debian: Update Build-Depends and Depends

This closes #32

Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>

.gitignore

@@ -1,7 +1,12 @@
 *~
 *.pyc
 *.egg-info
-__pycache__
+*.eggs/
+*.pybuild/
+__pycache__/
 /build
 /dist
 /deb_dist
+/debian/stcgal*
+/debian/files
+/.vscode

.travis.yml

@@ -0,0 +1,33 @@
+sudo: required
+dist: trusty
+language: python
+cache:
+  - pip
+python:
+  - "3.4"
+  - "3.5"
+  - "3.6"
+  - "pypy3"
+before_install:
+  - sudo apt install rpm dpkg-dev debhelper dh-python python3-setuptools fakeroot python3-serial python3-yaml
+install:
+  - pip install pyserial pyusb tqdm
+script:
+  - python setup.py build
+  - python setup.py test
+before_deploy:
+  - deactivate
+  - python3 setup.py bdist_rpm
+  - dpkg-buildpackage -uc -us
+  - cp ../*.deb dist/
+deploy:
+  provider: releases
+  api_key: $GH_TOKEN
+  file_glob: true
+  file:
+  - dist/stcgal*_all.deb
+  - dist/stcgal*.noarch.rpm
+  skip_cleanup: true
+  on:
+    tags: true
+    python: "3.4"

README.md

@@ -1,3 +1,5 @@
+[![Build Status](https://travis-ci.org/grigorig/stcgal.svg)](https://travis-ci.org/grigorig/stcgal)
+
 stcgal - STC MCU ISP flash tool
 ===============================
 
@@ -25,14 +27,14 @@ stcgal should fully support STC 89/90/10/11/12/15 series MCUs.
 
 So far, stcgal was tested with the following MCU models:
 
-* STC89C52RC (BSL version: 4.3C)
+* STC89C52RC (BSL version: 4.3C/6.6C)
 * STC90C52RC (BSL version: 4.3C)
 * STC89C54RD+ (BSL version: 4.3C)
 * STC12C2052 (BSL version: 5.8D)
 * STC12C2052AD (BSL version: 5.8D)
 * STC12C5608AD (BSL version: 6.0G)
 * STC12C5A16S2 (BSL version: 6.2I)
-* STC12C5A60S2 (BSL version: 6.2I)
+* STC12C5A60S2 (BSL version: 6.2I/7.1I)
 * STC11F02E (BSL version: 6.5K)
 * STC10F04XE (BSL version: 6.5J)
 * STC11F08XE (BSL version: 6.5M)
@@ -59,7 +61,7 @@ Features
 * Set device options
 * Read unique device ID (STC 10/11/12/15)
 * Trim RC oscillator frequency (STC 15)
-* Automatic power-cycling with DTR toggle
+* Automatic power-cycling with DTR toggle or a custom shell command
 * Automatic UART protocol detection
 
 Installation
@@ -94,6 +96,9 @@ positional arguments:
 optional arguments:
   -h, --help            show this help message and exit
   -a, --autoreset       cycle power automatically by asserting DTR
+  -r RESETCMD, --resetcmd RESETCMD
+                        Use this shell command for board power-cycling
+                        (instead of DTR assertion)
   -P {stc89,stc12a,stc12,stc15a,stc15,auto}, --protocol {stc89,stc12a,stc12,stc15a,stc15,auto}
                         protocol version
   -p PORT, --port PORT  serial port device
@@ -274,7 +279,22 @@ serial interface to automate this. The DTR signal is asserted for
 approximately 500 ms when the autoreset feature is enabled with the
 ```-a``` flag. This requires external circuitry to actually switch the
 power. In some cases, when the microcontroller draws only little power,
-it is possible to directly supply power from the DTR signal, however.
+it is possible to directly supply power from the DTR signal.
+
+As an alternative to DTR, you can use a custom shell command or an external
+script (via -r option) to reset the  device. You should specify the command
+along with -a option. Do not forget the quotes!
+
+Example:
+
+```
+  $ ./stcgal.py -P stc15 -a -r "echo 1 > /sys/class/gpio/gpio666/value"
+```
+or
+
+```
+  $ ./stcgal.py -P stc15 -a -r "./powercycle.sh"
+```
 
 ### Exit status
 

debian/changelog

@@ -1,3 +1,15 @@
+stcgal (1.4) unstable; urgency=low
+
+  * Update to 1.4
+
+ -- Grigori <greg@chown.ath.cx>  Tue, 19 Sep 2017 17:57:11 +0200
+
+stcgal (1.3) unstable; urgency=low
+
+  * Update to 1.3
+
+ -- Grigori Goronzy <greg@chown.ath.cx>  Sat, 10 Jun 2017 10:01:07 +0200
+
 stcgal (1.2) unstable; urgency=low
 
   * Update to 1.2

debian/control

@@ -2,14 +2,14 @@ Source: stcgal
 Section: electronics
 Priority: optional
 Maintainer: Andrew Andrianov <andrew@ncrmnt.org>
-Build-Depends: debhelper (>= 9), python3, python3-setuptools, dh-python
+Build-Depends: debhelper (>= 9), python3, python3-setuptools, dh-python, python3-serial, python3-tqdm, python3-yaml
 Standards-Version: 3.9.5
 Homepage: https://github.com/grigorig/stcgal
 X-Python3-Version: >= 3.2
 
 Package: stcgal
 Architecture: all
-Depends: ${misc:Depends}, python3, python3-serial
+Depends: ${misc:Depends}, python3, python3-serial, python3-tqdm
 Recommends: python3-usb (>= 1.0.0~b2)
 Description: STC MCU ISP flash tool
  stcgal is a command line flash programming tool for STC MCU Ltd.

doc/stc15-usb-protocol.txt

@@ -0,0 +1,46 @@
+STC15 series USB ISP protocol
+=============================
+
+General principle
+-----------------
+
+- host does OUT and IN control transfers for write and read
+- IN transfer with wLength = 132, wValue = 0, wIndex = 0, bRequest = 0 are used for all reads
+- OUT transfers with with specific bRequest, wValue, wIndex are used for writes
+
+
+Packet coding
+-------------
+
+- packets from MCU
+  always start with 0x46 0xb9, similar to serial protocols
+  third byte is packet length, followed by data bytes
+  checksum at the end: 8 bit modular sum
+
+- packets from host
+  no header bytes
+  bRequest sets packet type
+  wValue, wIndex interpretation according to packet type
+  8 bit modular checksum for every 7 bytes, interleaved
+  
+- packet types derived from the serial protocol
+
+Specific packet information
+---------------------------
+
+- flash data
+  wIndex specifies write address
+  wValue is 0xa55a
+  bRequest is 0x22 for first packet, 0x02 for the following ones
+  unusually encoded: a total of 128 bytes per packet,
+  with every 7 byte checksummed in some way,
+  for a total of 18x7 byte segments and a final 2 byte segment
+  checksum: 8 bit modular sum
+
+- option packet
+  generally same as with serial protocol, some header stuff omitted
+  wIndex is 0
+  wValue is 0xa55a
+  bRequest is 4
+  seems to use the same checksumming scheme as flash writes
+

setup.py

@@ -27,7 +27,7 @@ from setuptools import setup, find_packages
 setup(
     name = "stcgal",
     version = stcgal.__version__,
-    packages = find_packages(exclude=["doc"]),
+    packages = find_packages(exclude=["doc", "tests"]),
     install_requires = ["pyserial"],
     extras_require = {
         "usb": ["pyusb>=1.0.0"]
@@ -55,4 +55,6 @@ setup(
         "Topic :: Software Development :: Embedded Systems",
         "Topic :: Software Development",
     ],
+    test_suite = "tests",
+    tests_require = ["PyYAML"],
 )

stcgal/__init__.py

@@ -1 +1 @@
-__version__ = "1.2"
+__version__ = "1.4"

stcgal/__main__.py

@@ -0,0 +1,27 @@
+#
+# Copyright (c) 2013-2015 Grigori Goronzy <greg@chown.ath.cx>
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in all
+# copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+#
+
+import sys
+import stcgal.frontend
+
+if __name__ == "__main__":
+    sys.exit(stcgal.frontend.cli())

stcgal/frontend.py

@@ -20,10 +20,10 @@
 # SOFTWARE.
 #
 
-import sys, os, time, struct
+import sys
 import argparse
 import stcgal
-from stcgal.utils import Utils, BaudType
+from stcgal.utils import BaudType
 from stcgal.protocols import *
 from stcgal.ihex import IHex
 
@@ -32,7 +32,10 @@ class StcGal:
 
     def __init__(self, opts):
         self.opts = opts
+        self.initialize_protocol(opts)
 
+    def initialize_protocol(self, opts):
+        """Initialize protocol backend"""
         if opts.protocol == "stc89":
             self.protocol = Stc89Protocol(opts.port, opts.handshake, opts.baud)
         elif opts.protocol == "stc12a":
@@ -50,18 +53,20 @@ class StcGal:
         elif opts.protocol == "usb15":
             self.protocol = StcUsb15Protocol()
         else:
-            self.protocol = StcBaseProtocol(opts.port, opts.handshake, opts.baud)
+            self.protocol = StcAutoProtocol(opts.port, opts.handshake, opts.baud)
-
         self.protocol.debug = opts.debug
 
     def emit_options(self, options):
-        for o in options:
+        """Set options from command line to protocol handler."""
+
+        for opt in options:
             try:
-                kv = o.split("=", 1)
+                kv = opt.split("=", 1)
-                if len(kv) < 2: raise ValueError("incorrect format")
+                if len(kv) < 2:
+                    raise ValueError("incorrect format")
                 self.protocol.set_option(kv[0], kv[1])
-            except ValueError as e:
+            except ValueError as ex:
-                raise NameError("invalid option '%s' (%s)" % (kv[0], e))
+                raise NameError("invalid option '%s' (%s)" % (kv[0], ex))
 
     def load_file_auto(self, fileobj):
         """Load file with Intel Hex autodetection."""
@@ -74,14 +79,16 @@ class StcGal:
                 binary = hexfile.extract_data()
                 print("%d bytes (Intel HEX)" %len(binary))
                 return binary
-            except ValueError as e:
+            except ValueError as ex:
-                raise IOError("invalid Intel HEX file (%s)" %e)
+                raise IOError("invalid Intel HEX file (%s)" %ex)
         else:
             binary = fileobj.read()
             print("%d bytes (Binary)" %len(binary))
             return binary
 
     def program_mcu(self):
+        """Execute the standard programming flow."""
