|
||||
num_val = Utils.to_int(val)
|
||||
if num_val < 512 or num_val > 65024 or (num_val % 512) != 0:
|
||||
raise ValueError("must be between 512 and 65024 bytes and a multiple of 512 bytes")
|
||||
self.msr[4] = num_val // 256
|
||||
1663
stcgal/protocols.py
1663
stcgal/protocols.py
File diff suppressed because it is too large
Load Diff
@ -19,43 +19,31 @@
|
||||
# SOFTWARE.
|
||||
#
|
||||
|
||||
import argparse
|
||||
import serial
|
||||
import argparse
|
||||
|
||||
class Utils:
|
||||
"""Common utility functions"""
|
||||
|
||||
@classmethod
|
||||
def to_bool(cls, val):
|
||||
def to_bool(self, val):
|
||||
"""make sensible boolean from string or other type value"""
|
||||
|
||||
if not val:
|
||||
return False
|
||||
if isinstance(val, bool):
|
||||
return val
|
||||
elif isinstance(val, int):
|
||||
return bool(val)
|
||||
if isinstance(val, bool): return val
|
||||
if isinstance(val, int): return bool(val)
|
||||
if len(val) == 0: return False
|
||||
return True if val[0].lower() == "t" or val[0] == "1" else False
|
||||
|
||||
@classmethod
|
||||
def to_int(cls, val):
|
||||
def to_int(self, val):
|
||||
"""make int from any value, nice error message if not possible"""
|
||||
|
||||
try:
|
||||
return int(val, 0)
|
||||
except (TypeError, ValueError):
|
||||
raise ValueError("invalid integer")
|
||||
try: return int(val, 0)
|
||||
except: raise ValueError("invalid integer")
|
||||
|
||||
@classmethod
|
||||
def hexstr(cls, bytestr, sep=""):
|
||||
def hexstr(self, bytestr, sep=""):
|
||||
"""make formatted hex string output from byte sequence"""
|
||||
|
||||
return sep.join(["%02X" % x for x in bytes(bytestr)])
|
||||
|
||||
@classmethod
|
||||
def decode_packed_bcd(cls, byt):
|
||||
"""Decode two-digit packed BCD value"""
|
||||
return (byt & 0x0f) + (10 * (byt >> 4))
|
||||
return sep.join(["%02X" % x for x in bytestr])
|
||||
|
||||
|
||||
class BaudType:
|
||||
@ -67,5 +55,5 @@ class BaudType:
|
||||
raise argparse.ArgumentTypeError("illegal baudrate")
|
||||
return baud
|
||||
|
||||
def __repr__(self):
|
||||
return "baudrate"
|
||||
def __repr__(self): return "baudrate"
|
||||
|
||||
|
||||
@ -1,19 +0,0 @@
|
||||
name: IAP15F2K61S2 programming test
|
||||
protocol: stc15
|
||||
code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
|
||||
responses:
|
||||
- [0x50, 0x87, 0xD3, 0x75, 0x9C, 0xF5, 0x3B, 0x17, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x09, 0x81, 0x00, 0x00, 0x71, 0x53, 0x00, 0xF4, 0x49, 0x04, 0x06, 0x58, 0x9C, 0x02, 0x0E, 0x14, 0x17, 0x19, 0x19, 0x00, 0xF4, 0xF4, 0x04, 0xD2]
|
||||
- [0x00, 0x0B, 0x03, 0x37, 0x04, 0x9A, 0x06, 0x02, 0x06, 0x6B, 0x09, 0x27, 0x0B, 0xE8, 0x0D, 0x0A, 0x12, 0x5A, 0x17, 0x9B, 0x14, 0x8F, 0x1C, 0x96, 0x00, 0x00]
|
||||
- [0x00, 0x0C, 0x09, 0x04, 0x09, 0x09, 0x09, 0x0E, 0x09, 0x0E, 0x09, 0x18, 0x09, 0x1D, 0x12, 0x00, 0x12, 0x0F, 0x12, 0x19, 0x12, 0x23, 0x12, 0x2D, 0x12, 0x37]
