Updated what you can do so far

README.md

@@ -2,11 +2,57 @@ AC-Tube
 =======
 Open Source CAPWAP WLC + WTP
 
-Current status: early development.
+Current status: development.
 
 See also http://7u83.cauwersin.com/?cat=28
 
 What you can do so far ...
 
-Compile as stated in INSTALL.
+Read INSTALL and compile actube.
+Then ...
+
+Create certificates:
+  cd ssl
+  sh all.sh
+  cd ..
+
+Edit src/actube/config.ckv and set your IP in
+capwap/control-ip-address/address.0
+
+Start actube with some debug options:
+  cd src/ac
+  /actube -d std -d mod -d elem\_detail -d elem\_dmp
+
+If you have an AP with IOS 7.3x it should connect. Others
+might connect, too.
+Make sure on the AP you heve made 
+clear capwap private-config.   
+
+In another shell connect to the RPC interface:
+  cd src/ac
+  ./act -s 127.0.0.1:5000
+
+Send some commands to bring up a WLAN:
+   list			# list all connected APs
+   select <apname>	# set <apname> to the name of AP you want to select
+   status 		# show status of selected AP
+  
+   # the following sequence activates a WLAN called actube on AP
+    
+   load wlan1	
+   send      
+   clear                	
+   load activate 
+   send
+
+   status		# This should display now oper status for 
+			# interface 0 enabled
+
+   
+CWAPWAP data layer is still not finished, so you can't use the WLAN   
+	
+
+
+
+