+
         code_size = self.protocol.model.code
         ee_size = self.protocol.model.eeprom
 
@@ -124,37 +131,38 @@ class StcGal:
         self.protocol.disconnect()
 
     def run(self):
-        try:
+        """Run programmer, main entry point."""
-            self.protocol.connect(autoreset=self.opts.autoreset)
 
-            if self.opts.protocol == "auto":
+        try:
+            self.protocol.connect(autoreset=self.opts.autoreset, resetcmd=self.opts.resetcmd)
+            if isinstance(self.protocol, StcAutoProtocol):
                 if not self.protocol.protocol_name:
                     raise StcProtocolException("cannot detect protocol")
                 base_protocol = self.protocol
                 self.opts.protocol = self.protocol.protocol_name
                 print("Protocol detected: %s" % self.opts.protocol)
                 # recreate self.protocol with proper protocol class
-                self.__init__(self.opts)
+                self.initialize_protocol(self.opts)
             else:
                 base_protocol = None
 
             self.protocol.initialize(base_protocol)
         except KeyboardInterrupt:
-            sys.stdout.flush();
+            sys.stdout.flush()
             print("interrupted")
             return 2
-        except (StcFramingException, StcProtocolException) as e:
+        except (StcFramingException, StcProtocolException) as ex:
-            sys.stdout.flush();
+            sys.stdout.flush()
-            print("Protocol error: %s" % e, file=sys.stderr)
+            print("Protocol error: %s" % ex, file=sys.stderr)
             self.protocol.disconnect()
             return 1
-        except serial.SerialException as e:
+        except serial.SerialException as ex:
-            sys.stdout.flush();
+            sys.stdout.flush()
-            print("Serial port error: %s" % e, file=sys.stderr)
+            print("Serial port error: %s" % ex, file=sys.stderr)
             return 1
-        except IOError as e:
+        except IOError as ex:
-            sys.stdout.flush();
+            sys.stdout.flush()
-            print("I/O error: %s" % e, file=sys.stderr)
+            print("I/O error: %s" % ex, file=sys.stderr)
             return 1
 
         try:
@@ -164,27 +172,27 @@ class StcGal:
             else:
                 self.protocol.disconnect()
                 return 0
-        except NameError as e:
+        except NameError as ex:
-            sys.stdout.flush();
+            sys.stdout.flush()
-            print("Option error: %s" % e, file=sys.stderr)
+            print("Option error: %s" % ex, file=sys.stderr)
             self.protocol.disconnect()
             return 1
-        except (StcFramingException, StcProtocolException) as e:
+        except (StcFramingException, StcProtocolException) as ex:
-            sys.stdout.flush();
+            sys.stdout.flush()
-            print("Protocol error: %s" % e, file=sys.stderr)
+            print("Protocol error: %s" % ex, file=sys.stderr)
             self.protocol.disconnect()
             return 1
         except KeyboardInterrupt:
-            sys.stdout.flush();
+            sys.stdout.flush()
             print("interrupted", file=sys.stderr)
             self.protocol.disconnect()
             return 2
-        except serial.SerialException as e:
+        except serial.SerialException as ex:
-            print("Serial port error: %s" % e, file=sys.stderr)
+            print("Serial port error: %s" % ex, file=sys.stderr)
             return 1
-        except IOError as e:
+        except IOError as ex:
-            sys.stdout.flush();
+            sys.stdout.flush()
-            print("I/O error: %s" % e, file=sys.stderr)
+            print("I/O error: %s" % ex, file=sys.stderr)
             self.protocol.disconnect()
             return 1
 
@@ -192,10 +200,11 @@ class StcGal:
 def cli():
     # check arguments
     parser = argparse.ArgumentParser(formatter_class=argparse.RawDescriptionHelpFormatter,
-                                     description="stcgal %s - an STC MCU ISP flash tool\n(C) 2014-2015 Grigori Goronzy\nhttps://github.com/grigorig/stcgal" %stcgal.__version__)
+                                     description="stcgal %s - an STC MCU ISP flash tool\n(C) 2014-2017 Grigori Goronzy\nhttps://github.com/grigorig/stcgal" %stcgal.__version__)
     parser.add_argument("code_image", help="code segment file to flash (BIN/HEX)", type=argparse.FileType("rb"), nargs='?')
     parser.add_argument("eeprom_image", help="eeprom segment file to flash (BIN/HEX)", type=argparse.FileType("rb"), nargs='?')
     parser.add_argument("-a", "--autoreset", help="cycle power automatically by asserting DTR", action="store_true")
+    parser.add_argument("-r", "--resetcmd",  help="Use this shell command for board power-cycling (instead of DTR assertion)", action="store")
     parser.add_argument("-P", "--protocol", help="protocol version (default: auto)", choices=["stc89", "stc12a", "stc12b", "stc12", "stc15a", "stc15", "usb15", "auto"], default="auto")
     parser.add_argument("-p", "--port", help="serial port device", default="/dev/ttyUSB0")
     parser.add_argument("-b", "--baud", help="transfer baud rate (default: 19200)", type=BaudType(), default=19200)

stcgal/ihex.py

@@ -5,15 +5,20 @@
 import struct
 import codecs
 
-class IHex(object):
+
+class IHex:
+    """Intel HEX parser and writer"""
+
     @classmethod
     def read(cls, lines):
+        """Read Intel HEX data from string or lines"""
         ihex = cls()
 
         segbase = 0
         for line in lines:
             line = line.strip()
-      if not line: continue
+            if not line:
+                continue
 
             t, a, d = ihex.parse_line(line)
             if t == 0x00:
@@ -47,6 +52,7 @@ class IHex(object):
 
     @classmethod
     def read_file(cls, fname):
+        """Read Intel HEX data from file"""
         f = open(fname, "rb")
         ihex = cls.read(f)
         f.close()
@@ -65,6 +71,7 @@ class IHex(object):
         self.row_bytes = row_bytes
 
     def extract_data(self, start=None, end=None):
+        """Extract binary data"""
         if start is None:
             start = 0
 
@@ -74,7 +81,8 @@ class IHex(object):
             for addr, data in self.areas.items():
                 if addr >= start:
                     if len(result) < (addr - start):
-            result[len(result):addr-start] = bytes(addr-start-len(result))
+                        result[len(result):addr - start] = bytes(
+                            addr - start - len(result))
                     result[addr - start:addr - start + len(data)] = data
 
             return bytes(result)
@@ -86,7 +94,8 @@ class IHex(object):
                 if addr >= start and addr < end:
                     data = data[:end - addr]
                     if len(result) < (addr - start):
-            result[len(result):addr-start] = bytes(addr-start-len(result))
+                        result[len(result):addr - start] = bytes(
+                            addr - start - len(result))
                     result[addr - start:addr - start + len(data)] = data
 
             return bytes(result)
@@ -115,10 +124,11 @@ class IHex(object):
         else:
             data = self.areas[area]
             # istart - iend + len(idata) + len(data)
-      self.areas[area] = data[:istart-area] + idata + data[iend-area:]
+            self.areas[area] = data[
+                :istart - area] + idata + data[iend - area:]
 
-  def calc_checksum(self, bytes):
+    def calc_checksum(self, data):
-    total = sum(bytes)
+        total = sum(data)
         return (-total) & 0xFF
 
     def parse_line(self, rawline):
@@ -126,33 +136,31 @@ class IHex(object):
             raise ValueError("Invalid line start character (%r)" % rawline[0])
 
         try:
-      #line = rawline[1:].decode("hex")
             line = codecs.decode(rawline[1:], "hex_codec")
         except:
             raise ValueError("Invalid hex data")
 
-    length, addr, type = struct.unpack(">BHB", line[:4])
+        length, addr, line_type = struct.unpack(">BHB", line[:4])
 
         dataend = length + 4
         data = line[4:dataend]
 
-    #~ print line[dataend:dataend + 2], repr(line)
         cs1 = line[dataend]
         cs2 = self.calc_checksum(line[:dataend])
 
         if cs1 != cs2:
             raise ValueError("Checksums do not match")
 
-    return (type, addr, data)
+        return (line_type, addr, data)
 
-  def make_line(self, type, addr, data):
+    def make_line(self, line_type, addr, data):
-    line = struct.pack(">BHB", len(data), addr, type)
+        line = struct.pack(">BHB", len(data), addr, line_type)
         line += data
         line += chr(self.calc_checksum(line))
-    #~ return ":" + line.encode("hex")
         return ":" + line.encode("hex").upper() + "\r\n"
 
     def write(self):
+        """Write Intel HEX data to string"""
         output = ""
 
         for start, data in sorted(self.areas.items()):
@@ -174,7 +182,8 @@ class IHex(object):
                     addr = t
 
                     if newsegbase != segbase:
-            output += self.make_line(0x02, 0, struct.pack(">H", newsegbase))
+                        output += self.make_line(
+                            0x02, 0, struct.pack(">H", newsegbase))
                         segbase = newsegbase
 
                 elif self.mode == 32:
@@ -182,7 +191,8 @@ class IHex(object):
                     addr = addr & 0xFFFF
 
                     if newsegbase != segbase:
-            output += self.make_line(0x04, 0, struct.pack(">H", newsegbase))
+                        output += self.make_line(
+                            0x04, 0, struct.pack(">H", newsegbase))
                         segbase = newsegbase
 
                 output += self.make_line(0x00, addr, chunk)
@@ -192,14 +202,17 @@ class IHex(object):
 
         if self.start is not None:
             if self.mode == 16:
-        output += self.make_line(0x03, 0, struct.pack(">2H", self.start[0], self.start[1]))
+                output += self.make_line(
+                    0x03, 0, struct.pack(">2H", self.start[0], self.start[1]))
             elif self.mode == 32:
-        output += self.make_line(0x05, 0, struct.pack(">I", self.start))
+                output += self.make_line(
+                    0x05, 0, struct.pack(">I", self.start))
 
         output += self.make_line(0x01, 0, "")
         return output
 
     def write_file(self, fname):
+        """Write Intel HEX data to file"""
         f = open(fname, "w")
         f.write(self.write())
         f.close()

stcgal/models.py

@@ -973,6 +973,46 @@ class MCUModelDatabase:
         MCUModel(name='STC90LE513AD', magic=0xf18d, total=65536, code=53248, eeprom=10240),
         MCUModel(name='STC90LE514AD', magic=0xf18e, total=65536, code=57344, eeprom=6144),
         MCUModel(name='STC90LE516AD', magic=0xf190, total=65536, code=63488, eeprom=0),
+
+        # Warning, these definitions lack a valid eeprom size.