|
||||
- [0x01]
|
||||
- [0x05]
|
||||
- [0x03, 0x0D, 0x00, 0x00, 0x21, 0x02, 0x26, 0x32]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x04, 0x54]
|
||||
@ -1,19 +0,0 @@
|
||||
name: STC12C2052AD programming test
|
||||
protocol: stc12a
|
||||
code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
|
||||
responses:
|
||||
- [0x00, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEB, 0x04, 0xEB, 0x58, 0x44, 0x00, 0xF2, 0x12, 0x83, 0xFD, 0xF7, 0xF7, 0xFF, 0xFF, 0xFF, 0xBF, 0xFF, 0xFD, 0xF7, 0xF7, 0xFF]
|
||||
- [0x8F, 0xC0, 0x79, 0x3F, 0xFE, 0x28, 0x85]
|
||||
- [0x8E, 0xC0, 0x79, 0x3F, 0xFE, 0x28]
|
||||
- [0x80]
|
||||
- [0x80]
|
||||
- [0x80]
|
||||
- [0x80]
|
||||
- [0x80]
|
||||
- [0x80, 0x66]
|
||||
- [0x80, 0x80]
|
||||
- [0x80, 0x80]
|
||||
- [0x80, 0x80]
|
||||
- [0x80, 0xEE]
|
||||
- [0x10, 0xC0, 0x16, 0xF7, 0xFF, 0xBF, 0x03, 0xFF, 0x58, 0x44, 0xFD, 0xF7, 0xF7, 0xFF, 0xFF, 0xFF, 0xBF, 0xFF, 0xFD, 0xF7, 0xF7, 0xFF]
|
||||
- [0x80]
|
||||
@ -1,15 +0,0 @@
|
||||
name: STC12C5A60S2 programming test
|
||||
protocol: stc12
|
||||
code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
|
||||
responses:
|
||||
- [0x50, 0x04, 0xBD, 0x04, 0xBC, 0x04, 0xBC, 0x04, 0xBD, 0x04, 0xBC, 0x04, 0xBC, 0x04, 0xBC, 0x04, 0xBC, 0x62, 0x49, 0x00, 0xD1, 0x7E, 0x8C, 0xFF, 0x7F, 0xF7, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x03, 0x00, 0xB0, 0x02, 0x2E, 0x6B, 0x00, 0xCD, 0x80, 0x00, 0x00]
|
||||
- [0x8F]
|
||||
- [0x8F, 0xC0, 0x7E, 0x3F, 0xFE, 0xA0, 0x83, 0x04]
|
||||
- [0x84, 0xC0, 0x7E, 0x3F, 0xFE, 0xA0, 0x04]
|
||||
- [0x00]
|
||||
- [0x00, 0x03]
|
||||
- [0x00, 0x00]
|
||||
- [0x00, 0x00]
|
||||
- [0x00, 0x00]
|
||||
- [0x8D]
|
||||
- [0x50, 0xFF, 0x7F, 0xF7, 0xFF, 0xFF, 0x03, 0xFF, 0x62, 0x49, 0xFF, 0x7F, 0xF7, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x00, 0x03, 0x00, 0xB0, 0x02, 0x2E, 0x6B, 0x00, 0xCD, 0x80, 0x00, 0x00]
|
||||
@ -1,20 +0,0 @@
|
||||
name: STC15F104E programming test
|
||||
protocol: stc15a
|
||||
code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
|
||||
responses:
|
||||
- [0x50, 0x02, 0xB0, 0x02, 0xB0, 0x02, 0xAF, 0x02, 0xB0, 0x02, 0xE6, 0x02, 0xE7, 0x00, 0x00, 0x00, 0x00, 0x67, 0x51, 0xFF, 0xF2, 0x94, 0x8C, 0xEF, 0x3B, 0xF5, 0x58, 0x34, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x58, 0x50, 0x0C, 0x94, 0x21, 0xFF, 0x29]
|
||||
- [0x8f]
|
||||
- [0x65, 0x58, 0x50, 0x0C, 0x95, 0x21, 0xFF, 0x2B, 0xFF, 0xFF, 0x06, 0x06, 0x58, 0x00, 0x02, 0x00, 0x58, 0x80, 0x02, 0x00, 0x58, 0x80, 0x02, 0x00, 0x58, 0xFF, 0x02, 0x00, 0x58, 0x00, 0x02, 0x00, 0x58, 0x80, 0x02, 0x00]
|
||||
- [0x65, 0x58, 0x50, 0x0C, 0x95, 0x21, 0xFF, 0x2B, 0xFF, 0xFF, 0x06, 0x0B, 0x58, 0x24, 0x02, 0x00, 0x58, 0x25, 0x02, 0x00, 0x58, 0x26, 0x02, 0x00, 0x58, 0x27, 0x02, 0x00, 0x58, 0x28, 0x02, 0x00, 0x58, 0x29, 0x02, 0x00, 0x58, 0x2A, 0x02, 0x00, 0x58, 0x2B, 0x02, 0x00, 0x58, 0x2C, 0x02, 0x00, 0x58, 0x2D, 0x02, 0x00, 0x58, 0x2E, 0x02, 0x00]
