Source: stcgal
Section: electronics
Priority: optional
Maintainer: Andrew Andrianov <andrew@ncrmnt.org>
Build-Depends: debhelper (>= 9), python3, python3-setuptools, dh-python
Standards-Version: 3.9.5
Homepage: https://github.com/grigorig/stcgal
X-Python3-Version: >= 3.2

Package: stcgal
Architecture: all
Depends: ${misc:Depends}, python3, python3-serial
Recommends: python3-usb (>= 1.0.0~b2)
Description: STC MCU ISP flash tool
 stcgal is a command line flash programming tool for STC MCU Ltd.
 8051 compatible microcontrollers. The name was inspired by avrdude.
 .
 STC microcontrollers have an UART/USB based boot strap loader (BSL). It
 utilizes a packet-based protocol to flash the code memory and IAP
 memory over a serial link. This is referred to as in-system programming
 (ISP). The BSL is also used to configure various (fuse-like) device
 options. Unfortunately, this protocol is not publicly documented and
 STC only provide a (crude) Windows GUI application for programming.
 .
 stcgal is a full-featured Open Source replacement for STC's Windows
 software; it supports a wide range of MCUs, it is very portable and
 suitable for automation.