Terms used by Cisco, CAPWAP, LWAPP and others ... Slot ID = Radio ID AC = MWAR = WLC AP = RAD = WTP 2. Cisco MWAR Addr Address of AC 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | MWAR Type | Address | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Adress | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 2 for MWAR Addr Length: 7 MWAR Type: 0 SPAM Normal MWAR 1 SPAM Master MWAR Address: IPv4 Address of AC Usage of this field differs from LWAPP where the MAC address of AP is stored in the Address field. (See RFC 5412 - Message type 2: AC Address) 7. Cisco Add WLAN Similar to LWAP 802.11 Add WLAN (RFC 5412) 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Radio ID | WLAN Capability | WLAN ID | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Encryption Policy | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Key ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Key Index | Shared Key | WPA Data Len |WPA IE Data ...| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RSN Data Len |RSN IE Data ...| Reserved .... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | WME Data Len |WME IE Data ...| 11e Data Len |11e IE Data ...| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | QoS | Auth Type |Broadcast SSID | Reserved... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | WLAN name (33 bytes) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | SSID ... | +-+-+-+-+-+-+-+-+ 8. Cisco WTP Radio Configuration See RFC 5412 - LWAPP 80211 WTP WLAN Radio Configuration. This Cisco CAPWAP element is slightly different from LWAPP. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Radio ID | CFG Type | Occupancy Limit | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CFP Period | CFP Maximum Duration | BSS ID | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | BSS ID | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | BSS ID | Beacon Period | Country Str1 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Country Str1 | Country String 2 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Countr Str2 | gPeriod | Reg(?) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Reg(?) | ? | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 8 Length: 28 Radio ID: An 8-bit value representing the radio to configure. Config Type: 0 = Automatic Occupancy Limit: This attribute indicates the maximum amount of time, in Time Units (TUs), that a point coordinator MAY control the usage of the wireless medium without relinquishing control for long enough to allow at least one instance of Distributed Coordination Function (DCF) access to the medium. The default value of this attribute SHOULD be 100, and the maximum value SHOULD be 1000. CFP Period: The attribute describes the number of DTIM intervals between the start of Contention-Free Periods (CFPs). CFP Maximum Duration: The attribute describes the maximum duration of the CFP in TU that MAY be generated by the Point Coordination Function (PCF). BSSID: The WLAN Radio's base MAC address. For WTPs that support more than a single WLAN, the value of the WLAN Identifier is added to the last octet of the BSSID. Therefore, a WTP that supports 16 WLANs MUST have 16 MAC addresses reserved for it, and the last nibble is used to represent the WLAN ID. Beacon Period: This attribute specifies the number of TUs that a station uses for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames. Country Code: This attribute identifies the country in which the station is operating. The first two octets of this string is the two-character country code as described in document ISO/IEC 3166- 1. The third octet MUST be one of the following: 1. an ASCII space character, if the regulations under which the station is operating encompass all environments in the country, 2. an ASCII 'O' character, if the regulations under which the station is operating are for an outdoor environment only, or /* DTIM Period: This attribute specifies the number of Beacon intervals that elapses between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. */ 28. IEEE 802.11 Delete WLAN Same as element type 28 specified in RFC 5412 (LWAPP) 54. Cisco AP Mode and Type The AP Mode and Type message element is used to configure a WTP to operate in a specific mode. 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Mode | Type | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 54 for AP Mode and Type Length: 2 Mode: An 8-bit value describing the type of information being sent. The following values are supported: 0 - Split MAC / Local Mode 1 - Monitor 2 - Local MAC / FlexConnect 3 - Rogue Detector 4 - Sniffer Type: AP Type 0 - ? // 4 - ? // Legacy AP ? 83. Cisco AP IP Address The IPv4 configuration of the WTP 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | IP Address | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Netmask | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Default Gateway | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Reserved ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Reserved | +-+-+-+-+-+-+-+-+ Type: 83 Length: 16 IP Address: The IP address of AP Netmask: Netmask Default Gateway: default gateway Type: 1=Static 0=DHCP Reserved: (?) 91. Cisco AC Name with Index Same as AC Name with Priority, defined in CAPWAP RFC 5415. The AC Name with Priority message element is sent by the AC to the WTP to configure preferred ACs. The number of instances of this message element is equal to the number of ACs configured on the WTP. The WTP also uses this message element to send its configuration to the AC. 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Index | AC Name... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 91 for AC Name with Index Length: >= 2 Priority: A value between 1 and 255 specifying the priority order of the preferred AC. For instance, the value of one (1) is used to set the primary AC, the value of two (2) is used to set the secondary, etc. AC Name: A variable-length UTF-8 encoded string [RFC3629] containing the AC name, whose maximum size MUST NOT exceed 512 bytes. //108. Cisco Mesh Stats??? 108. Cisco AP Uptime Sent by the WTP this message element gibes information about the uptime of the WTP. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Current Uptime | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Last Uptime | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 108 Length: 8 ? 125. SPAM AP LED State 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | LEDState | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 125 Length: 2 LEDState: 1 = Enabeled 0 = Disabled (?) 126. Cisco AP Regulatory Domain //bandId[0], regDomainSet[1], regDomainSlotId[0], regDomainCode0:[0], regDomainCode1:[1] 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Band ID | regDomainSet | RegDomainSlot | RegDomainCode0 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RegDomainCode1| +-+-+-+-+-+-+-+-+ Type: 126 Length: 5 127. AP Model +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | AP Model Name 30 Bytes ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... AP Model Name | Model Version 30 Bytes ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 128. Cisco Reset Button State The state of the reset button 0 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ | ResetBtnState | +-+-+-+-+-+-+-+-+ Type: 128 for Cisco Reset Button State Length: 1 ResetBtnState: 1 = Enabeled 0 = Disabled (?) 