|
||||
- [0x01]
|
||||
- [0x05]
|
||||
- [0x03, 0x0C, 0x00, 0x00, 0x17, 0x01, 0xA0, 0xE0]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x04, 0x54]
|
||||
@ -1,19 +0,0 @@
|
||||
name: STC15L104W programming test
|
||||
protocol: stc15
|
||||
code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
|
||||
responses:
|
||||
- [0x50, 0x66, 0x3C, 0x93, 0xBA, 0xF7, 0xBB, 0x9F, 0x00, 0x5B, 0x68, 0x00, 0xFD, 0x00, 0x00, 0x00, 0x00, 0x71, 0x51, 0x03, 0xF2, 0xD4, 0x04, 0x06, 0x58, 0xBA, 0x02, 0x2A, 0x31, 0x32, 0x38, 0x30, 0x80, 0x14, 0x10, 0x04, 0xD9]
|
||||
- [0x00, 0x0B, 0x03, 0x0A, 0x04, 0x4F, 0x05, 0x9E, 0x06, 0x20, 0x08, 0xB9, 0x0B, 0x5C, 0x0C, 0x6A, 0x11, 0x7E, 0x16, 0x79, 0x13, 0x77, 0x1A, 0xB1, 0x00, 0x00]
|
||||
- [0x00, 0x0C, 0x04, 0xD6, 0x04, 0xDB, 0x04, 0xE0, 0x04, 0xE0, 0x04, 0xE0, 0x04, 0xE5, 0x11, 0xE2, 0x11, 0xF1, 0x11, 0xFB, 0x12, 0x05, 0x12, 0x0A, 0x12, 0x19]
|
||||
- [0x01]
|
||||
- [0x05]
|
||||
- [0x03, 0x0C, 0x00, 0x00, 0x17, 0x01, 0xA0, 0xE0]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x04, 0x54]
|
||||
@ -1,20 +0,0 @@
|
||||
name: STC15W4K56S4 programming test
|
||||
protocol: stc15
|
||||
code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
|
||||
responses:
|
||||
- [0x50, 0x8D, 0xFF, 0x73, 0x96, 0xF5, 0x7B, 0x9F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x27, 0xED, 0x00, 0x00, 0x73, 0x54, 0x00, 0xF5, 0x28, 0x04, 0x06, 0x70, 0x96, 0x02, 0x15, 0x19, 0x1C, 0x1E, 0x23, 0x00, 0xEC, 0xE0, 0x04, 0xD7, 0xF8, 0x73, 0xBF, 0xFF, 0xFF, 0x15, 0x09, 0x25, 0x60]
|
||||
- [0x00, 0x0B, 0x0D, 0x21, 0x12, 0xBC, 0x18, 0x3E, 0x1A, 0x05, 0x24, 0xFA, 0x2F, 0xB3, 0x34, 0xD1, 0x4A, 0x52, 0x5E, 0xC0, 0x52, 0xDB, 0x73, 0x1A, 0x00, 0x00]
|
||||
- [0x00, 0x0C, 0x23, 0xBF, 0x23, 0xD3, 0x23, 0xE7, 0x23, 0xF6, 0x24, 0x0F, 0x24, 0x23, 0x47, 0x73, 0x47, 0xB9, 0x47, 0xE1, 0x48, 0x09, 0x48, 0x36, 0x48, 0x59]
|
||||
- [0x01]
|
||||
- [0x05]
|
||||
- [0x03, 0xF5, 0x28, 0x00, 0xA5, 0x03, 0x27, 0x49]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x07, 0x54]
|
||||
- [0x04, 0x54]
|
||||
@ -1,19 +0,0 @@
|
||||
name: STC89C52RC programming test
|
||||
protocol: stc89
|
||||
code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
|
||||
responses:
|
||||
- [0x00, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE2, 0x25, 0xE6, 0x43, 0x43, 0xFC, 0xF0, 0x02, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00]
|
||||
- [0x8F, 0xFD, 0xF8, 0x02, 0x10, 0x28, 0x81]
|
||||
- [0x8E, 0xFD, 0xF8, 0x02, 0x10, 0x28]
|
||||
- [0x80]
|
||||
- [0x80]
|
||||
- [0x80]
|
||||
- [0x80]
|
||||
- [0x80]
|
||||
- [0x80, 0x66]
|
||||
- [0x80, 0x80]
|
||||
- [0x80, 0x80]
|
||||
- [0x80, 0x80]
|
||||
- [0x8D, 0xFC, 0xFF, 0xF6, 0xFF]
|
||||
- [0x10, 0xC0, 0x16, 0xF6, 0xFF, 0xF1, 0x03, 0xFF, 0x43, 0x43, 0xFC]
|
||||
- [0x80]
|
||||
@ -1,20 +0,0 @@
|
||||
name: STC8A8K64S4A12 programming test
|
||||
protocol: stc8
|
||||
