Update packaging data for PyPI

This makes some minor adjustments, plus some general updates. In short:

* Mark stcgal as stable
* Make tqdm and pyserial requirements more specific
* Add a new long description, specific for PyPI
* Add documentation files to distribution

.travis.yml

@@ -11,7 +11,7 @@ python:
 before_install:
   - sudo apt install rpm dpkg-dev debhelper dh-python python3-setuptools fakeroot python3-serial python3-yaml
 install:
-  - pip install pyserial pyusb tqdm
+  - pip install pyusb
 script:
   - python setup.py build
   - python setup.py test

doc/INSTALL.md

@@ -3,8 +3,16 @@ Installation
 
 stcgal requires Python 3.2 (or later) and pySerial. USB support is
 optional and requires pyusb 1.0.0b2 or later. You can run stcgal
-directly with the included ```stcgal.py``` script. The recommended
-method for permanent installation is to use Python's setuptools. Run
-```./setup.py build``` to build and ```sudo ./setup.py install```
-to install stcgal. A permanent installation provides the ```stcgal```
-command.
+directly with the included ```stcgal.py``` script if the dependencies
+are already installed.
+
+There are several options for permanent installation:
+
+* Use Python3 and ```pip```. Run
+```pip3 install git+https://github.com/grigorig/stcgal.git```
+to install the latest version of stcgal globally on your system.
+This may require administrator/root permissions for write access
+to system directories.
+
+* Use setuptools. Run ```./setup.py build``` to build and
+```sudo ./setup.py install``` to install stcgal.

doc/PyPI.md

@@ -0,0 +1,18 @@
+stcgal - STC MCU ISP flash tool
+===============================
+
+stcgal is a command line flash programming tool for [STC MCU Ltd](http://stcmcu.com/).
+8051 compatible microcontrollers.
+
+STC microcontrollers have an UART/USB based boot strap loader (BSL). It
+utilizes a packet-based protocol to flash the code memory and IAP
+memory over a serial link. This is referred to as in-system programming
+(ISP).  The BSL is also used to configure various (fuse-like) device
+options. Unfortunately, this protocol is not publicly documented and
+STC only provide a (crude) Windows GUI application for programming.
+
+stcgal is a full-featured Open Source replacement for STC's Windows
+software; it supports a wide range of MCUs, it is very portable and
+suitable for automation.
+
+[See the GitHub page for more information](https://github.com/grigorig/stcgal).

setup.py

@@ -24,14 +24,15 @@
 import stcgal
 from setuptools import setup, find_packages
 
-with open("README.md", "r") as fh:
+with open("doc/PyPI.md", "r") as fh:
     long_description = fh.read()
 
 setup(
     name = "stcgal",
     version = stcgal.__version__,
     packages = find_packages(exclude=["doc", "tests"]),
-    install_requires = ["pyserial"],
+    data_files = [("doc", ["README.md", "doc/FAQ.md", "doc/MODELS.md", "doc/USAGE.md"])],
+    install_requires = ["pyserial>=3.0", "tqdm>=4.0.0"],
     extras_require = {
         "usb": ["pyusb>=1.0.0"]
     },
@@ -50,7 +51,7 @@ setup(
     license = "MIT License",
     platforms = "any",
     classifiers = [
-        "Development Status :: 4 - Beta",
+        "Development Status :: 5 - Production/Stable",
         "Environment :: Console",
         "Intended Audience :: Developers",
         "License :: OSI Approved :: MIT License",

stcgal/__init__.py

@@ -1 +1 @@
-__version__ = "1.4"
+__version__ = "1.5"

stcgal/frontend.py

@@ -214,7 +214,7 @@ def cli():
     # check arguments
     parser = argparse.ArgumentParser(formatter_class=argparse.RawDescriptionHelpFormatter,
                                      description="stcgal {} - an STC MCU ISP flash tool\n".format(stcgal.__version__) +
-                                                 "(C) 2014-2017 Grigori Goronzy\nhttps://github.com/grigorig/stcgal")
+                                                 "(C) 2014-2018 Grigori Goronzy and others\nhttps://github.com/grigorig/stcgal")
     parser.add_argument("code_image", help="code segment file to flash (BIN/HEX)", type=argparse.FileType("rb"), nargs='?')
     parser.add_argument("eeprom_image", help="eeprom segment file to flash (BIN/HEX)", type=argparse.FileType("rb"), nargs='?')
     parser.add_argument("-a", "--autoreset", help="cycle power automatically by asserting DTR", action="store_true")