actube/README.md

64 lines
1.2 KiB
Markdown
Raw Normal View History

AC-Tube
=======
Open Source CAPWAP WLC + WTP
2022-09-04 13:47:51 +02:00
Current status: development.
See also http://7u83.cauwersin.com/?cat=28
What you can do so far ...
2022-09-04 13:47:51 +02:00
Read INSTALL and compile actube.
2022-09-04 14:00:43 +02:00
2022-09-04 13:47:51 +02:00
Then ...
Create certificates:
2022-09-04 14:00:43 +02:00
cd ssl
sh all.sh
cd ..
2022-09-04 13:47:51 +02:00
Edit src/actube/config.ckv and set your IP in
capwap/control-ip-address/address.0
Start actube with some debug options:
2022-09-04 14:00:43 +02:00
cd src/ac
./actube -d std -d mod -d elem\_detail -d elem\_dmp
2022-09-04 13:47:51 +02:00
If you have an AP with IOS 7.3x it should connect. Others
might connect, too.
2022-09-04 14:00:43 +02:00
Make sure on the AP you heve made
clear capwap private-config.
In another terminal window connect to the RPC interface:
cd src/ac
./act -s 127.0.0.1:5000
2022-09-04 13:47:51 +02:00
Send some commands to bring up a WLAN:
2022-09-04 14:00:43 +02:00
list # list all connected APs
select <apname> # set <apname> to the name of AP you want to select
status # show status of selected AP
# the following sequence activates a WLAN called actube on AP
load wlan1
send
clear
load activate
send
status # This should display now oper status for
# interface 0 enabled
CWAPWAP data layer is still not finished, so you can't use the WLAN
2022-09-04 13:47:51 +02:00