151. Cisco AP Time Sync +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Unix timestamp | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | +-+-+-+-+-+-+-+-+ Type: 151 Unix timestamp: Time in seconds since 1.1.1970 Type: Time type 0 = Manual (?) 169. Cisco AP IP Domain 170. Cisco AP IP Name Server 183. Cisco Backup OS Version Version of backup software image. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Version ... (6 Bytes) +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... Version | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 207. Cisco Board Data Options The Cisco Board Data element is present in Discovery Request and Join Request messages sent by the WTP. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ANT Type | FlexConnect | AP Type | Join Priority | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 207 Length: 4 FlexConnect: 00 = FlexConnect not supported 01 = FlexConnect supported 208. Cisco MWAR Type 0 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ | MWAR Type | +-+-+-+-+-+-+-+-+ MWAR Type: 00 = Normal MWAR 01 = Normal MWAR 02 = Configured MWAR 213. Csico 802.11 Assoc Limit 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | enable | assocLimit | assocInterval | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 214. Same as 213 (?) 215. Cisco TLV Payload 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Data ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 0x0133: FLEX_MCUC_GROUP_CFG (?) 0x0184: Band Select (?) 0x012e: Jumbo MTU Payload 224. Cisco AP Log Facility 0 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ | Log Facility | +-+-+-+-+-+-+-+-+ 240. Cisco AP Retransmit Param 0 1 2 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Counter Type | Set | Value | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 240 Length: 4 Counter Type: 1 = Retransmit Count 2 = Retransmit Interval Set: 1 = Set 2 = Unset (?) Value: Value to set. 249. Cisco AP Venue Settings 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Reserved(?) | Venue Group | Venue Type | Language ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... Language | Venue Name ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 254. Cisco SPAM AP LED Flash Config LWAPP ===== In this section Cisco vendor specific message elements used in LWAPP are listed. (See RFC5412, message element type 104). Some of these elements are used by Cisco in CAPWAP where the vendor specific LWAPP message element is encapsulated in a vendor specific CAPWAP message element. So in CAPWAP we see headers like this: Vendor spec CAPWAP | Vedor spec LWAPP | Vendor specific LWAPP data 00 40 96 00 00 68 | 00 40 96 00 00 86 | ... 18. Cisco AP Username Password (LWAPP 104) 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Username (33 bytes) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... Username | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Password Hash 1 ... (121 bytes) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... PAssword Hash 1 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Password Hash 2 ... (121 bytes) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... PAssword Hash 2 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Reserved(?) | Type (?) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Username: 0-terminated username, the field has to filled up with zeros. Password 1: Password Password 2: Password Type: 01 = Telnet/SSH Username and Password 02 = 802.1x Supplicant Credentials 21. Radio Module Info (?) (LWAPP 104) 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Radio Module | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Radio Module: Number of Radio Model, what the info is for 0xff = Radio Board Info (?) 34. Cisco AP Ethernet Port Subtype (LWAPP) 0 1 2 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- | Duplex | Speed | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- Type: 34 Length: 3 36. Cisco AP Loghohost and Last Joined Controller (LWAPP 104) 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | IPv4 Address of Loghost | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Name of last joined controller (32 Bytes) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 44. Cisco AP Telnet SSH (LWAPP) 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Set | Type | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 44 Length: 2 Type: 0=Telnet 1=SSH Set: 0=Disable 1=Enable 67. AP Submode (LWAPP) 0 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ | Submode | +-+-+-+-+-+-+-+-+ Type: 67 73. Cisco Path MTU (LWAPP) 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Data length | Padding | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Padding data .. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 73 Length: >=4 74. Cisco DTLS Data Config (LWAPP) 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | DTLS Data cap |DTLS Data en. | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 74 Length: 2 DTLS Data cab: 0: not capable 1: capabale DTLS Data en 0: DTLS Data disabled 1: DTLS Data enabled 85. Cisco Primed Join Timeout (LWAPP) 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tiemout | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 85 Timeout: Timeout in seconds 132. Cisco MM MWAR Hash Config 133. Cisco SSC Hash Validation (LWAPP) 0 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ | HashValidtn | +-+-+-+-+-+-+-+-+ Type: 133 Length: 1 HashValidtn: 1=On (?) 0=Off (?) 134. Cisco MWAR Hash Value (LWAPP) 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Hash ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Hash: ASCII string witch represents in hexadecimal notation the SHA1 hash of the device certificate. 135. Dot11R WLC MAC and IP (LWAPP) +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | WLC IP Address | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | WLC MAC Address ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ... WLC MAC Address | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 139. Hardware Info (?) +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RAM Description (32 Bytes) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... RAM Description | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RAM size | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Flash Size(?) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Processor Description ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ RAM Descriptrion: ASCII String describing the installed RAM, zero terminated, zero filled till byte 32. RAM size: Size of RAM in bytes Flash Size: Processor Description: ASCII String describing the processor 166. Cisco AP Join IP Pref Mode (LWAPP) 0 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ | Flags | +-+-+-+-+-+-+-+-+ Type: 166 Length: 1