code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
|
||||
responses:
|
||||
- [0x50, 0x01, 0x6E, 0x0B, 0xD0, 0x78, 0x00, 0x01, 0xFF, 0xFF, 0x8B, 0xBF, 0xFF, 0x28, 0x43, 0xF7, 0xFE, 0x73, 0x55, 0x00, 0xF6, 0x28, 0x09, 0x85, 0xE3, 0x5F, 0x80, 0x07, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0xFE, 0x05, 0x3A, 0x17, 0x05, 0x25, 0x91, 0xFF]
|
||||
- [0x00, 0x0C, 0x37, 0x49, 0x3B, 0x8D, 0x3F, 0xE0, 0x44, 0x57, 0x48, 0x9E, 0x4D, 0x06, 0x51, 0x35, 0x55, 0x94, 0x59, 0xCF, 0x5D, 0xDA, 0x62, 0x3C, 0x66, 0xDA]
|
||||
- [0x00, 0x0C, 0x51, 0x59, 0x51, 0x8C, 0x51, 0xB3, 0x51, 0x71, 0x51, 0x9B, 0x51, 0xC2, 0x51, 0x77, 0x51, 0xAA, 0x51, 0xC8, 0x51, 0x62, 0x51, 0x89, 0x51, 0xB0]
|
||||
- [0x01]
|
||||
- [0x05]
|
||||
- [0x03, 0xF6, 0x28, 0x02, 0xBC, 0x26, 0x98, 0xDF]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x02, 0x54]
|
||||
- [0x07, 0x54]
|
||||
- [0x04, 0x54]
|
||||
@ -1,5 +0,0 @@
|
||||
name: STC8F2K08S2 untrimmed programming test
|
||||
protocol: stc8
|
||||
code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
|
||||
responses:
|
||||
- [0x50, 0xFF, 0xFF, 0xFF, 0xFF, 0x8F, 0x00, 0x04, 0xFF, 0xFF, 0x8B, 0xFD, 0xFF, 0x27, 0x38, 0xF5, 0x73, 0x73, 0x55, 0x00, 0xF6, 0x41, 0x0A, 0x88, 0x86, 0x6F, 0x8F, 0x08, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x20, 0x05, 0x3C, 0x18, 0x05, 0x22, 0x32, 0xFF]
|
||||
@ -1,120 +0,0 @@
|
||||
#
|
||||
# Copyright (c) 2017 Grigori Goronzy <greg@chown.ath.cx>
|
||||
#
|
||||
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
# of this software and associated documentation files (the "Software"), to deal
|
||||
# in the Software without restriction, including without limitation the rights
|
||||
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
# copies of the Software, and to permit persons to whom the Software is
|
||||
# furnished to do so, subject to the following conditions:
|
||||
#
|
||||
# The above copyright notice and this permission notice shall be included in all
|
||||
# copies or substantial portions of the Software.
|
||||
#
|
||||
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
# SOFTWARE.
|
||||
#
|
||||
|
||||
"""Tests with fuzzing of input data"""
|
||||
|
||||
import random
|
||||
import sys
|
||||
import unittest
|
||||
from unittest.mock import patch
|
||||
import yaml
|
||||
import stcgal.frontend
|
||||
import stcgal.protocols
|
||||
from tests.test_program import get_default_opts, convert_to_bytes
|
||||
|
||||
class ByteArrayFuzzer:
|
||||
"""Fuzzer for byte arrays"""
|
||||
|
||||
def __init__(self):
|
||||
self.rng = random.Random()
|
||||
self.cut_propability = 0.01 # probability for cutting off an array early
|
||||
self.cut_min = 0 # minimum cut amount
|
||||
self.cut_max = sys.maxsize # maximum cut amount
|
||||
self.bitflip_probability = 0.0001 # probability for flipping a bit
|
||||
self.randomize_probability = 0.001 # probability for randomizing a char
