Cycling power: done
Waiting for MCU: done
Protocol detected: stc8
Target model:
  Name: STC8F2K08S2
  Magic: F641
  Code flash: 8.0 KB
  EEPROM flash: 56.0 KB
Target frequency: 0.000 MHz
Target BSL version: 7.3.10U
Target wakeup frequency: 34.950 KHz
Target ref. voltage: 1340 mV
Target mfg. date: 2018-05-22
Target options:
  reset_pin_enabled=False
  clock_gain=high
  watchdog_por_enabled=False
  watchdog_stop_idle=True
  watchdog_prescale=64
  low_voltage_reset=False
  low_voltage_threshold=2
  eeprom_erase_enabled=True
  bsl_pindetect_enabled=False
  por_reset_delay=long
  rstout_por_state=high
  uart1_remap=False
  uart2_passthrough=False
  uart2_pin_mode=normal
  epwm_open_drain=False
  program_eeprom_split=29440
Loading flash: 80 bytes (Intel HEX)
<- Packet data: 46 B9 68 00 30 50 FF FF FF FF 8F 00 04 FF FF 8B FD FF 27 38 F5 73 73 55 00 F6 41 0A 88 86 6F 8F 08 20 20 20 01 00 00 20 05 3C 18 05 22 32 FF 12 12 16
Protocol error: uncalibrated, please provide a trim value
-> Packet data: 46 B9 6A 00 07 FF 01 70 16
Disconnected!