+        MCUModel(name='STC15F04AD', magic=0xd444, total=4096, code=4096, eeprom=0),
+        MCUModel(name='STC15F06AD', magic=0xd446, total=6144, code=6144, eeprom=0),
+        MCUModel(name='STC15F08AD', magic=0xd448, total=8192, code=8192, eeprom=0),
+        MCUModel(name='STC15F10AD', magic=0xd44a, total=10240, code=10240, eeprom=0),
+        MCUModel(name='STC15F12AD', magic=0xd44c, total=12288, code=12288, eeprom=0),
+        MCUModel(name='STC15F04CCP', magic=0xd434, total=4096, code=4096, eeprom=0),
+        MCUModel(name='STC15F06CCP', magic=0xd436, total=6144, code=6144, eeprom=0),
+        MCUModel(name='STC15F08CCP', magic=0xd438, total=8192, code=8192, eeprom=0),
+        MCUModel(name='STC15F10CCP', magic=0xd43a, total=10240, code=10240, eeprom=0),
+        MCUModel(name='STC15F12CCP', magic=0xd43c, total=12288, code=12288, eeprom=0),
+        MCUModel(name='STC15F04', magic=0xd404, total=4096, code=4096, eeprom=0),
+        MCUModel(name='STC15F06', magic=0xd406, total=6144, code=6144, eeprom=0),
+        MCUModel(name='STC15F08', magic=0xd408, total=8192, code=8192, eeprom=0),
+        MCUModel(name='STC15F10', magic=0xd40a, total=10240, code=10240, eeprom=0),
+        MCUModel(name='STC15F12', magic=0xd40c, total=12288, code=12288, eeprom=0),
+        MCUModel(name='IAP15F08AD', magic=0xd458, total=8192, code=8192, eeprom=0),
+        MCUModel(name='IAP15F10AD', magic=0xd45a, total=10240, code=10240, eeprom=0),
+        MCUModel(name='IAP15F12AD', magic=0xd45c, total=12288, code=12288, eeprom=0),
+        MCUModel(name='IAP15F14AD', magic=0xd45e, total=14336, code=14336, eeprom=0),
+        MCUModel(name='STC15L04AD', magic=0xd4c4, total=4096, code=4096, eeprom=0),
+        MCUModel(name='STC15L06AD', magic=0xd4c6, total=6144, code=6144, eeprom=0),
+        MCUModel(name='STC15L08AD', magic=0xd4c8, total=8192, code=8192, eeprom=0),
+        MCUModel(name='STC15L10AD', magic=0xd4ca, total=10240, code=10240, eeprom=0),
+        MCUModel(name='STC15L12AD', magic=0xd4cc, total=12288, code=12288, eeprom=0),
+        MCUModel(name='STC15L04CCP', magic=0xd4b4, total=4096, code=4096, eeprom=0),
+        MCUModel(name='STC15L06CCP', magic=0xd4b6, total=6144, code=6144, eeprom=0),
+        MCUModel(name='STC15L08CCP', magic=0xd4b8, total=8192, code=8192, eeprom=0),
+        MCUModel(name='STC15L10CCP', magic=0xd4ba, total=10240, code=10240, eeprom=0),
+        MCUModel(name='STC15L12CCP', magic=0xd4bc, total=12288, code=12288, eeprom=0),
+        MCUModel(name='STC15L04', magic=0xd484, total=4096, code=4096, eeprom=0),
+        MCUModel(name='STC15L06', magic=0xd486, total=6144, code=6144, eeprom=0),
+        MCUModel(name='STC15L08', magic=0xd488, total=8192, code=8192, eeprom=0),
+        MCUModel(name='STC15L10', magic=0xd48a, total=10240, code=10240, eeprom=0),
+        MCUModel(name='STC15L12', magic=0xd48c, total=12288, code=12288, eeprom=0),
+        MCUModel(name='IAP15L08AD', magic=0xd4d8, total=8192, code=8192, eeprom=0),
+        MCUModel(name='IAP15L10AD', magic=0xd4da, total=10240, code=10240, eeprom=0),
+        MCUModel(name='IAP15L12AD', magic=0xd4dc, total=12288, code=12288, eeprom=0),
+        MCUModel(name='IAP15L14AD', magic=0xd4de, total=14336, code=14336, eeprom=0),
     )
 
     @classmethod
@@ -988,6 +1028,3 @@ class MCUModelDatabase:
         print("  Magic: %02X%02X" % (model.magic >> 8, model.magic & 0xff))
         print("  Code flash: %.1f KB" % (model.code / 1024.0))
         print("  EEPROM flash: %.1f KB" % (model.eeprom / 1024.0))
-
-
-

stcgal/options.py

@@ -21,15 +21,24 @@
 #
 
 import struct
+from abc import ABC
 from stcgal.utils import Utils
 
-class BaseOption:
+class BaseOption(ABC):
+    """Base class for options"""
+
+    def __init__(self):
+        self.options = ()
+        self.msr = None
+
     def print(self):
+        """Print current configuration to standard output"""
         print("Target options:")
         for name, get_func, _ in self.options:
             print("  %s=%s" % (name, get_func()))
 
     def set_option(self, name, value):
+        """Set value of a specific option"""
         for opt, _, set_func in self.options:
             if opt == name:
                 print("Option %s=%s" % (name, value))
@@ -38,12 +47,14 @@ class BaseOption:
         raise ValueError("unknown")
 
     def get_option(self, name):
+        """Get option value for a specific option"""
         for opt, get_func, _ in self.options:
             if opt == name:
                 return get_func(name)
         raise ValueError("unknown")
 
     def get_msr(self):
+        """Get array of model-specific configuration registers"""
         return bytes(self.msr)
 
 
@@ -51,6 +62,7 @@ class Stc89Option(BaseOption):
     """Manipulation STC89 series option byte"""
 
     def __init__(self, msr):
+        super().__init__()
         self.msr = msr
         self.options = (
             ("cpu_6t_enabled", self.get_t6, self.set_t6),
@@ -69,7 +81,7 @@ class Stc89Option(BaseOption):
         return not bool(self.msr & 1)
 
     def set_t6(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr &= 0xfe
         self.msr |= 0x01 if not bool(val) else 0x00
 
@@ -77,7 +89,7 @@ class Stc89Option(BaseOption):
         return not bool(self.msr & 4)
 
     def set_pindetect(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr &= 0xfb
         self.msr |= 0x04 if not bool(val) else 0x00
 
@@ -85,7 +97,7 @@ class Stc89Option(BaseOption):
         return not bool(self.msr & 8)
 
     def set_ee_erase(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr &= 0xf7
         self.msr |= 0x08 if not bool(val) else 0x00
 
@@ -104,7 +116,7 @@ class Stc89Option(BaseOption):
         return bool(self.msr & 32)
 
     def set_ale(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr &= 0xdf
         self.msr |= 0x20 if bool(val) else 0x00
 
@@ -112,7 +124,7 @@ class Stc89Option(BaseOption):
         return bool(self.msr & 64)
 
     def set_xram(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr &= 0xbf
         self.msr |= 0x40 if bool(val) else 0x00
 
@@ -120,7 +132,7 @@ class Stc89Option(BaseOption):
         return not bool(self.msr & 128)
 
     def set_watchdog(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr &= 0x7f
         self.msr |= 0x80 if not bool(val) else 0x00
 
@@ -129,6 +141,7 @@ class Stc12AOption(BaseOption):
     """Manipulate STC12A series option bytes"""
 
     def __init__(self, msr):
+        super().__init__()
         assert len(msr) == 4
         self.msr = bytearray(msr)
 
@@ -150,7 +163,7 @@ class Stc12AOption(BaseOption):
     def set_low_voltage_detect(self, val):
         lvds = {"low": 1, "high": 0}
         if val not in lvds.keys():
-            raise ValueError("must be one of %s" % list(sources.keys()))
+            raise ValueError("must be one of %s" % list(lvds.keys()))
         self.msr[3] &= 0xbf
         self.msr[3] |= lvds[val] << 6
 
@@ -169,7 +182,7 @@ class Stc12AOption(BaseOption):
         return not bool(self.msr[1] & 32)
 
     def set_watchdog(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[1] &= 0xdf
         self.msr[1] |= 0x20 if not val else 0x00
 
@@ -177,7 +190,7 @@ class Stc12AOption(BaseOption):
         return not bool(self.msr[1] & 8)
 
     def set_watchdog_idle(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[1] &= 0xf7
         self.msr[1] |= 0x08 if not val else 0x00
 
@@ -196,7 +209,7 @@ class Stc12AOption(BaseOption):
         return not bool(self.msr[2] & 2)
 
     def set_ee_erase(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[2] &= 0xfd
         self.msr[2] |= 0x02 if not val else 0x00
 
@@ -204,7 +217,7 @@ class Stc12AOption(BaseOption):
         return not bool(self.msr[2] & 1)
 
     def set_pindetect(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[2] &= 0xfe
         self.msr[2] |= 0x01 if not val else 0x00
 
@@ -213,6 +226,7 @@ class Stc12Option(BaseOption):
     """Manipulate STC10/11/12 series option bytes"""
 
     def __init__(self, msr):
+        super().__init__()
         assert len(msr) == 4
         self.msr = bytearray(msr)
 
@@ -235,7 +249,7 @@ class Stc12Option(BaseOption):
         return bool(self.msr[0] & 1)
 
     def set_reset_pin_enabled(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[0] &= 0xfe
         self.msr[0] |= 0x01 if bool(val) else 0x00
 
@@ -243,7 +257,7 @@ class Stc12Option(BaseOption):
         return not bool(self.msr[0] & 64)
 
     def set_low_voltage_detect(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[0] &= 0xbf
         self.msr[0] |= 0x40 if not val else 0x00
 
@@ -295,7 +309,7 @@ class Stc12Option(BaseOption):
         return not bool(self.msr[2] & 32)
 
     def set_watchdog(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[2] &= 0xdf
         self.msr[2] |= 0x20 if not val else 0x00
 
@@ -303,7 +317,7 @@ class Stc12Option(BaseOption):
         return not bool(self.msr[2] & 8)
 
     def set_watchdog_idle(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[2] &= 0xf7
         self.msr[2] |= 0x08 if not val else 0x00
 
@@ -322,7 +336,7 @@ class Stc12Option(BaseOption):
         return not bool(self.msr[3] & 2)
 
     def set_ee_erase(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[3] &= 0xfd
         self.msr[3] |= 0x02 if not val else 0x00
 
@@ -330,13 +344,14 @@ class Stc12Option(BaseOption):
         return not bool(self.msr[3] & 1)
 
     def set_pindetect(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[3] &= 0xfe
         self.msr[3] |= 0x01 if not val else 0x00
 
 
 class Stc15AOption(BaseOption):
     def __init__(self, msr):
+        super().__init__()
         assert len(msr) == 13
         self.msr = bytearray(msr)
 
@@ -359,7 +374,7 @@ class Stc15AOption(BaseOption):
         return bool(self.msr[0] & 16)
 
     def set_reset_pin_enabled(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[0] &= 0xef
         self.msr[0] |= 0x10 if bool(val) else 0x00
 
@@ -367,7 +382,7 @@ class Stc15AOption(BaseOption):
         return not bool(self.msr[2] & 32)
 
     def set_watchdog(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[2] &= 0xdf
         self.msr[2] |= 0x20 if not val else 0x00
 
