README

RFC-5415 and RFC-5416 compliant CAPWAP WTP (and AC) implementation.

This fork is currently focusing on the WTP side only.

STATUS

WTP tested and working features:

802.11b
802.11g
WMM/WME (mostly)
Local MAC
single radio, single WLAN mode
802.11n (draft-ietf-opsawg-capwap-extension-06)

Only cards with cfg80211 netlink API are supported and only ath9k cards (in particular Qualcomm Atheros AR5418) have been tested.

Planned WTP features:

encryption (WPA2)
Hybrid-MAC (RFC-7494)

INSTALLATION

Requirements

NOTE: To run WTP you must have a wireless card that has Linux driver based on the Generic IEEE 802.11 Networking Stack (mac80211).

Linux 4.4 or newer
automake 1.9 or newer
autoconf
libconfig-dev
libjson0-dev
libnl-dev
libtool
libxml2-dev
wolfssl 3.8 or newer

Build

WolfSSL:

./configure --enable-dtls --enable-ipv6 --enable-aesgcm \
            --enable-aesccm --enable-aesni --enable-poly1305 \
            --enable-ecc --enable-ecc25519 --enable-chacha \
            --enable-supportedcurves --enable-dh --enable-psk \
            --disable-des3 --disable-arc4 --prefix=/usr/
make
make install

SmartCAPWAP:

autoreconf -f -i
./configure --without-ac
make
make install

1.5 KiB Raw Blame History