02e8d534b5
The TX path will overwrite the TID based on the SKB priority. Load the QoS TID from 802.11 frames into the skb priority to preserve it during TX handling.
README
RFC-5415 and RFC-5416 compliant CAPWAP WTP (and AC) implementation.
This fork is currently focusing on the WTP side only.
STATUS
NOTE: The WTP has been ported to libev, the AC has not been adjusted and is therefor broken for the moment.
WTP tested and working features:
- 802.11b
- 802.11g
- 802.11a
- WMM/WME (mostly)
- Local MAC
- single radio, single WLAN mode
- 802.11n (draft-ietf-opsawg-capwap-extension-06)
Only cards with cfg80211 netlink API are supported. The following devices have been tested:
- Atheros AR9280 (Compex WLE200NX)
- Mediatek MT7602E, MT7612E (ZBT WG2626, ALL-WR1200AC_WRT)
Planned WTP features:
- encryption (WPA2)
- Hybrid-MAC (RFC-7494)
INSTALLATION
Requirements
NOTE: To run WTP you must have a wireless card that has Linux driver based on the Generic IEEE 802.11 Networking Stack (mac80211).
- Linux 4.4 or newer
- automake 1.9 or newer
- autoconf
- libconfig-dev
- libjson0-dev
- libnl-dev
- libev-dev
- libtool
- libxml2-dev
- wolfssl 3.8 or newer
Build
WolfSSL:
./configure --enable-dtls --enable-ipv6 --enable-aesgcm \
--enable-aesccm --enable-aesni --enable-poly1305 \
--enable-ecc --enable-ecc25519 --enable-chacha \
--enable-supportedcurves --enable-dh --enable-psk \
--disable-des3 --disable-arc4 --prefix=/usr/
make
make install
SmartCAPWAP:
autoreconf -f -i
./configure --disable-ac
make
make install