@@ -375,7 +390,7 @@ class Stc15AOption(BaseOption):
         return not bool(self.msr[2] & 8)
 
     def set_watchdog_idle(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[2] &= 0xf7
         self.msr[2] |= 0x08 if not val else 0x00
 
@@ -394,7 +409,7 @@ class Stc15AOption(BaseOption):
         return bool(self.msr[1] & 64)
 
     def set_lvrs(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[1] &= 0xbf
         self.msr[1] |= 0x40 if val else 0x00
 
@@ -402,7 +417,7 @@ class Stc15AOption(BaseOption):
         return bool(self.msr[1] & 128)
 
     def set_eeprom_lvd(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[1] &= 0x7f
         self.msr[1] |= 0x80 if val else 0x00
 
@@ -420,7 +435,7 @@ class Stc15AOption(BaseOption):
         return not bool(self.msr[12] & 2)
 
     def set_ee_erase(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[12] &= 0xfd
         self.msr[12] |= 0x02 if not val else 0x00
 
@@ -428,13 +443,14 @@ class Stc15AOption(BaseOption):
         return not bool(self.msr[12] & 1)
 
     def set_pindetect(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[12] &= 0xfe
         self.msr[12] |= 0x01 if not val else 0x00
 
 
 class Stc15Option(BaseOption):
     def __init__(self, msr):
+        super().__init__()
         assert len(msr) >= 4
         self.msr = bytearray(msr)
 
@@ -463,7 +479,7 @@ class Stc15Option(BaseOption):
         return not bool(self.msr[2] & 16)
 
     def set_reset_pin_enabled(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[2] &= 0xef
         self.msr[2] |= 0x10 if not bool(val) else 0x00
 
@@ -493,7 +509,7 @@ class Stc15Option(BaseOption):
         return not bool(self.msr[0] & 32)
 
     def set_watchdog(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[0] &= 0xdf
         self.msr[0] |= 0x20 if not val else 0x00
 
@@ -501,7 +517,7 @@ class Stc15Option(BaseOption):
         return not bool(self.msr[0] & 8)
 
     def set_watchdog_idle(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[0] &= 0xf7
         self.msr[0] |= 0x08 if not val else 0x00
 
@@ -520,7 +536,7 @@ class Stc15Option(BaseOption):
         return not bool(self.msr[1] & 64)
 
     def set_lvrs(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[1] &= 0xbf
         self.msr[1] |= 0x40 if not val else 0x00
 
@@ -528,7 +544,7 @@ class Stc15Option(BaseOption):
         return bool(self.msr[1] & 128)
 
     def set_eeprom_lvd(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[1] &= 0x7f
         self.msr[1] |= 0x80 if val else 0x00
 
@@ -546,7 +562,7 @@ class Stc15Option(BaseOption):
         return bool(self.msr[3] & 2)
 
     def set_ee_erase(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[3] &= 0xfd
         self.msr[3] |= 0x02 if val else 0x00
 
@@ -554,7 +570,7 @@ class Stc15Option(BaseOption):
         return not bool(self.msr[3] & 1)
 
     def set_pindetect(self, val):
-        val = Utils.to_bool(val);
+        val = Utils.to_bool(val)
         self.msr[3] &= 0xfe
         self.msr[3] |= 0x01 if not val else 0x00
 

stcgal/protocols.py

@@ -21,13 +21,20 @@
 #
 
 import serial
-import sys, os, time, struct, re, errno
+import sys
+import os
+import time
+import struct
+import re
+import errno
 import argparse
 import collections
 from stcgal.models import MCUModelDatabase
 from stcgal.utils import Utils
-from stcgal.options import *
+from stcgal.options import Stc89Option, Stc12Option, Stc12AOption, Stc15Option, Stc15AOption
+from abc import ABC, abstractmethod
 import functools
+import tqdm
 
 try:
     import usb.core, usb.util
@@ -46,7 +53,7 @@ class StcProtocolException(Exception):
     pass
 
 
-class StcBaseProtocol:
+class StcBaseProtocol(ABC):
     """Basic functionality for STC BSL protocols"""
 
     """magic word that starts a packet"""
@@ -77,6 +84,22 @@ class StcBaseProtocol:
         self.debug = False
         self.status_packet = None
         self.protocol_name = None
+        self.bar = None
+        self.progress_cb = self.progress_bar_cb
+
+    def progress_text_cb(self, current, written, maximum):
+        print(current, written, maximum)
+
+    def progress_bar_cb(self, current, written, maximum):
+        if not self.bar:
+            self.bar = tqdm.tqdm(
+                total = maximum,
+                unit = " Bytes",
+                desc = "Writing flash"
+                )
+        self.bar.update(written)
+        if current == maximum:
+            self.bar.close()
 
     def dump_packet(self, data, receive=True):
         if self.debug:
@@ -103,6 +126,10 @@ class StcBaseProtocol:
 
         return packet[5:-1]
 
+    @abstractmethod
+    def write_packet(self, packet_data):
+        pass
+
     def read_packet(self):
         """Read and check packet from MCU.
 
@@ -142,7 +169,7 @@ class StcBaseProtocol:
         packet += self.read_bytes_safe(packet_len - 3)
 
         # verify checksum and extract payload
-        payload = self.extract_payload(packet);
+        payload = self.extract_payload(packet)
 
         self.dump_packet(packet, receive=True)
 
@@ -192,20 +219,6 @@ class StcBaseProtocol:
             mcu_name += "E" if self.status_packet[17] < 0x70 else "W"
             self.model = self.model._replace(name = mcu_name)
 
-        protocol_database = [("stc89", "STC(89|90)(C|LE)\d"),
-                             ("stc12a", "STC12(C|LE)\d052"),
-                             ("stc12b", "STC12(C|LE)(52|56)"),
-                             ("stc12", "(STC|IAP)(10|11|12)\D"),
-                             ("stc15a", "(STC|IAP)15[FL][01]0\d(E|EA|)$"),
-                             ("stc15", "(STC|IAP|IRC)15\D")]
-
-        for protocol_name, pattern in protocol_database:
-            if re.match(pattern, self.model.name):
-                self.protocol_name = protocol_name
-                break
-        else:
-            self.protocol_name = None
-
     def get_status_packet(self):
         """Read and decode status packet"""
 
@@ -241,7 +254,22 @@ class StcBaseProtocol:
     def set_option(self, name, value):
         self.options.set_option(name, value)
 
-    def connect(self, autoreset=False):
+    def reset_device(self, resetcmd=False):
+        if not resetcmd:
+            print("Cycling power: ", end="")
+            sys.stdout.flush()
+            self.ser.setDTR(True)
+            time.sleep(0.5)
+            self.ser.setDTR(False)
+            print("done")
+        else:
+            print("Cycling power via shell cmd: " + resetcmd)
+            os.system(resetcmd)
+
+        print("Waiting for MCU: ", end="")
+        sys.stdout.flush()
+
+    def connect(self, autoreset=False, resetcmd=False):
         """Connect to MCU and initialize communication.
 
         Set up serial port, send sync sequence and get part info.
@@ -260,14 +288,7 @@ class StcBaseProtocol:
         self.ser.flushInput()
 
         if autoreset:
-            print("Cycling power: ", end="")
+            self.reset_device(resetcmd)
-            sys.stdout.flush()
-            self.ser.setDTR(True)
-            time.sleep(0.5)
-            self.ser.setDTR(False)
-            print("done")
-            print("Waiting for MCU: ", end="")
-            sys.stdout.flush()
         else:
             print("Waiting for MCU, please cycle power: ", end="")
             sys.stdout.flush()
@@ -279,6 +300,8 @@ class StcBaseProtocol:
             try:
                 self.pulse()
                 self.status_packet = self.get_status_packet()
+                if len(self.status_packet) < 23:
+                    raise StcProtocolException("status packet too short")
             except (StcFramingException, serial.SerialTimeoutException): pass
         print("done")
 
@@ -288,7 +311,21 @@ class StcBaseProtocol:
 
         self.initialize_model()
 
+    @abstractmethod
+    def initialize_status(self, status_packet):
+        """Initialize internal state from status packet"""
+        pass
+
+    @abstractmethod
+    def initialize_options(self, status_packet):
+        """Initialize options from status packet"""
+        pass
+
     def initialize(self, base_protocol=None):
+        """
+        Initialize from another instance. This is an alternative for calling
+        connect() and is used by protocol autodetection.
+        """
         if base_protocol:
             self.ser = base_protocol.ser
             self.ser.parity = self.PARITY
@@ -316,6 +353,39 @@ class StcBaseProtocol:
         print("Disconnected!")
 
 
+class StcAutoProtocol(StcBaseProtocol):
+    """
+    Protocol handler for autodetection of protocols. Does not implement full
+    functionality for any device class.
+    """
+
+    def initialize_model(self):
+        super().initialize_model()
+
+        protocol_database = [("stc89", r"STC(89|90)(C|LE)\d"),
+                             ("stc12a", r"STC12(C|LE)\d052"),
+                             ("stc12b", r"STC12(C|LE)(52|56)"),
+                             ("stc12", r"(STC|IAP)(10|11|12)\D"),
+                             ("stc15a", r"(STC|IAP)15[FL][01]0\d(E|EA|)$"),
+                             ("stc15", r"(STC|IAP|IRC)15\D")]
+
+        for protocol_name, pattern in protocol_database:
+            if re.match(pattern, self.model.name):
+                self.protocol_name = protocol_name
+                break
+        else:
+            self.protocol_name = None
+
+    def initialize_options(self, status_packet):
+        raise NotImplementedError
+
+    def initialize_status(self, status_packet):
+        raise NotImplementedError
+
+    def write_packet(self, packet_data):
+        raise NotImplementedError
+
+
 class Stc89Protocol(StcBaseProtocol):
     """Protocol handler for STC 89/90 series"""
 
@@ -376,6 +446,9 @@ class Stc89Protocol(StcBaseProtocol):
     def initialize_options(self, status_packet):
         """Initialize options"""
 
+        if len(status_packet) < 20:
+            raise StcProtocolException("invalid options in status packet")
+
         self.options = Stc89Option(status_packet[19])
         self.options.print()
 
@@ -497,8 +570,6 @@ class Stc89Protocol(StcBaseProtocol):
         as the block size (depends on MCU's RAM size).