|
||||
|
||||
def fuzz(self, inp):
|
||||
"""Fuzz an array of bytes according to predefined settings"""
|
||||
arr = bytearray(inp)
|
||||
arr = self.cut_off(arr)
|
||||
self.randomize(arr)
|
||||
return bytes(arr)
|
||||
|
||||
def randomize(self, arr):
|
||||
"""Randomize array contents with bitflips and random bytes"""
|
||||
for i, _ in enumerate(arr):
|
||||
for j in range(8):
|
||||
if self.rng.random() < self.bitflip_probability:
|
||||
arr[i] ^= (1 << j)
|
||||
if self.rng.random() < self.randomize_probability:
|
||||
arr[i] = self.rng.getrandbits(8)
|
||||
|
||||
def cut_off(self, arr):
|
||||
"""Cut off data from end of array"""
|
||||
if self.rng.random() < self.cut_propability:
|
||||
cut_limit = min(len(arr), self.cut_max)
|
||||
cut_len = self.rng.randrange(self.cut_min, cut_limit)
|
||||
arr = arr[0:len(arr) - cut_len]
|
||||
return arr
|
||||
|
||||
class TestProgramFuzzed(unittest.TestCase):
|
||||
"""Special programming cycle tests that use a fuzzing approach"""
|
||||
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
@patch("sys.stderr")
|
||||
def test_program_fuzz(self, err, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test programming cycles with fuzzing enabled"""
|
||||
yml = [
|
||||
"./tests/iap15f2k61s2.yml",
|
||||
"./tests/stc12c2052ad.yml",
|
||||
"./tests/stc15w4k56s4.yml",
|
||||
"./tests/stc12c5a60s2.yml",
|
||||
"./tests/stc89c52rc.yml",
|
||||
"./tests/stc15l104w.yml",
|
||||
"./tests/stc15f104e.yml",
|
||||
"./tests/stc8a8k64s4a12.yml",
|
||||
]
|
||||
fuzzer = ByteArrayFuzzer()
|
||||
fuzzer.cut_propability = 0.01
|
||||
fuzzer.bitflip_probability = 0.005
|
||||
fuzzer.rng = random.Random(1)
|
||||
for y in yml:
|
||||
with self.subTest(msg="trace {}".format(y)):
|
||||
self.single_fuzz(y, serial_mock, fuzzer, read_mock, err, out,
|
||||
sleep_mock, write_mock)
|
||||
|
||||
def single_fuzz(self, yml, serial_mock, fuzzer, read_mock, err, out, sleep_mock, write_mock):
|
||||
"""Test a single programming cycle with fuzzing"""
|
||||
with open(yml) as test_file:
|
||||
test_data = yaml.load(test_file.read())
|
||||
for _ in range(1000):
|
||||
with self.subTest():
|
||||
opts = get_default_opts()
|
||||
opts.protocol = test_data["protocol"]
|
||||
opts.code_image.read.return_value = bytes(test_data["code_data"])
|
||||
serial_mock.return_value.inWaiting.return_value = 1
|
||||
fuzzed_responses = []
|
||||
for arr in convert_to_bytes(test_data["responses"]):
|
||||
fuzzed_responses.append(fuzzer.fuzz(arr))
|
||||
read_mock.side_effect = fuzzed_responses
|
||||
gal = stcgal.frontend.StcGal(opts)
|
||||
self.assertGreaterEqual(gal.run(), 0)
|
||||
err.reset_mock()
|
||||
out.reset_mock()
|
||||
sleep_mock.reset_mock()
|
||||
serial_mock.reset_mock()
|
||||
write_mock.reset_mock()
|
||||
read_mock.reset_mock()
|
||||
@ -1,164 +0,0 @@
|
||||
#
|
||||
# Copyright (c) 2017 Grigori Goronzy <greg@chown.ath.cx>
|
