Update version to 1.2

debian/changelog

@@ -1,3 +1,10 @@
+stcgal (1.2) unstable; urgency=low
+
+  * Update to 1.2
+  * Add optional python3-usb dependency
+
+ -- Grigori Goronzy <greg@chown.ath.cx>  Fri, 20 May 2016 03:21:25 +0200
+
 stcgal (1.0git) unstable; urgency=low
 
   * Initial Debianized Release

debian/control

@@ -10,17 +10,17 @@ X-Python3-Version: >= 3.2
 Package: stcgal
 Architecture: all
 Depends: ${misc:Depends}, python3, python3-serial
+Recommends: python3-usb (>= 1.0.0~b2)
 Description: STC MCU ISP flash tool
- stcgal is a command line flash programming tool for STC MCU Ltd. 8051
- compatible microcontrollers. The name was inspired by avrdude.
+ stcgal is a command line flash programming tool for STC MCU Ltd.
+ 8051 compatible microcontrollers. The name was inspired by avrdude.
  .
- STC microcontrollers have a UART based boot strap loader (BSL). It
- utilizes a packet-based protocol to flash the code memory and
- IAP memory over a serial link. This is referred to as in-system
- programming (ISP). The BSL is also used to configure various
- (fuse-like) device options. Unfortunately, this protocol is not
- publicly documented and STC only provide a (crude) Windows GUI
- application for programming.
+ STC microcontrollers have an UART/USB based boot strap loader (BSL). It
+ utilizes a packet-based protocol to flash the code memory and IAP
+ memory over a serial link. This is referred to as in-system programming
+ (ISP). The BSL is also used to configure various (fuse-like) device
+ options. Unfortunately, this protocol is not publicly documented and
+ STC only provide a (crude) Windows GUI application for programming.
  .
  stcgal is a full-featured Open Source replacement for STC's Windows
  software; it supports a wide range of MCUs, it is very portable and

stcgal/__init__.py

@@ -1 +1 @@
-__version__ = "1.0"
+__version__ = "1.2"