         """
 
-        print("Writing %d bytes: " % len(data), end="")
-        sys.stdout.flush()
         for i in range(0, len(data), self.PROGRAM_BLOCKSIZE):
             packet = bytes(3)
             packet += struct.pack(">H", i)
@@ -508,13 +579,12 @@ class Stc89Protocol(StcBaseProtocol):
             csum = sum(packet[7:]) & 0xff
             self.write_packet(packet)
             response = self.read_packet()
-            if response[0] != 0x80:
+            if len(response) < 1 or response[0] != 0x80:
                 raise StcProtocolException("incorrect magic in write packet")
-            elif response[1] != csum:
+            elif len(response) < 2 or response[1] != csum:
                 raise StcProtocolException("verification checksum mismatch")
-            print(".", end="")
+            self.progress_cb(i, self.PROGRAM_BLOCKSIZE, len(data))
-            sys.stdout.flush()
+        self.progress_cb(len(data), self.PROGRAM_BLOCKSIZE, len(data))
-        print(" done")
 
     def program_options(self):
         """Program option byte into flash"""
@@ -612,6 +682,9 @@ class Stc12AProtocol(Stc12AOptionsMixIn, Stc89Protocol):
     def initialize_options(self, status_packet):
         """Initialize options"""
 
+        if len(status_packet) < 31:
+            raise StcProtocolException("invalid options in status packet")
+
         # create option state
         self.options = Stc12AOption(status_packet[23:26] + status_packet[29:30])
         self.options.print()
@@ -801,6 +874,9 @@ class Stc12BaseProtocol(StcBaseProtocol):
     def initialize_options(self, status_packet):
         """Initialize options"""
 
+        if len(status_packet) < 29:
+            raise StcProtocolException("invalid options in status packet")
+
         # create option state
         self.options = Stc12Option(status_packet[23:26] + status_packet[27:28])
         self.options.print()
@@ -878,24 +954,18 @@ class Stc12BaseProtocol(StcBaseProtocol):
         as the block size (depends on MCU's RAM size).
         """
 
-        print("Writing %d bytes: " % len(data), end="")
-        sys.stdout.flush()
         for i in range(0, len(data), self.PROGRAM_BLOCKSIZE):
             packet = bytes(3)
             packet += struct.pack(">H", i)
             packet += struct.pack(">H", self.PROGRAM_BLOCKSIZE)
             packet += data[i:i+self.PROGRAM_BLOCKSIZE]
             while len(packet) < self.PROGRAM_BLOCKSIZE + 7: packet += b"\x00"
-            csum = sum(packet[7:]) & 0xff
             self.write_packet(packet)
             response = self.read_packet()
             if response[0] != 0x00:
                 raise StcProtocolException("incorrect magic in write packet")
-            elif response[1] != csum:
+            self.progress_cb(i, self.PROGRAM_BLOCKSIZE, len(data))
-                raise StcProtocolException("verification checksum mismatch")
+        self.progress_cb(len(data), self.PROGRAM_BLOCKSIZE, len(data))
-            print(".", end="")
-            sys.stdout.flush()
-        print(" done")
 
         print("Finishing write: ", end="")
         sys.stdout.flush()
@@ -938,6 +1008,9 @@ class Stc15AProtocol(Stc12Protocol):
     def initialize_options(self, status_packet):
         """Initialize options"""
 
+        if len(status_packet) < 37:
+            raise StcProtocolException("invalid options in status packet")
+
         # create option state
         self.options = Stc15AOption(status_packet[23:36])
         self.options.print()
@@ -1021,7 +1094,8 @@ class Stc15AProtocol(Stc12Protocol):
         """
 
         user_speed = self.trim_frequency
-        if user_speed <= 0: user_speed = self.mcu_clock_hz
+        if user_speed <= 0:
+            user_speed = self.mcu_clock_hz
         program_speed = 22118400
 
         user_count = int(self.freq_counter * (user_speed / self.mcu_clock_hz))
@@ -1049,15 +1123,19 @@ class Stc15AProtocol(Stc12Protocol):
         self.write_packet(packet)
         self.pulse(timeout=1.0)
         response = self.read_packet()
-        if response[0] != 0x65:
+        if len(response) < 36 or response[0] != 0x65:
             raise StcProtocolException("incorrect magic in handshake packet")
 
         # determine programming speed trim value
         target_trim_a, target_count_a = struct.unpack(">HH", response[28:32])
         target_trim_b, target_count_b = struct.unpack(">HH", response[32:36])
+        if target_count_a == target_count_b:
+            raise StcProtocolException("frequency trimming failed")
         m = (target_trim_b - target_trim_a) / (target_count_b - target_count_a)
         n = target_trim_a - m * target_count_a
         program_trim = round(m * program_count + n)
+        if program_trim > 65535 or program_trim < 0:
+            raise StcProtocolException("frequency trimming failed")
 
         # determine trim trials for second round
         trim_a, count_a = struct.unpack(">HH", response[12:16])
@@ -1076,10 +1154,14 @@ class Stc15AProtocol(Stc12Protocol):
             target_count_a = count_a
             target_count_b = count_b
         # linear interpolate to find range to try next
+        if target_count_a == target_count_b:
+            raise StcProtocolException("frequency trimming failed")
         m = (target_trim_b - target_trim_a) / (target_count_b - target_count_a)
         n = target_trim_a - m * target_count_a
         target_trim = round(m * user_count + n)
         target_trim_start = min(max(target_trim - 5, target_trim_a), target_trim_b)
+        if target_trim_start + 11 > 65535 or target_trim_start < 0:
+            raise StcProtocolException("frequency trimming failed")
 
         # trim challenge-response, second round
         packet = bytes([0x65])
@@ -1091,7 +1173,7 @@ class Stc15AProtocol(Stc12Protocol):
         self.write_packet(packet)
         self.pulse(timeout=1.0)
         response = self.read_packet()
-        if response[0] != 0x65:
+        if len(response) < 56 or response[0] != 0x65:
             raise StcProtocolException("incorrect magic in handshake packet")
 
         # determine best trim value
@@ -1150,7 +1232,11 @@ class Stc15Protocol(Stc15AProtocol):
     def initialize_options(self, status_packet):
         """Initialize options"""
 
+        if len(status_packet) < 14:
+            raise StcProtocolException("invalid options in status packet")
+
         # create option state
+        # XXX: check how option bytes are concatenated here
         self.options = Stc15Option(status_packet[5:8] + status_packet[12:13] + status_packet[37:38])
         self.options.print()
 
@@ -1179,8 +1265,7 @@ class Stc15Protocol(Stc15AProtocol):
         bl_version, bl_stepping = struct.unpack("BB", packet[17:19])
         bl_minor = packet[22] & 0x0f
         self.mcu_bsl_version = "%d.%d.%d%s" % (bl_version >> 4, bl_version & 0x0f,
-                                           bl_minor,
+                                               bl_minor, chr(bl_stepping))
-                                           chr(bl_stepping))
         self.bsl_version = bl_version
 
     def print_mcu_info(self):
@@ -1196,6 +1281,8 @@ class Stc15Protocol(Stc15AProtocol):
         calib_data = response[2:]
         challenge_data = packet[2:]
         calib_len = response[1]
+        if len(calib_data) < 2 * calib_len:
+            raise StcProtocolException("range calibration data missing")
 
         for i in range(calib_len - 1):
             count_a, count_b = struct.unpack(">HH", calib_data[2*i:2*i+4])
@@ -1205,6 +1292,8 @@ class Stc15Protocol(Stc15AProtocol):
                 m = (trim_b - trim_a) / (count_b - count_a)
                 n = trim_a - m * count_a
                 target_trim = round(m * target_count + n)
+                if target_trim > 65536 or target_trim < 0:
+                    raise StcProtocolException("frequency trimming failed")
                 return (target_trim, trim_range)
 
         return None
@@ -1216,6 +1305,8 @@ class Stc15Protocol(Stc15AProtocol):
         calib_data = response[2:]
         challenge_data = packet[2:]
         calib_len = response[1]
+        if len(calib_data) < 2 * calib_len:
+            raise StcProtocolException("trim calibration data missing")
 
         best = None
         best_count = sys.maxsize
@@ -1226,6 +1317,9 @@ class Stc15Protocol(Stc15AProtocol):
                 best_count = abs(count - target_count)
                 best = (trim_adj, trim_range), count
 
+        if not best:
+            raise StcProtocolException("frequency trimming failed")
+
         return best
 
     def calibrate(self):
@@ -1255,7 +1349,7 @@ class Stc15Protocol(Stc15AProtocol):
         self.write_packet(packet)
         self.pulse(b"\xfe", timeout=1.0)
         response = self.read_packet()
-        if response[0] != 0x00:
+        if len(response) < 2 or response[0] != 0x00:
             raise StcProtocolException("incorrect magic in handshake packet")
 
         # select ranges and trim values
@@ -1274,7 +1368,7 @@ class Stc15Protocol(Stc15AProtocol):
         self.write_packet(packet)
         self.pulse(b"\xfe", timeout=1.0)
         response = self.read_packet()
-        if response[0] != 0x00:
+        if len(response) < 2 or response[0] != 0x00:
             raise StcProtocolException("incorrect magic in handshake packet")
 
         # select final values
@@ -1295,12 +1389,12 @@ class Stc15Protocol(Stc15AProtocol):
