freewtp/README.md

63 lines
1.5 KiB
Markdown
Raw Normal View History

2016-03-07 15:20:19 +01:00
# README
[RFC-5415](https://tools.ietf.org/html/rfc5415) and [RFC-5416](https://tools.ietf.org/html/rfc5416) compliant CAPWAP WTP (and AC) implementation.
This fork is currently focusing on the WTP side only.
## STATUS
### WTP tested and working features:
* 802.11b
* 802.11g
* WMM/WME (mostly)
* Local MAC
* single radio, single WLAN mode
* 802.11n ([draft-ietf-opsawg-capwap-extension-06](https://tools.ietf.org/html/draft-ietf-opsawg-capwap-extension-06))
2016-03-07 15:20:19 +01:00
Only cards with cfg80211 netlink API are supported and only
ath9k cards (in particular Qualcomm Atheros AR5418) have
been tested.
### Planned WTP features:
* encryption (WPA2)
* Hybrid-MAC ([RFC-7494](https://tools.ietf.org/html/rfc7494))
## INSTALLATION
### Requirements
NOTE: To run WTP you must have a wireless card that has Linux driver based on the
Generic IEEE 802.11 Networking Stack (mac80211).
* Linux 4.4 or newer
* automake 1.9 or newer
* autoconf
* libconfig-dev
* libjson0-dev
* libnl-dev
* libtool
* libxml2-dev
* wolfssl 3.8 or newer
2016-03-17 11:34:03 +01:00
2016-03-07 15:20:19 +01:00
### Build
WolfSSL:
./configure --enable-dtls --enable-ipv6 --enable-aesgcm \
--enable-aesccm --enable-aesni --enable-poly1305 \
2016-03-17 11:34:03 +01:00
--enable-ecc --enable-ecc25519 --enable-chacha \
--enable-supportedcurves --enable-dh --enable-psk \
--disable-des3 --disable-arc4 --prefix=/usr/
2016-03-07 15:20:19 +01:00
make
make install
SmartCAPWAP:
autoreconf -f -i
./configure --without-ac
make
make install