||||
#
|
||||
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
# of this software and associated documentation files (the "Software"), to deal
|
||||
# in the Software without restriction, including without limitation the rights
|
||||
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
# copies of the Software, and to permit persons to whom the Software is
|
||||
# furnished to do so, subject to the following conditions:
|
||||
#
|
||||
# The above copyright notice and this permission notice shall be included in all
|
||||
# copies or substantial portions of the Software.
|
||||
#
|
||||
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
# SOFTWARE.
|
||||
#
|
||||
|
||||
"""Tests that simulate a whole programming cycle"""
|
||||
|
||||
import unittest
|
||||
from unittest.mock import patch
|
||||
import yaml
|
||||
import stcgal.frontend
|
||||
import stcgal.protocols
|
||||
from stcgal.protocols import StcProtocolException
|
||||
|
||||
def convert_to_bytes(list_of_lists):
|
||||
"""Convert lists of integer lists to list of byte lists"""
|
||||
return [bytes(x) for x in list_of_lists]
|
||||
|
||||
def get_default_opts():
|
||||
"""Get a default preconfigured option object"""
|
||||
opts = unittest.mock.MagicMock()
|
||||
opts.protocol = "stc89"
|
||||
opts.autoreset = False
|
||||
opts.port = ""
|
||||
opts.baud = 19200
|
||||
opts.handshake = 9600
|
||||
opts.trim = 22118
|
||||
opts.eeprom_image = None
|
||||
opts.debug = False
|
||||
opts.version = False
|
||||
opts.code_image.name = "test.bin"
|
||||
opts.code_image.read.return_value = b"123456789"
|
||||
return opts
|
||||
|
||||
class ProgramTests(unittest.TestCase):
|
||||
"""Test MCU programming cycles for different families, based on traces"""
|
||||
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
def test_program_stc89(self, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test a programming cycle with STC89 protocol"""
|
||||
self._program_yml("./tests/stc89c52rc.yml", serial_mock, read_mock)
|
||||
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
def test_program_stc12(self, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test a programming cycle with STC12 protocol"""
|
||||
self._program_yml("./tests/stc12c5a60s2.yml", serial_mock, read_mock)
|
||||
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
def test_program_stc12a(self, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test a programming cycle with STC12A protocol"""
|
||||
self._program_yml("./tests/stc12c2052ad.yml", serial_mock, read_mock)
|
||||
|
||||
def test_program_stc12b(self):
|
||||
"""Test a programming cycle with STC12B protocol"""
|
||||
self.skipTest("trace missing")
|
||||
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
def test_program_stc15f2(self, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test a programming cycle with STC15 protocol, F2 series"""
