1.1 KiB
AC-Tube
Open Source CAPWAP WLC + WTP
Current status: development.
See also http://7u83.cauwersin.com/?cat=28
What you can do so far ...
Read INSTALL and compile actube. Then ...
Create certificates: cd ssl sh all.sh cd ..
Edit src/actube/config.ckv and set your IP in capwap/control-ip-address/address.0
Start actube with some debug options: cd src/ac /actube -d std -d mod -d elem_detail -d elem_dmp
If you have an AP with IOS 7.3x it should connect. Others might connect, too. Make sure on the AP you heve made clear capwap private-config.
In another shell connect to the RPC interface: cd src/ac ./act -s 127.0.0.1:5000
Send some commands to bring up a WLAN: list # list all connected APs select # set to the name of AP you want to select status # show status of selected AP
the following sequence activates a WLAN called actube on AP
load wlan1
send
clear
load activate
send
status # This should display now oper status for # interface 0 enabled
CWAPWAP data layer is still not finished, so you can't use the WLAN