         # This is a bit of a hack, but it works.
         bauds = self.baud_transfer if (self.mcu_magic >> 8) == 0xf2 else self.baud_transfer * 4
         packet += struct.pack(">H", int(65535 - program_speed / bauds))
-        packet += struct.pack(">H", int(65535 - (program_speed / bauds) * 1.5))
+        packet += bytes(user_trim)
         iap_wait = self.get_iap_delay(program_speed)
         packet += bytes([iap_wait])
         self.write_packet(packet)
         response = self.read_packet()
-        if response[0] != 0x01:
+        if len(response) < 1 or response[0] != 0x01:
             raise StcProtocolException("incorrect magic in handshake packet")
         time.sleep(0.2)
         self.ser.baudrate = self.baud_transfer
@@ -1317,7 +1411,7 @@ class Stc15Protocol(Stc15AProtocol):
         packet += bytes([0x00, 0x00, iap_wait])
         self.write_packet(packet)
         response = self.read_packet()
-        if response[0] != 0x01:
+        if len(response) < 1 or response[0] != 0x01:
             raise StcProtocolException("incorrect magic in handshake packet")
         time.sleep(0.2)
         self.ser.baudrate = self.baud_transfer
@@ -1343,9 +1437,9 @@ class Stc15Protocol(Stc15AProtocol):
             packet += bytes([0x00, 0x00, 0x5a, 0xa5])
         self.write_packet(packet)
         response = self.read_packet()
-        if response[0] == 0x0f:
+        if len(response) == 1 and response[0] == 0x0f:
             raise StcProtocolException("MCU is locked")
-        if response[0] != 0x05:
+        if len(response) < 1 or response[0] != 0x05:
             raise StcProtocolException("incorrect magic in handshake packet")
 
         print("done")
@@ -1366,18 +1460,20 @@ class Stc15Protocol(Stc15AProtocol):
             packet += bytes([0x00, 0x5a, 0xa5])
         self.write_packet(packet)
         response = self.read_packet()
-        if response[0] != 0x03:
+        if len(response) < 1 or response[0] != 0x03:
             raise StcProtocolException("incorrect magic in handshake packet")
         print("done")
 
         if len(response) >= 8:
             self.uid = response[1:8]
 
+        # we should have a UID at this point
+        if not self.uid:
+            raise StcProtocolException("UID is missing")
+
     def program_flash(self, data):
         """Program the MCU's flash memory."""
 
-        print("Writing %d bytes: " % len(data), end="")
-        sys.stdout.flush()
         for i in range(0, len(data), self.PROGRAM_BLOCKSIZE):
             packet = bytes([0x22]) if i == 0 else bytes([0x02])
             packet += struct.pack(">H", i)
@@ -1387,11 +1483,10 @@ class Stc15Protocol(Stc15AProtocol):
             while len(packet) < self.PROGRAM_BLOCKSIZE + 3: packet += b"\x00"
             self.write_packet(packet)
             response = self.read_packet()
-            if response[0] != 0x02 or response[1] != 0x54:
+            if len(response) < 2 or response[0] != 0x02 or response[1] != 0x54:
                 raise StcProtocolException("incorrect magic in write packet")
-            print(".", end="")
+            self.progress_cb(i, self.PROGRAM_BLOCKSIZE, len(data))
-            sys.stdout.flush()
+        self.progress_cb(len(data), self.PROGRAM_BLOCKSIZE, len(data))
-        print(" done")
 
         # BSL 7.2+ needs a write finish packet according to dumps
         if self.bsl_version >= 0x72:
@@ -1400,7 +1495,7 @@ class Stc15Protocol(Stc15AProtocol):
             packet = bytes([0x07, 0x00, 0x00, 0x5a, 0xa5])
             self.write_packet(packet)
             response = self.read_packet()
-            if response[0] != 0x07 or response[1] != 0x54:
+            if len(response) < 2 or response[0] != 0x07 or response[1] != 0x54:
                 raise StcProtocolException("incorrect magic in finish packet")
             print("done")
 
@@ -1439,7 +1534,7 @@ class Stc15Protocol(Stc15AProtocol):
         packet += self.build_options()
         self.write_packet(packet)
         response = self.read_packet()
-        if response[0] != 0x04 or response[1] != 0x54:
+        if len(response) < 2 or response[0] != 0x04 or response[1] != 0x54:
             raise StcProtocolException("incorrect magic in option packet")
         print("done")
 
@@ -1463,8 +1558,9 @@ class StcUsb15Protocol(Stc15Protocol):
 
     def dump_packet(self, data, request=0, value=0, index=0, receive=True):
         if self.debug:
-            print("%s bRequest=%02X wValue=%04X wIndex=%04X data: %s" % (("<-" if receive else "->"),
+            print("%s bRequest=%02X wValue=%04X wIndex=%04X data: %s" %
-                  request, value, index, Utils.hexstr(data, " ")), file=sys.stderr)
+                  (("<-" if receive else "->"), request, value, index,
+                   Utils.hexstr(data, " ")), file=sys.stderr)
 
     def read_packet(self):
         """Read a packet from the MCU"""
@@ -1504,15 +1600,16 @@ class StcUsb15Protocol(Stc15Protocol):
 
         self.dump_packet(chunks, request, value, index, receive=False)
         host2dev = usb.util.CTRL_TYPE_VENDOR | usb.util.CTRL_RECIPIENT_DEVICE | usb.util.CTRL_OUT
-        self.dev.ctrl_transfer(host2dev, request, value, index, chunks);
+        self.dev.ctrl_transfer(host2dev, request, value, index, chunks)
 
-    def connect(self, autoreset=False):
+    def connect(self, autoreset=False, resetcmd=False):
         """Connect to USB device and read info packet"""
 
         # USB support is optional. Provide an error if pyusb is not available.
-        if _usb_available == False:
+        if not _usb_available:
-            raise StcProtocolException("USB support not available. "
+            raise StcProtocolException(
-                + "pyusb is not installed or not working correctly.")
+                "USB support not available. " +
+                "pyusb is not installed or not working correctly.")
 
         print("Waiting for MCU, please cycle power: ", end="")
         sys.stdout.flush()
@@ -1572,8 +1669,6 @@ class StcUsb15Protocol(Stc15Protocol):
     def program_flash(self, data):
         """Program the MCU's flash memory."""
 
-        print("Writing %d bytes: " % len(data), end="")
-        sys.stdout.flush()
         for i in range(0, len(data), self.PROGRAM_BLOCKSIZE):
             packet = data[i:i+self.PROGRAM_BLOCKSIZE]
             while len(packet) < self.PROGRAM_BLOCKSIZE: packet += b"\x00"
@@ -1583,9 +1678,8 @@ class StcUsb15Protocol(Stc15Protocol):
             response = self.read_packet()
             if response[0] != 0x02 or response[1] != 0x54:
                 raise StcProtocolException("incorrect magic in write packet")
-            print(".", end="")
+            self.progress_cb(i, self.PROGRAM_BLOCKSIZE, len(data))
-            sys.stdout.flush()
+        self.progress_cb(len(data), self.PROGRAM_BLOCKSIZE, len(data))
-        print(" done")
 
     def program_options(self):
         print("Setting options: ", end="")

stcgal/utils.py

@@ -19,31 +19,39 @@
 # SOFTWARE.
 #
 
-import serial
 import argparse
+import serial
 
 class Utils:
+    """Common utility functions"""
+
     @classmethod
-    def to_bool(self, val):
+    def to_bool(cls, val):
         """make sensible boolean from string or other type value"""
 
-        if isinstance(val, bool): return val
+        if not val:
-        if isinstance(val, int): return bool(val)
+            return False
-        if len(val) == 0: return False
+        if isinstance(val, bool):
+            return val
+        elif isinstance(val, int):
+            return bool(val)
+        else:
             return True if val[0].lower() == "t" or val[0] == "1" else False
 
     @classmethod
-    def to_int(self, val):
+    def to_int(cls, val):
         """make int from any value, nice error message if not possible"""
 
-        try: return int(val, 0)
+        try:
-        except: raise ValueError("invalid integer")
+            return int(val, 0)
+        except:
+            raise ValueError("invalid integer")
 
     @classmethod
-    def hexstr(self, bytestr, sep=""):
+    def hexstr(cls, bytestr, sep=""):
         """make formatted hex string output from byte sequence"""
 
-        return sep.join(["%02X" % x for x in bytestr])
+        return sep.join(["%02X" % x for x in bytes(bytestr)])
 
 
 class BaudType:
@@ -55,5 +63,5 @@ class BaudType:
             raise argparse.ArgumentTypeError("illegal baudrate")
         return baud
 
-    def __repr__(self): return "baudrate"
+    def __repr__(self):
-
+        return "baudrate"

tests/iap15f2k61s2.yml

@@ -0,0 +1,19 @@
+name: IAP15F2K61S2 programming test
+protocol: stc15
+code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
+responses:
+    - [0x50, 0x87, 0xD3, 0x75, 0x9C, 0xF5, 0x3B, 0x17, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x09, 0x81, 0x00, 0x00, 0x71, 0x53, 0x00, 0xF4, 0x49, 0x04, 0x06, 0x58, 0x9C, 0x02, 0x0E, 0x14, 0x17, 0x19, 0x19, 0x00, 0xF4, 0xF4, 0x04, 0xD2]