|
||||
self._program_yml("./tests/iap15f2k61s2.yml", serial_mock, read_mock)
|
||||
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
def test_program_stc15w4(self, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test a programming cycle with STC15 protocol, W4 series"""
|
||||
self._program_yml("./tests/stc15w4k56s4.yml", serial_mock, read_mock)
|
||||
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
def test_program_stc8a8(self, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test a programming cycle with STC8 protocol, STC8A8 series"""
|
||||
self._program_yml("./tests/stc8a8k64s4a12.yml", serial_mock, read_mock)
|
||||
|
||||
@unittest.skip("trace is broken")
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
def test_program_stc15a(self, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test a programming cycle with STC15A protocol"""
|
||||
self._program_yml("./tests/stc15f104e.yml", serial_mock, read_mock)
|
||||
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
def test_program_stc15l1(self, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test a programming cycle with STC15 protocol, L1 series"""
|
||||
self._program_yml("./tests/stc15l104w.yml", serial_mock, read_mock)
|
||||
|
||||
@patch("stcgal.protocols.StcBaseProtocol.read_packet")
|
||||
@patch("stcgal.protocols.Stc89Protocol.write_packet")
|
||||
@patch("stcgal.protocols.serial.Serial", autospec=True)
|
||||
@patch("stcgal.protocols.time.sleep")
|
||||
@patch("sys.stdout")
|
||||
def test_program_stc8_untrimmed(self, out, sleep_mock, serial_mock, write_mock, read_mock):
|
||||
"""Test error with untrimmed MCU"""
|
||||
with open("./tests/stc8f2k08s2-untrimmed.yml") as test_file:
|
||||
test_data = yaml.load(test_file.read())
|
||||
opts = get_default_opts()
|
||||
opts.trim = 0.0
|
||||
opts.protocol = test_data["protocol"]
|
||||
opts.code_image.read.return_value = bytes(test_data["code_data"])
|
||||
serial_mock.return_value.inWaiting.return_value = 1
|
||||
read_mock.side_effect = convert_to_bytes(test_data["responses"])
|
||||
gal = stcgal.frontend.StcGal(opts)
|
||||
self.assertEqual(gal.run(), 1)
|
||||
|
||||
def test_program_stc15w4_usb(self):
|
||||
"""Test a programming cycle with STC15W4 USB protocol"""
|
||||
self.skipTest("USB not supported yet, trace missing")
|
||||
|
||||
def _program_yml(self, yml, serial_mock, read_mock):
|
||||
"""Program MCU with data from YAML file"""
|
||||
with open(yml) as test_file:
|
||||
test_data = yaml.load(test_file.read())
|
||||
opts = get_default_opts()
|
||||
opts.protocol = test_data["protocol"]
|
||||
opts.code_image.read.return_value = bytes(test_data["code_data"])
|
||||
serial_mock.return_value.inWaiting.return_value = 1
|
||||
read_mock.side_effect = convert_to_bytes(test_data["responses"])
|
||||
gal = stcgal.frontend.StcGal(opts)
|
||||
self.assertEqual(gal.run(), 0)
