6b4f2b1cc1
FossilOrigin-Name: 3899b9927349bb8ae5d66a2397bef593ae6be05fda446cfe9136ef433e9c7c0d
156 lines
3.0 KiB
Plaintext
156 lines
3.0 KiB
Plaintext
#
|
|
# AC-Tube default config file
|
|
#
|
|
|
|
|
|
# ---------------------------------------------------
|
|
# General settings
|
|
# ---------------------------------------------------
|
|
|
|
# ac_name
|
|
# The ac name reported by AC-Tube
|
|
# If ommited ac_name is build from macaddress.
|
|
#
|
|
# Default: ac_name =
|
|
|
|
|
|
# ac_id
|
|
# A unique ID for this AC
|
|
# If not specified, an id is build from macaddress.
|
|
#
|
|
# Default:
|
|
# ac_id =
|
|
|
|
# hardware_version
|
|
# Hardware version for the AC
|
|
# If ommited, the hardware version is build from
|
|
# the underlying OS
|
|
#
|
|
# Default:
|
|
# hardware_version =
|
|
|
|
# software_version
|
|
# Software version for this AC
|
|
# If not specified, the compiled in software version is used.
|
|
#
|
|
# Default:
|
|
# software_version =
|
|
|
|
|
|
# cisco_hardware_version
|
|
# Hardware version sent, when AC operates in cisco-mode
|
|
#
|
|
# Default:
|
|
# cisco_hardware_version = .x01000001
|
|
|
|
# cisco_software_version
|
|
# Software version sent, when operating in cisco-mode
|
|
#
|
|
# If ommited, the controller sends the same software version
|
|
# to the WTP as the WTP has sent in discovery or join
|
|
# request.
|
|
#
|
|
# Default:
|
|
# cisco_software_version =
|
|
|
|
|
|
|
|
# image_dir
|
|
# Directorie where firmware images are stored
|
|
#
|
|
# Default
|
|
# image_dir=/tftpboot
|
|
|
|
|
|
|
|
# ---------------------------------------------------
|
|
# Network related
|
|
# ---------------------------------------------------
|
|
|
|
# ipv4
|
|
# Use IPv4 protocol
|
|
#
|
|
# Default:
|
|
# ipv4=true
|
|
|
|
|
|
# ipv6
|
|
# Use IPv6 protocol
|
|
#
|
|
# Default:
|
|
# ipv6=true
|
|
|
|
|
|
# listen - Listen addresses
|
|
# If ommited, AC-Tube tries to find listen addresses by itself.
|
|
#
|
|
# Defalut:
|
|
# listen =
|
|
|
|
|
|
# ---------------------------------------------------
|
|
# SSL related stuff
|
|
# ---------------------------------------------------
|
|
|
|
# dtls_psk
|
|
# Specify a dtls pre-shared key
|
|
#
|
|
# Default: dtls_psk =
|
|
|
|
|
|
# ssl_key
|
|
# Certificate key file
|
|
#
|
|
# Default:
|
|
# ssl_key=
|
|
|
|
|
|
# ssl_key_pass
|
|
# Password to unlock key file
|
|
#
|
|
# Default:
|
|
# ssl_key_pass =
|
|
|
|
|
|
# ssl_cert
|
|
# SSL certificate that will be sent to the client
|
|
#
|
|
# Default:
|
|
# ssl_cert=
|
|
|
|
|
|
# dtls_verify_peer
|
|
# Verfify peer's certificate
|
|
#
|
|
# Default:
|
|
# dtls_verify_peer=true
|
|
|
|
|
|
# dbg
|
|
# Set debug level
|
|
#
|
|
# dbg = info # Show all kind of infos
|
|
# dbg += msg # CAPWAP messages
|
|
# dbg += msgelem # CAPWAP message elements
|
|
# dbg += msgelem_dmp # Print hex dump for capwap messages elements
|
|
# dbg += rfc # Show warnings if CAPWAP messages don't conform to RFC
|
|
# dbg += pkt_in # CAPWAP packets received
|
|
# dbg += pkt_out # CAPWAP packets sent
|
|
# dbg += pkt # CAPWAP packets both sent and received
|
|
# dpg += pkt_dmp # Hex dump CAPWAP packets.
|
|
# dbg += pkt_err # Show messages about malformed packets when detected
|
|
# dbg += msg_err # Be verbose about capwap message errors like re-transmission
|
|
# dbg += dtls # Messages concerning DTLS
|
|
# dbg += dtls_detail # DTLS in more detail
|
|
# dbg += dtls_bio # DTLS BIO operations
|
|
# dbg += dtls_bio_dmp # Hey dump data in BIO operations
|
|
#
|
|
# dbg += all # all of the above
|
|
# dbg += err # Same as dbg_err and pkt_err
|
|
#
|
|
# Default:
|
|
# dbg=
|
|
|
|
|
|
|