+    - [0x00, 0x0B, 0x03, 0x37, 0x04, 0x9A, 0x06, 0x02, 0x06, 0x6B, 0x09, 0x27, 0x0B, 0xE8, 0x0D, 0x0A, 0x12, 0x5A, 0x17, 0x9B, 0x14, 0x8F, 0x1C, 0x96, 0x00, 0x00]
+    - [0x00, 0x0C, 0x09, 0x04, 0x09, 0x09, 0x09, 0x0E, 0x09, 0x0E, 0x09, 0x18, 0x09, 0x1D, 0x12, 0x00, 0x12, 0x0F, 0x12, 0x19, 0x12, 0x23, 0x12, 0x2D, 0x12, 0x37]
+    - [0x01]
+    - [0x05]
+    - [0x03, 0x0D, 0x00, 0x00, 0x21, 0x02, 0x26, 0x32]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x04, 0x54]

tests/stc12c2052ad.yml

@@ -0,0 +1,19 @@
+name: STC12C2052AD programming test
+protocol: stc12a
+code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
+responses:
+    - [0x00, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEC, 0x04, 0xEB, 0x04, 0xEB, 0x58, 0x44, 0x00, 0xF2, 0x12, 0x83, 0xFD, 0xF7, 0xF7, 0xFF, 0xFF, 0xFF, 0xBF, 0xFF, 0xFD, 0xF7, 0xF7, 0xFF]
+    - [0x8F, 0xC0, 0x79, 0x3F, 0xFE, 0x28, 0x85]
+    - [0x8E, 0xC0, 0x79, 0x3F, 0xFE, 0x28]
+    - [0x80]
+    - [0x80]
+    - [0x80]
+    - [0x80]
+    - [0x80]
+    - [0x80, 0x66]
+    - [0x80, 0x80]
+    - [0x80, 0x80]
+    - [0x80, 0x80]
+    - [0x80, 0xEE]
+    - [0x10, 0xC0, 0x16, 0xF7, 0xFF, 0xBF, 0x03, 0xFF, 0x58, 0x44, 0xFD, 0xF7, 0xF7, 0xFF, 0xFF, 0xFF, 0xBF, 0xFF, 0xFD, 0xF7, 0xF7, 0xFF]
+    - [0x80]

tests/stc12c5a60s2.yml

@@ -0,0 +1,15 @@
+name: STC12C5A60S2 programming test
+protocol: stc12
+code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
+responses:
+    - [0x50, 0x04, 0xBD, 0x04, 0xBC, 0x04, 0xBC, 0x04, 0xBD, 0x04, 0xBC, 0x04, 0xBC, 0x04, 0xBC, 0x04, 0xBC, 0x62, 0x49, 0x00, 0xD1, 0x7E, 0x8C, 0xFF, 0x7F, 0xF7, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x03, 0x00, 0xB0, 0x02, 0x2E, 0x6B, 0x00, 0xCD, 0x80, 0x00, 0x00]
+    - [0x8F]
+    - [0x8F, 0xC0, 0x7E, 0x3F, 0xFE, 0xA0, 0x83, 0x04]
+    - [0x84, 0xC0, 0x7E, 0x3F, 0xFE, 0xA0, 0x04]
+    - [0x00]
+    - [0x00, 0x03]
+    - [0x00, 0x00]
+    - [0x00, 0x00]
+    - [0x00, 0x00]
+    - [0x8D]
+    - [0x50, 0xFF, 0x7F, 0xF7, 0xFF, 0xFF, 0x03, 0xFF, 0x62, 0x49, 0xFF, 0x7F, 0xF7, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x00, 0x03, 0x00, 0xB0, 0x02, 0x2E, 0x6B, 0x00, 0xCD, 0x80, 0x00, 0x00]

tests/stc15f104e.yml

@@ -0,0 +1,20 @@
+name: STC15F104E programming test
+protocol: stc15a
+code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
+responses:
+    - [0x50, 0x02, 0xB0, 0x02, 0xB0, 0x02, 0xAF, 0x02, 0xB0, 0x02, 0xE6, 0x02, 0xE7, 0x00, 0x00, 0x00, 0x00, 0x67, 0x51, 0xFF, 0xF2, 0x94, 0x8C, 0xEF, 0x3B, 0xF5, 0x58, 0x34, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x58, 0x50, 0x0C, 0x94, 0x21, 0xFF, 0x29]
+    - [0x8f]
+    - [0x65, 0x58, 0x50, 0x0C, 0x95, 0x21, 0xFF, 0x2B, 0xFF, 0xFF, 0x06, 0x06, 0x58, 0x00, 0x02, 0x00, 0x58, 0x80, 0x02, 0x00, 0x58, 0x80, 0x02, 0x00, 0x58, 0xFF, 0x02, 0x00, 0x58, 0x00, 0x02, 0x00, 0x58, 0x80, 0x02, 0x00]
+    - [0x65, 0x58, 0x50, 0x0C, 0x95, 0x21, 0xFF, 0x2B, 0xFF, 0xFF, 0x06, 0x0B, 0x58, 0x24, 0x02, 0x00, 0x58, 0x25, 0x02, 0x00, 0x58, 0x26, 0x02, 0x00, 0x58, 0x27, 0x02, 0x00, 0x58, 0x28, 0x02, 0x00, 0x58, 0x29, 0x02, 0x00, 0x58, 0x2A, 0x02, 0x00, 0x58, 0x2B, 0x02, 0x00, 0x58, 0x2C, 0x02, 0x00, 0x58, 0x2D, 0x02, 0x00, 0x58, 0x2E, 0x02, 0x00]
+    - [0x01]
+    - [0x05]
+    - [0x03, 0x0C, 0x00, 0x00, 0x17, 0x01, 0xA0, 0xE0]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x04, 0x54]

tests/stc15l104w.yml

@@ -0,0 +1,19 @@
+name: STC15L104W programming test
+protocol: stc15
+code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
+responses:
+    - [0x50, 0x66, 0x3C, 0x93, 0xBA, 0xF7, 0xBB, 0x9F, 0x00, 0x5B, 0x68, 0x00, 0xFD, 0x00, 0x00, 0x00, 0x00, 0x71, 0x51, 0x03, 0xF2, 0xD4, 0x04, 0x06, 0x58, 0xBA, 0x02, 0x2A, 0x31, 0x32, 0x38, 0x30, 0x80, 0x14, 0x10, 0x04, 0xD9]
+    - [0x00, 0x0B, 0x03, 0x0A, 0x04, 0x4F, 0x05, 0x9E, 0x06, 0x20, 0x08, 0xB9, 0x0B, 0x5C, 0x0C, 0x6A, 0x11, 0x7E, 0x16, 0x79, 0x13, 0x77, 0x1A, 0xB1, 0x00, 0x00]
+    - [0x00, 0x0C, 0x04, 0xD6, 0x04, 0xDB, 0x04, 0xE0, 0x04, 0xE0, 0x04, 0xE0, 0x04, 0xE5, 0x11, 0xE2, 0x11, 0xF1, 0x11, 0xFB, 0x12, 0x05, 0x12, 0x0A, 0x12, 0x19]
+    - [0x01]
+    - [0x05]
+    - [0x03, 0x0C, 0x00, 0x00, 0x17, 0x01, 0xA0, 0xE0]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x04, 0x54]

tests/stc15w4k56s4.yml

@@ -0,0 +1,20 @@
+name: STC15W4K56S4 programming test
+protocol: stc15
+code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
+responses:
+    - [0x50, 0x8D, 0xFF, 0x73, 0x96, 0xF5, 0x7B, 0x9F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x27, 0xED, 0x00, 0x00, 0x73, 0x54, 0x00, 0xF5, 0x28, 0x04, 0x06, 0x70, 0x96, 0x02, 0x15, 0x19, 0x1C, 0x1E, 0x23, 0x00, 0xEC, 0xE0, 0x04, 0xD7, 0xF8, 0x73, 0xBF, 0xFF, 0xFF, 0x15, 0x09, 0x25, 0x60]
+    - [0x00, 0x0B, 0x0D, 0x21, 0x12, 0xBC, 0x18, 0x3E, 0x1A, 0x05, 0x24, 0xFA, 0x2F, 0xB3, 0x34, 0xD1, 0x4A, 0x52, 0x5E, 0xC0, 0x52, 0xDB, 0x73, 0x1A, 0x00, 0x00]
+    - [0x00, 0x0C, 0x23, 0xBF, 0x23, 0xD3, 0x23, 0xE7, 0x23, 0xF6, 0x24, 0x0F, 0x24, 0x23, 0x47, 0x73, 0x47, 0xB9, 0x47, 0xE1, 0x48, 0x09, 0x48, 0x36, 0x48, 0x59]
+    - [0x01]
+    - [0x05]
+    - [0x03, 0xF5, 0x28, 0x00, 0xA5, 0x03, 0x27, 0x49]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x02, 0x54]
+    - [0x07, 0x54]
+    - [0x04, 0x54]

tests/stc89c52rc.yml

@@ -0,0 +1,19 @@
+name: STC89C52RC programming test
+protocol: stc89
+code_data: [49, 50, 51, 52, 53, 54, 55, 56, 57]
+responses:
+    - [0x00, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE6, 0x25, 0xE2, 0x25, 0xE6, 0x43, 0x43, 0xFC, 0xF0, 0x02, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00]
+    - [0x8F, 0xFD, 0xF8, 0x02, 0x10, 0x28, 0x81]
+    - [0x8E, 0xFD, 0xF8, 0x02, 0x10, 0x28]
+    - [0x80]
+    - [0x80]
+    - [0x80]
+    - [0x80]
+    - [0x80]
+    - [0x80, 0x66]
+    - [0x80, 0x80]
+    - [0x80, 0x80]
+    - [0x80, 0x80]
+    - [0x8D, 0xFC, 0xFF, 0xF6, 0xFF]
+    - [0x10, 0xC0, 0x16, 0xF6, 0xFF, 0xF1, 0x03, 0xFF, 0x43, 0x43, 0xFC]
+    - [0x80]

tests/test_fuzzing.py

@@ -0,0 +1,119 @@
+#
+# Copyright (c) 2017 Grigori Goronzy <greg@chown.ath.cx>
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in all
+# copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+#
+
+"""Tests with fuzzing of input data"""
+
+import random
+import sys
+import unittest
+from unittest.mock import patch
+import yaml
+import stcgal.frontend
+import stcgal.protocols
+from tests.test_program import get_default_opts, convert_to_bytes
+
+class ByteArrayFuzzer:
+    """Fuzzer for byte arrays"""
+
+    def __init__(self):
+        self.rng = random.Random()
+        self.cut_propability = 0.01 # probability for cutting off an array early
+        self.cut_min = 0 # minimum cut amount
+        self.cut_max = sys.maxsize # maximum cut amount
+        self.bitflip_probability = 0.0001 # probability for flipping a bit
+        self.randomize_probability = 0.001 # probability for randomizing a char
+
+    def fuzz(self, inp):
+        """Fuzz an array of bytes according to predefined settings"""
+        arr = bytearray(inp)
+        arr = self.cut_off(arr)
+        self.randomize(arr)
+        return bytes(arr)
+
+    def randomize(self, arr):
+        """Randomize array contents with bitflips and random bytes"""
+        for i, _ in enumerate(arr):
+            for j in range(8):
+                if self.rng.random() < self.bitflip_probability:
+                    arr[i] ^= (1 << j)
+            if self.rng.random() < self.randomize_probability:
+                arr[i] = self.rng.getrandbits(8)
+
+    def cut_off(self, arr):
+        """Cut off data from end of array"""
+        if self.rng.random() < self.cut_propability:
+            cut_limit = min(len(arr), self.cut_max)
+            cut_len = self.rng.randrange(self.cut_min, cut_limit)
+            arr = arr[0:len(arr) - cut_len]
+        return arr
+
+class TestProgramFuzzed(unittest.TestCase):
+    """Special programming cycle tests that use a fuzzing approach"""
+
+    @patch("stcgal.protocols.StcBaseProtocol.read_packet")
+    @patch("stcgal.protocols.Stc89Protocol.write_packet")
+    @patch("stcgal.protocols.serial.Serial", autospec=True)
+    @patch("stcgal.protocols.time.sleep")
+    @patch("sys.stdout")
+    @patch("sys.stderr")
+    def test_program_fuzz(self, err, out, sleep_mock, serial_mock, write_mock, read_mock):
+        """Test programming cycles with fuzzing enabled"""
+        yml = [
+            "./tests/iap15f2k61s2.yml",
+            "./tests/stc12c2052ad.yml",
+            "./tests/stc15w4k56s4.yml",
+            "./tests/stc12c5a60s2.yml",
+            "./tests/stc89c52rc.yml",
+            "./tests/stc15l104w.yml",
+            "./tests/stc15f104e.yml",
+        ]
+        fuzzer = ByteArrayFuzzer()
+        fuzzer.cut_propability = 0.01
+        fuzzer.bitflip_probability = 0.005
+        fuzzer.rng = random.Random(1)
+        for y in yml:
+            with self.subTest(msg="trace {}".format(y)):
+                self.single_fuzz(y, serial_mock, fuzzer, read_mock, err, out,
+                                 sleep_mock, write_mock)
