update README

AUTHORS

@@ -0,0 +1 @@
+Andreas Schultz <as@travelping.com>

INSTALL

@@ -19,12 +19,12 @@ Requirements
 * libnl-dev
 * libtool
 * libxml2-dev
-* cyassl 3.0 or newer
+* wolfssl 3.8 or newer
 
 Build
 -----
 
-CyaSSL:
+WolfSSL:
   ./configure --enable-dtls --enable-psk --prefix=/usr/
   make
   make install

LICENSING

@@ -1,3 +1,11 @@
+This is a GPLv2 only fork of SmartCAWAP. The original project
+can be found here: https://bitbucket.org/vemax78/smartcapwap
+
+All changes and contribution to this fork are GPL licensed only.
+
+----
+Original COPYRIGHT and License:
+
 SmartCAPWAP -- An Open Source CAPWAP WTP / AC
 
 Copyright (C) 2012-2013 Massimo Vellucci <vemax78@gmail.com>

README.md

@@ -1 +1,61 @@
-# README #
+# README
+
+[RFC-5415](https://tools.ietf.org/html/rfc5415) and [RFC-5416](https://tools.ietf.org/html/rfc5416) compliant CAPWAP WTP (and AC) implementation.
+
+This fork is currently focusing on the WTP side only.
+
+## STATUS
+
+### WTP tested and working features:
+
+* 802.11b
+* 802.11g
+* WMM/WME (mostly)
+* Local MAC
+* single radio, single WLAN mode
+
+Only cards with cfg80211 netlink API are supported and only
+ath9k cards (in particular Qualcomm Atheros AR5418) have
+been tested.
+
+### Planned WTP features:
+
+* 802.11n ([draft-ietf-opsawg-capwap-extension-06](https://tools.ietf.org/html/draft-ietf-opsawg-capwap-extension-06))
+* encryption (WPA2)
+* Hybrid-MAC ([RFC-7494](https://tools.ietf.org/html/rfc7494))
+
+## INSTALLATION
+
+### Requirements
+
+NOTE: To run WTP you must have a wireless card that has Linux driver based on the
+      Generic IEEE 802.11 Networking Stack (mac80211).
+
+* Linux 4.4 or newer
+* automake 1.9 or newer
+* autoconf
+* libconfig-dev
+* libjson0-dev
+* libnl-dev
+* libtool
+* libxml2-dev
+* wolfssl 3.8 or newer
+
+### Build
+
+WolfSSL:
+
+    ./configure --enable-dtls --enable-ipv6 --enable-aesgcm \
+                --enable-aesccm --enable-aesni --enable-poly1305 \
+	            --enable-ecc --enable-ecc25519 --enable-chacha \
+				--enable-supportedcurves --enable-dh --enable-psk \
+				--disable-des3 --disable-arc4 --prefix=/usr/
+    make
+    make install
+
+SmartCAPWAP:
+
+    autoreconf -f -i
+    ./configure --without-ac
+    make
+    make install