1.4 KiB

Raw Blame History

README

RFC-5415 and RFC-5416 compliant CAPWAP WTP (and AC) implementation.

This fork is currently focusing on the WTP side only.

STATUS

WTP tested and working features:

802.11b
802.11g
WMM/WME (mostly)
Local MAC
single radio, single WLAN mode

Only cards with cfg80211 netlink API are supported and only ath9k cards (in particular Qualcomm Atheros AR5418) have been tested.

Planned WTP features:

802.11n (draft-ietf-opsawg-capwap-extension-06)
encryption (WPA2)
Hybrid-MAC (RFC-7494)

INSTALLATION

Requirements

NOTE: To run WTP you must have a wireless card that has Linux driver based on the Generic IEEE 802.11 Networking Stack (mac80211).

Linux 4.4 or newer
automake 1.9 or newer
autoconf
libconfig-dev
libjson0-dev
libnl-dev
libtool
libxml2-dev
wolfssl 3.8 or newer

Build

WolfSSL:

./configure --enable-dtls --enable-ipv6 --enable-aesgcm \
            --enable-aesccm --enable-aesni --enable-poly1305 \
            --enable-ecc --enable-ecc25519 --enable-chacha \
			--enable-supportedcurves --enable-dh --enable-psk \
			--disable-des3 --disable-arc4 --prefix=/usr/
make
make install

SmartCAPWAP:

autoreconf -f -i
./configure --without-ac
make
make install

1.4 KiB Raw Blame History