+
+    def single_fuzz(self, yml, serial_mock, fuzzer, read_mock, err, out, sleep_mock, write_mock):
+        """Test a single programming cycle with fuzzing"""
+        with open(yml) as test_file:
+            test_data = yaml.load(test_file.read())
+            for _ in range(1000):
+                with self.subTest():
+                    opts = get_default_opts()
+                    opts.protocol = test_data["protocol"]
+                    opts.code_image.read.return_value = bytes(test_data["code_data"])
+                    serial_mock.return_value.inWaiting.return_value = 1
+                    fuzzed_responses = []
+                    for arr in convert_to_bytes(test_data["responses"]):
+                        fuzzed_responses.append(fuzzer.fuzz(arr))
+                    read_mock.side_effect = fuzzed_responses
+                    gal = stcgal.frontend.StcGal(opts)
+                    self.assertGreaterEqual(gal.run(), 0)
+                    err.reset_mock()
+                    out.reset_mock()
+                    sleep_mock.reset_mock()
+                    serial_mock.reset_mock()
+                    write_mock.reset_mock()
+                    read_mock.reset_mock()

tests/test_program.py

@@ -0,0 +1,135 @@
+#
+# Copyright (c) 2017 Grigori Goronzy <greg@chown.ath.cx>
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in all
+# copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+#
+
+"""Tests that simulate a whole programming cycle"""
+
+import unittest
+from unittest.mock import patch
+import yaml
+import stcgal.frontend
+import stcgal.protocols
+
+def convert_to_bytes(list_of_lists):
+    """Convert lists of integer lists to list of byte lists"""
+    return [bytes(x) for x in list_of_lists]
+
+def get_default_opts():
+    """Get a default preconfigured option object"""
+    opts = unittest.mock.MagicMock()
+    opts.protocol = "stc89"
+    opts.autoreset = False
+    opts.port = ""
+    opts.baud = 19200
+    opts.handshake = 9600
+    opts.trim = 22118
+    opts.eeprom_image = None
+    opts.debug = False
+    opts.code_image.name = "test.bin"
+    opts.code_image.read.return_value = b"123456789"
+    return opts
+
+class ProgramTests(unittest.TestCase):
+    """Test MCU programming cycles for different families, based on traces"""
+
+    @patch("stcgal.protocols.StcBaseProtocol.read_packet")
+    @patch("stcgal.protocols.Stc89Protocol.write_packet")
+    @patch("stcgal.protocols.serial.Serial", autospec=True)
+    @patch("stcgal.protocols.time.sleep")
+    @patch("sys.stdout")
+    def test_program_stc89(self, out, sleep_mock, serial_mock, write_mock, read_mock):
+        """Test a programming cycle with STC89 protocol"""
+        self._program_yml("./tests/stc89c52rc.yml", serial_mock, read_mock)
+
+    @patch("stcgal.protocols.StcBaseProtocol.read_packet")
+    @patch("stcgal.protocols.Stc89Protocol.write_packet")
+    @patch("stcgal.protocols.serial.Serial", autospec=True)
+    @patch("stcgal.protocols.time.sleep")
+    @patch("sys.stdout")
+    def test_program_stc12(self, out, sleep_mock, serial_mock, write_mock, read_mock):
+        """Test a programming cycle with STC12 protocol"""
+        self._program_yml("./tests/stc12c5a60s2.yml", serial_mock, read_mock)
+
+    @patch("stcgal.protocols.StcBaseProtocol.read_packet")
+    @patch("stcgal.protocols.Stc89Protocol.write_packet")
+    @patch("stcgal.protocols.serial.Serial", autospec=True)
+    @patch("stcgal.protocols.time.sleep")
+    @patch("sys.stdout")
+    def test_program_stc12a(self, out, sleep_mock, serial_mock, write_mock, read_mock):
+        """Test a programming cycle with STC12A protocol"""
+        self._program_yml("./tests/stc12c2052ad.yml", serial_mock, read_mock)
+
+    def test_program_stc12b(self):
+        """Test a programming cycle with STC12B protocol"""
+        self.skipTest("trace missing")
+
+    @patch("stcgal.protocols.StcBaseProtocol.read_packet")
+    @patch("stcgal.protocols.Stc89Protocol.write_packet")
+    @patch("stcgal.protocols.serial.Serial", autospec=True)
+    @patch("stcgal.protocols.time.sleep")
+    @patch("sys.stdout")
+    def test_program_stc15f2(self, out, sleep_mock, serial_mock, write_mock, read_mock):
+        """Test a programming cycle with STC15 protocol, F2 series"""
+        self._program_yml("./tests/iap15f2k61s2.yml", serial_mock, read_mock)
+
+    @patch("stcgal.protocols.StcBaseProtocol.read_packet")
+    @patch("stcgal.protocols.Stc89Protocol.write_packet")
+    @patch("stcgal.protocols.serial.Serial", autospec=True)
+    @patch("stcgal.protocols.time.sleep")
+    @patch("sys.stdout")
+    def test_program_stc15w4(self, out, sleep_mock, serial_mock, write_mock, read_mock):
+        """Test a programming cycle with STC15 protocol, W4 series"""
+        self._program_yml("./tests/stc15w4k56s4.yml", serial_mock, read_mock)
+
+    @unittest.skip("trace is broken")
+    @patch("stcgal.protocols.StcBaseProtocol.read_packet")
+    @patch("stcgal.protocols.Stc89Protocol.write_packet")
+    @patch("stcgal.protocols.serial.Serial", autospec=True)
+    @patch("stcgal.protocols.time.sleep")
+    @patch("sys.stdout")
+    def test_program_stc15a(self, out, sleep_mock, serial_mock, write_mock, read_mock):
+        """Test a programming cycle with STC15A protocol"""
+        self._program_yml("./tests/stc15f104e.yml", serial_mock, read_mock)
+
+    @patch("stcgal.protocols.StcBaseProtocol.read_packet")
+    @patch("stcgal.protocols.Stc89Protocol.write_packet")
+    @patch("stcgal.protocols.serial.Serial", autospec=True)
+    @patch("stcgal.protocols.time.sleep")
+    @patch("sys.stdout")
+    def test_program_stc15l1(self, out, sleep_mock, serial_mock, write_mock, read_mock):
+        """Test a programming cycle with STC15 protocol, L1 series"""
+        self._program_yml("./tests/stc15l104w.yml", serial_mock, read_mock)
+
+    def test_program_stc15w4_usb(self):
+        """Test a programming cycle with STC15W4 USB protocol"""
+        self.skipTest("USB not supported yet, trace missing")
+
+    def _program_yml(self, yml, serial_mock, read_mock):
+        """Program MCU with data from YAML file"""
+        with open(yml) as test_file:
+            test_data = yaml.load(test_file.read())
+            opts = get_default_opts()
+            opts.protocol = test_data["protocol"]
+            opts.code_image.read.return_value = bytes(test_data["code_data"])
+            serial_mock.return_value.inWaiting.return_value = 1
+            read_mock.side_effect = convert_to_bytes(test_data["responses"])
+            gal = stcgal.frontend.StcGal(opts)
+            self.assertEqual(gal.run(), 0)

tests/test_utils.py

@@ -0,0 +1,76 @@
+#
+# Copyright (c) 2017 Grigori Goronzy <greg@chown.ath.cx>
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in all
+# copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+#
+
+"""Tests for utility functions and other misc parts"""
+
+import argparse
+import unittest
+from stcgal.utils import Utils, BaudType
+
+class TestUtils(unittest.TestCase):
+    """Test for utility functions in the Utils class"""
+
+    def test_to_bool(self):
+        """Test special utility function for bool conversion"""
+        self.assertTrue(Utils.to_bool(True))
+        self.assertTrue(Utils.to_bool("true"))
+        self.assertTrue(Utils.to_bool("True"))
+        self.assertTrue(Utils.to_bool("t"))
+        self.assertTrue(Utils.to_bool("T"))
+        self.assertTrue(Utils.to_bool(1))
+        self.assertTrue(Utils.to_bool(-1))
+        self.assertFalse(Utils.to_bool(0))
+        self.assertFalse(Utils.to_bool(None))
+        self.assertFalse(Utils.to_bool("false"))
+        self.assertFalse(Utils.to_bool("False"))
+        self.assertFalse(Utils.to_bool("f"))
+        self.assertFalse(Utils.to_bool("F"))
+        self.assertFalse(Utils.to_bool(""))
+
+    def test_to_int(self):
+        """Test wrapped integer conversion"""
+        self.assertEqual(Utils.to_int("2"), 2)
+        self.assertEqual(Utils.to_int("0x10"), 16)
+        with self.assertRaises(ValueError):
+            Utils.to_int("a")
+        with self.assertRaises(ValueError):
+            Utils.to_int("")
+        with self.assertRaises(ValueError):
+            Utils.to_int(None)
+
+    def test_hexstr(self):
+        """Test byte array formatter"""
+        self.assertEqual(Utils.hexstr([10]), "0A")
+        self.assertEqual(Utils.hexstr([1, 2, 3]), "010203")
+        with self.assertRaises(Exception):
+            Utils.hexstr([400, 500])
+
+class TestBaudType(unittest.TestCase):
+    """Test BaudType class"""
+
+    def test_create_baud_type(self):
+        """Test creation of BaudType instances"""
+        baud_type = BaudType()
+        self.assertEqual(baud_type("2400"), 2400)
+        self.assertEqual(baud_type("115200"), 115200)
+        with self.assertRaises(argparse.ArgumentTypeError):
+            baud_type("2374882")