|
||||
@ -1,84 +0,0 @@
|
||||
#
|
||||
# Copyright (c) 2017 Grigori Goronzy <greg@chown.ath.cx>
|
||||
#
|
||||
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
# of this software and associated documentation files (the "Software"), to deal
|
||||
# in the Software without restriction, including without limitation the rights
|
||||
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
# copies of the Software, and to permit persons to whom the Software is
|
||||
# furnished to do so, subject to the following conditions:
|
||||
#
|
||||
# The above copyright notice and this permission notice shall be included in all
|
||||
# copies or substantial portions of the Software.
|
||||
#
|
||||
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
# SOFTWARE.
|
||||
#
|
||||
|
||||
"""Tests for utility functions and other misc parts"""
|
||||
|
||||
import argparse
|
||||
import unittest
|
||||
from stcgal.utils import Utils, BaudType
|
||||
|
||||
class TestUtils(unittest.TestCase):
|
||||
"""Test for utility functions in the Utils class"""
|
||||
|
||||
def test_to_bool(self):
|
||||
"""Test special utility function for bool conversion"""
|
||||
self.assertTrue(Utils.to_bool(True))
|
||||
self.assertTrue(Utils.to_bool("true"))
|
||||
self.assertTrue(Utils.to_bool("True"))
|
||||
self.assertTrue(Utils.to_bool("t"))
|
||||
self.assertTrue(Utils.to_bool("T"))
|
||||
self.assertTrue(Utils.to_bool(1))
|
||||
self.assertTrue(Utils.to_bool(-1))
|
||||
self.assertFalse(Utils.to_bool(0))
|
||||
self.assertFalse(Utils.to_bool(None))
|
||||
self.assertFalse(Utils.to_bool("false"))
|
||||
self.assertFalse(Utils.to_bool("False"))
|
||||
self.assertFalse(Utils.to_bool("f"))
|
||||
self.assertFalse(Utils.to_bool("F"))
|
||||
self.assertFalse(Utils.to_bool(""))
|
||||
|
||||
def test_to_int(self):
|
||||
"""Test wrapped integer conversion"""
|
||||
self.assertEqual(Utils.to_int("2"), 2)
|
||||
self.assertEqual(Utils.to_int("0x10"), 16)
|
||||
with self.assertRaises(ValueError):
|
||||
Utils.to_int("a")
|
||||
with self.assertRaises(ValueError):
|
||||
Utils.to_int("")
|
||||
with self.assertRaises(ValueError):
|
||||
Utils.to_int(None)
|
||||
|
||||
def test_hexstr(self):
|
||||
"""Test byte array formatter"""
|
||||
self.assertEqual(Utils.hexstr([10]), "0A")
|
||||
self.assertEqual(Utils.hexstr([1, 2, 3]), "010203")
|
||||
with self.assertRaises(Exception):
|
||||
Utils.hexstr([400, 500])
|
||||
|
||||
def test_decode_packed_bcd(self):
|
||||
"""Test packed BCD decoder"""
|
||||
self.assertEqual(Utils.decode_packed_bcd(0x01), 1)
|
||||
self.assertEqual(Utils.decode_packed_bcd(0x10), 10)
|
||||
self.assertEqual(Utils.decode_packed_bcd(0x11), 11)
|
||||
self.assertEqual(Utils.decode_packed_bcd(0x25), 25)
|
||||
self.assertEqual(Utils.decode_packed_bcd(0x99), 99)
|
||||
|
||||
class TestBaudType(unittest.TestCase):
|
||||
"""Test BaudType class"""
|
||||
|
||||
def test_create_baud_type(self):
|
||||
"""Test creation of BaudType instances"""
|
||||
baud_type = BaudType()
|
||||
self.assertEqual(baud_type("2400"), 2400)
|
||||
self.assertEqual(baud_type("115200"), 115200)
|
||||
with self.assertRaises(argparse.ArgumentTypeError):
|
||||
baud_type("2374882")
|
||||
Reference in New Issue
Block a user