README

RFC-5415 and RFC-5416 compliant CAPWAP WTP (and AC) implementation.

This fork is currently focusing on the WTP side only.

STATUS

NOTE: The WTP has been ported to libev, the AC has not been adjusted and is therefor broken for the moment.

WTP tested and working features:

• 802.11b
• 802.11g
• 802.11a
• WMM/WME (mostly)
• Local MAC
• single radio, single WLAN mode
• 802.11n (draft-ietf-opsawg-capwap-extension-06)
• WPA2-PSK

Only cards with cfg80211 netlink API are supported. The following devices have been tested:

• Atheros AR9280 (Compex WLE200NX)
• Mediatek MT7602E, MT7612E (ZBT WG2626, ALL-WR1200AC_WRT)

Planned WTP features:

• WPA2 Enterprise
• 802.11r - BSS fast transition
• Hybrid-MAC (RFC-7494)

INSTALLATION

Requirements

NOTE: To run WTP you must have a wireless card that has Linux driver based on the Generic IEEE 802.11 Networking Stack (mac80211).

• Linux 4.4 or newer
• automake 1.9 or newer
• autoconf
• libconfig-dev
• libjson0-dev
• libnl-dev
• libev-dev
• libtool
• libxml2-dev
• wolfssl 3.8 or newer

Build

WolfSSL:

./configure --enable-dtls --enable-ipv6 --enable-aesgcm \
            --enable-aesccm --enable-aesni --enable-poly1305 \
            --enable-ecc --enable-ecc25519 --enable-chacha \
            --enable-supportedcurves --enable-dh --enable-psk \
            --disable-des3 --disable-arc4 --prefix=/usr/
make
make install

SmartCAPWAP:

autoreconf -f -i
./configure --disable-ac
make
make install

Debugging / Traceing

The smartcapwap kernel module defines a number of static ftrace events. For a detailed guide on how to use those, see: https://www.kernel.org/doc/Documentation/trace/ftrace.txt

A sample trace session might lock like this:

echo 1 > /sys/kernel/debug/tracing/events/capwap/enable

echo 1 > /sys/kernel/debug/tracing/tracing_on

cat /sys/kernel/debug/tracing/trace_pipe

          <...>-890   [000] ...1 12030.725012: sc_capwap_create:  session:9e04b10c75b3c6537da18d38da5bc70d
          <...>-890   [000] ...1 12030.725048: sc_capwap_sendkeepalive:  session:9e04b10c75b3c6537da18d38da5bc70d
          <...>-890   [000] ...1 12030.725052: sc_capwap_createkeepalive:  session:9e04b10c75b3c6537da18d38da5bc70d
          <...>-890   [000] ...1 12030.725053: sc_capwap_send:  session:9e04b10c75b3c6537da18d38da5bc70d
    ksoftirqd/0-3     [000] ..s1 12030.727270: sc_capwap_parsingpacket:  session:9e04b10c75b3c6537da18d38da5bc70d skb:ffff8802306c8900
            wtp-890   [001] ...1 12060.764008: sc_capwap_sendkeepalive:  session:9e04b10c75b3c6537da18d38da5bc70d
            wtp-890   [001] ...1 12060.764530: sc_capwap_createkeepalive:  session:9e04b10c75b3c6537da18d38da5bc70d
            wtp-890   [001] ...1 12060.764637: sc_capwap_send:  session:9e04b10c75b3c6537da18d38da5bc70d
         <idle>-0     [000] ..s2 12060.787527: sc_capwap_parsingpacket:  session:9e04b10c75b3c6537da18d38da5bc70d skb:ffff8800b8a85900
            wtp-890   [001] ...1 12082.953847: sc_capwap_resetsession:  session:9e04b10c75b3c6537da18d38da5bc70d
            wtp-890   [001] ...1 12082.954005: sc_capwap_close:  session:9e04b10c75b3c6537da18d38da5bc70d
            wtp-890   [001] ...1 12082.954130: sc_capwap_freesession:  session:9e04b10c75b3c6537da18d38da5bc70d

echo 0 > /sys/kernel/debug/tracing/tracing_on