#  
# AC-Tube default config file
#


# ---------------------------------------------------
# General settings
# ---------------------------------------------------

# ac_name
# The ac name reported by AC-Tube
# If ommited ac_name is build from macaddress.
#
#Default: ac_name = Cisco80
ac_name = "TubesAC"

# ac_id
# A unique ID for this AC
# If not specified, an id is build from macaddress.
#
# Default:
# ac_id = 

# hardware_version
# Hardware version for the AC
# If ommited, the hardware version is build from 
# the underlying OS
# 
# Default: 
# hardware_version = 

# software_version
# Software version for this AC
# If not specified, the compiled in software version is used.
#
# Default:
# software_version =


# cisco_hardware_version
# Hardware version sent, when AC operates in cisco-mode
#
# Default: 
hardware_version = .x01000001

# cisco_software_version
# Software version sent, when operating in cisco-mode
#
# If ommited, the controller sends the same software version
# to the WTP as the WTP has sent in discovery or join 
# request.
#
# Default:
# cisco_software_version = 


# strict_capwap
#
# Strict CAPWAP protocol
# If set to YES, AC-Tube for example complains about any message 
# with missing mandatory elements.  
#
# Default: 
# strict_capwap = on
strict_capwap = off

# strict_headers
#
# If set to on, any malformed packets will be thrown away.
#
# Default: 
# strict_headers = on


# capwap_mode
#
# can be either "capwap" or "cipwap"
#
# If mode is set to "capwap", AC-Tube knows only to deal with *real* "CAPWAP"
# If mode is seto cipwap, AC-Tube tries to detec the connecting client. So 
# a Cisco WTP has a chance to connect. For Cisco WPTs this works only in conjunction
# with strict_headers = 0
#
# Default:
# capwap_mpode = capwap 
#

# image_dir
# Directorie where firmware images are stored
#
# Default
# image_dir=/tftpboot


# use_loopback
# 
# Let AC-Tube also listen on loopback interfaces in auto-detect mode.
# Turning this option on makes possibly only sense for some testing purpose.
#
# Default:
# use_loopback = off



# ---------------------------------------------------
# Network related 
# ---------------------------------------------------

# ipv4
# Use IPv4 protocol
#
# Default:
# ipv4=true


# ipv6
# Use IPv6 protocol
#
# Default: 
# ipv6=true


# listen - Listen addresses
# If ommited, AC-Tube tries to find listen addresses by itself.
#
# If set, the format for a listen address goes as follows:
# address:port/protocol
# Port or protocol can be ommited.
# Examples:
# listen = 10.0.3.1:5426/cawap	# listens for capwap on 10.3.0.1 port 5426
# listen += 10.3.0.1:8426	# listens for capwap (default) on 10.3.0. port 8426
# listen += 10.3.0.1/lwapp	# listens for lwapp on 10.3.0.1 port 12222(default)
# listen += [fe80::a00:27ff:fe6b:b8e3%em0]:5426/capwap # yes, its IPv6
#
# Currently as protocol only capwap is suppert
#
# Defalut: 
#listen = 192.168.0.14

# broadcast_listen - Broadcast listen address
# If ommited, the boraadcast listen adresses a determined automatically
# Otherwise, for address syntax, see listen.
#
# Default:
# broadcast_listen = 
#

# use_loopback
# Include loopback interfaces if listen addresses are auto detected
#
# Default:
# use_loopback = false


# ---------------------------------------------------
# SSL related stuff 
# ---------------------------------------------------

# dtls_psk
# Specify a dtls pre-shared key
#
# Default: dtls_psk = 


# ssl_key
# Certificate key file 
#
# Default:
ssl_key="../../ssl/certs/ac-cisco.key"


# ssl_key_pass
# Password to unlock key file
#  
# Default:
# ssl_key_pass =


# ssl_cert
# SSL certificate that will be sent to the client
#
# Default:
ssl_cert="../../ssl/certs/ac-cisco.pem"


# dtls_verify_peer
# Verfify peer's certificate
#
# Default:
# dtls_verify_peer=true


# dbg
# Set debug level
# 
 dbg =  info         	# Show all kind of infos
 dbg += msg_in        	# Incomming CAPWAP messages
 dbg += msg_out	# Outgoing CAPWAP messages
 dbg += msg_err      	# Be verbose about capwap message errors like re-transmission
 dbg += msg_dmp
 dbg += elem_in     	# CAPWAP message elements
 dbg += elem_out
 dbg += subelem		#
 dbg += elem_err	# Errors in message elements
 dbg += elem_dmp  	# Print hex dump for capwap messages elements
 dbg += rfc          	# Show warnings if CAPWAP messages don't conform to RFC
 dbg += pkt_in		# CAPWAP packets received
 dbg += pkt_out		# CAPWAP packets sent
 dbg += pkt          	# CAPWAP packets both sent and received
 dbg += pkt_dmp      	# Hex dump CAPWAP packets.
 dbg += pkt_err      	# Show messages about malformed packets when detected
# dbg += dtls         	# Messages concerning DTLS
# dbg += dtls_detail	# DTLS in more detail
# dbg += dtls_bio	# DTLS BIO operations
# dbg += dtls_bio_dmp	# HeXy dump data in BIO operations
 dbg += warn		# misc warnings	
 dbg += mod		# Debugs specific to  mod
 dbg += cfg_dmp
 dbg += all
#
# dbg += all         	# all of the above
# dbg += err          	# Same as dbg_err and pkt_err
#
# Default:
# dbg=

# mods
# List of modsules to load. These modules asked from left to right, if theay can
# handle discovery or jon request messages.  The module witch gibves a positive 
# answer first will handle a connectio. So the ordering is important. 
# 
# Default:
# mods = { capwap, capwap80211 }
#

#mods = { cisco, capwap }
mods = { cisco,  capwap, capwap80211 }
#, capwap80211 }

mods_dir = ../../lib