9572de350a
Rework the timeout and network code to use libev.
1.6 KiB
1.6 KiB
README
RFC-5415 and RFC-5416 compliant CAPWAP WTP (and AC) implementation.
This fork is currently focusing on the WTP side only.
STATUS
NOTE: The WTP has been ported to libev, the AC has not been adjusted and is therefor broken for the moment.
WTP tested and working features:
- 802.11b
- 802.11g
- WMM/WME (mostly)
- Local MAC
- single radio, single WLAN mode
- 802.11n (draft-ietf-opsawg-capwap-extension-06)
Only cards with cfg80211 netlink API are supported and only ath9k cards (in particular Qualcomm Atheros AR5418) have been tested.
Planned WTP features:
- encryption (WPA2)
- Hybrid-MAC (RFC-7494)
INSTALLATION
Requirements
NOTE: To run WTP you must have a wireless card that has Linux driver based on the Generic IEEE 802.11 Networking Stack (mac80211).
- Linux 4.4 or newer
- automake 1.9 or newer
- autoconf
- libconfig-dev
- libjson0-dev
- libnl-dev
- libev-dev
- libtool
- libxml2-dev
- wolfssl 3.8 or newer
Build
WolfSSL:
./configure --enable-dtls --enable-ipv6 --enable-aesgcm \
--enable-aesccm --enable-aesni --enable-poly1305 \
--enable-ecc --enable-ecc25519 --enable-chacha \
--enable-supportedcurves --enable-dh --enable-psk \
--disable-des3 --disable-arc4 --prefix=/usr/
make
make install
SmartCAPWAP:
autoreconf -f -i
./configure --disable-ac
make
make install